作网络图(一、Windows+Python+iGraph)

wslhs

　　主要参考资料: (python-igraph's documentation)
　　http://hal.elte.hu/~nepusz/development/igraph/tutorial/index.html

　　一、iGraph的安装


　　参考  http://hal.elte.hu/~nepusz/development/igraph/tutorial/install.html#igraph-on-windows
　　      igraph
is primarily a library written in C. It is not
a standalone program, nor it is
a Python package that you can just drop on your Python path to start using it. Therefore,
if you would like to exploit igraph
‘s functionality in Python, you must install
a few packages. Do not worry, though, there are precompiled packages for the major operating
systems, so you will not have to compile igraph
from source unless you use an esoteric
operating system or you have specific requirements (i.e., adding a custom patch to igraph
‘s
C core). Precompiled packages are often called binary packages
, while the raw source code
is usually referred to as the source package
.
　　
In general, you should almost always opt for the binary package unless a binary package is not
available for your platform or you have some local modifications that you want to incorporate
into igraph
‘s source.

Installation from a binary package
　　在此之前，先要安装Python的合适版本，因为某些版本没有对应的igraph和cairo（我用python-2.5.2.msi）







igraph
on Windows：igraph被安装到C:\Python25\Lib\site-packages\igraph中
　　There is a Windows installer for igraph
‘s Python interface on the
Python Package Index
.
Download the one that is suitable for your Python version (currently
there are binary packages for Python 2.4 and Python 2.5, though it
might change in the future）（我用的是python-igraph-0.5.1.win32-py2.5.exe）

. To test the installed package, launch
your favourite Python IDE and type the following:

>>> import igraph.test
>>> igraph.test.test() 



　　The above commands run the bundled test cases to ensure that everything
is fine with your igraph
installation.




Graph plotting in igraph
on Windows：cairo和dll被安装到C:\Python25\Lib\site-packages\cairo中
　　Graph plotting in igraph
is implemented using a third-party package
called Cairo


. If you want to create
publication-quality plots in igraph
on Windows, you must also install
Cairo and its Python bindings. The Cairo project does not provide
pre-compiled binaries for Windows, but other projects depending on
Cairo do, so the preferred way to install Cairo on Windows along with
its Python bindings is as follows:

• Get the latest PyCairo for Windows installer from
  http://ftp.gnome.org/pub/gnome/binaries/win32/pycairo/1.8
  . Make sure you
  grab the one that matches your Python version. At the time of writing,
  the above folder contained installers for Python 2.6 only. You may
  also try and go one level up, then down then 1.4 subfolder – these are
  older versions, but they work with Python 2.5 and Python 2.6 as well.
  
• 
  Install PyCairo using the installer
  
  .(我用的是pycairo-1.4.12-2.win32-py2.5.exe)
  
  The installer extracts the necessary
  files into Lib\site-packages\cairo
  
  within the folder where Python is
  installed. Unfortunately there are some extra DLLs which are required to
  make Cairo work, so we have to get these as well.
  
• Head to http://ftp.gnome.org/pub/gnome/binaries/win32/dependencies/
  and get
  the binary versions of Cairo (cairo_1.8.10-3_win32.zip
  
  at the time of
  writing), Fontconfig (fontconfig_2.8.0-2_win32.zip
  
  ), Freetype
  (freetype_2.4.4-1_win32.zip
  
  ), Expat (expat_2.0.1-1_win32.zip
  
  ),
  libpng
  
  (libpng_1.4.3-1_win32.zip
  
  ) and zlib
  
  (zlib_1.2.5-2_win32.zip
  
  ).  Version numbers may vary, so be
  adaptive! Each ZIP file will contain a bin
  
  subfolder with a DLL file in
  it. Put the following DLLs in Lib\site-packages\cairo
  
  within your Python
  installation:
  
  
  
  
  • 
    freetype6.dll
    
    (from freetype_2.4.4-1_win32.zip
    
    )
    
  • 
    libcairo-2.dll
    
    (from cairo_1.8.10-3_win32.zip
    
    )
    
  • 
    libexpat-1.dll
    
    (from expat_2.0.1-1_win32.zip
    
    )
    
  • 
    libfontconfig-1.dll
    
    (from fontconfig_2.8.0-2_win32.zip
    
    )
    
  • 
    libpng14-14.dll
    
    (from libpng_1.4.3-1_win32.zip
    
    )
    
  • 
    zlib1.dll
    
    (from zlib_1.2.5-2_win32.zip
    
    ).
    
