今天领导让我启动Hp9000小型机的过程,仅以记录,已备后用。
通过MP卡启动、关闭电源 Hp9000小型机的方式
启动:
1.MP登陆
MP login: Admin
MP password:
* Your connection is via Telnet. For improved security this MP *
* now supports SSH-2. Telnet can be disabled via the SA command. *
(c) Copyright 2007 Hewlett-Packard Development Company, L.P.
Welcome to the
Management Processor
HP 9000 and Integrity Superdome Server SD16B
MP MAIN MENU:
CO: Consoles
VFP: Virtual Front Panel
CM: Command Menu
CL: Console Logs
SL: Show Logs
FW: Firmware Update
HE: Help
X: Exit Connection
2.选择控制台命令
[SD4-MP] MP> CM
Enter HE to get a list of available commands
(Use <Ctrl-b> to return to main menu.)
3.重启服务
[SD4-MP] MP:CM> rs
This command resets the selected partition.
WARNING: Execution of this command irrecoverably halts all system
processing and I/O activity and restarts the selected
partition.
4.选择分区并确认
# Name
--- ----
0) Partition 0 - UX
1) Partition 1
2) Partition 2
3) Partition 3
Select a partition number: 1
Do you want to reset partition number 1? (Y/[N]) y
-> The selected partition will be reset.
[SD4-MP] MP:CM>
关闭电源:
1.登陆MP卡
MP login: Admin
MP password:
* Your connection is via Telnet. For improved security this MP *
* now supports SSH-2. Telnet can be disabled via the SA command. *
(c) Copyright 2007 Hewlett-Packard Development Company, L.P.
Welcome to the
Management Processor
HP 9000 and Integrity Superdome Server SD32B
MP MAIN MENU:
CO: Consoles
VFP: Virtual Front Panel
CM: Command Menu
CL: Console Logs
SL: Show Logs
FW: Firmware Update
HE: Help
X: Exit Connection
2.登陆控制台
[SD1-MP] MP> CM
Enter HE to get a list of available commands
(Use <Ctrl-b> to return to main menu.)
3.查看帮助
[SD1-MP] MP:CM> HE
Management Processor (MP) - FW Revision 026.003.001, Oct 10 2008 at 08:35:41
Supported firmware-updateable entity combination: Recipe 8.7f
The following are the service commands that are available
BO : Boot a partition.
DF : Display FRU information of an Entity.
MA : Return to the Main menu.
PE : Power entities on or off.
RE : Reset entity.
RR : Reset a partition for reconfiguration.
RS : Reset a partition.
TC : Send a TOC signal to a partition.
TE : Broadcast a message to all users of the MP Command Handler.
VM : Margin the voltage in a cabinet
WHO : Display a list of MP connected users
4.退出帮助:
Press q to quit or <CR> to continue...q
4.关闭电源
[SD1-MP] MP:CM> PE
This command controls power enable to a hardware device.
B - Cabinet
C - Cell
X - Complex
I - IO Chassis
P - Partition
Select Device: P
5.选择分区并确认
# Name
--- ----
0) Partition 0 - UX
1) Partition 1
2) Partition 2
Select a partition number: 1
The power state is ON for partition 1.
In what state do you want the power? (ON/OFF) OFF