  
  
  

　　Having done that, you can launch Python again and check if it worked:

>>> from igraph import *
>>> g = Graph.Famous("petersen")
>>> plot(g) 







　　---------------------------------------------------------------------------------------------------------------------------------
　　注意：在运行时，我遇到了如下错误，最后发现时没有将cairo的dll加入环境变量path

　　下面是解决这个问题时参考的文档：

Hi, I have just installed igraph and I am having a problem with plotting.
I have followed the instructions on the documentation site
http://www.cs.rhul.ac.uk/home/tamas/development/igraph/tutorial/install.html#graph-plotting-in-igraph-on-windows
which includes installing pycairo, and putting the required dll files into
Python2.6\Lib\site-packages\cairo
igraph itself has installed properly, as running
>>> import igraph.test
>>> igraph.test.test()
gives no errors, and all tests work.
However, when I try to run
from igraph import *
g = Graph.Famous("petersen")
summary(g)
plot(g)
I get the following error:
Traceback (most recent call last):
File "C:\Documents and Settings\fulford\Desktop\netstuff\test1.py", line 4,
in <module>
plot(g)
File "C:\Python26\lib\site-packages\igraph\drawing.py", line 762, in plot
result = Plot(target, bbox)
File "C:\Python26\lib\site-packages\igraph\drawing.py", line 222, in __init__
self._surface_was_created=not isinstance(target, cairo.Surface)
File "C:\Python26\lib\site-packages\igraph\drawing.py", line 51, in
__getattr__
raise TypeError, "plotting not available"
TypeError: plotting not available
I also tried the following:
import cairo
but got the error:
Traceback (most recent call last):
File "<pyshell#2>", line 1, in <module>
import cairo
File "C:\Python26\lib\site-packages\cairo\__init__.py", line 1, in <module>
from _cairo import *
ImportError: DLL load failed: The specified module could not be found.
I am fairly new to python, so am wondering if there is something else I needed
to do, like add something to my path variable so that the dll files are found?
Any help or suggestions anyone can give me would be much appreciated, sicve I
would very much like to use this software. .
Thanks Glenn.
PS platform details:
Platform: Windows XP
Python version 2.6 (32 bitr) (enthought python distribution 6.2)

Dr Glenn Fulford  +61 7 313 85196 QUT Mathematical Sciences,
GPO Box 2343 Brisbane, Qld AUSTRALIA 4001.     Cricos no. 00213J
email: address@hidden;
-------------------------------------------------------------------------------------
Dear Glenn,
It seems like the Python bindings of Cairo are not installed properly on
your machine -- igraph simply reports this when it says "plotting not
available".
I checked a working installation on Windows XP (32-bit) and the
following files should be present in
c:\python26\lib\site-packages\cairo:
__init__.py
_cairo.pyd
libcairo-2.dll
libexpat-1.dll
libfontconfig-1.dll
libpng14-14.dll
zlib1.dll
The error message you see means that Python finds __init__.py in the
cairo subfolder successfully, and it tries to import _cairo.pyd from
there. (.pyd files are like ordinary .dll files, Python just uses a
different extension to distinguish them from .dlls). Unfortunately the
import can fail for at least two reasons:
1) _cairo.pyd itself is missing
2) _cairo.pyd is there, but one of its dependencies is missing.
Unfortunately, the error message is the same in both cases. So, I'd do
the following:
1. Check whether all the files I mentioned above are in the
site-packages\cairo folder. If not, install them.
2. If they are all there, download Dependency Walker from
www.dependencywalker.com and open _cairo.pyd with it. Dependency Walker
should recursively traverse the dependency tree of _cairo.pyd and report
any other DLLs that you are missing.
--
Tamas
-------------------------------------------------------------------------------------
Dear Tamas,
thanks very much for your suggestions. I beleive I eventiually tracked down the
problem.
I found the following web page very useful.
http://alex.matan.ca/install-cairo-wxpyton-pycairo-python-windows
First thing it told me was to append c:\Python26\Lib\site-packages\cairo to my
path, which I hadn't done, but this didn't fix the problem.
I then reinstalled the dll files, this time from  the wxpythion site. Thiat
seemed to fix the problem. So not surre exactly which dll it was, but I can
compare themn if anyone is interested.
Glenn
 　　二、iGraph使用


　　参考这里 http://www.cs.rhul.ac.uk/home/tamas/development/igraph/tutorial/tutorial.html