设为首页 收藏本站
查看: 446|回复: 0

[经验分享] gophercloud openstack networking 源码分析

[复制链接]
发表于 2017-6-26 18:34:46 | 显示全部楼层 |阅读模式
  1、network 部分
  // Package networks contains functionality for working with Neutron network resources.
  // A network is an isolated virtual lay-2 broadcast domain that is typically reserved for
  // the tenant who created it (unless you configure the network to be shared). Tenants
  // can create multiple networks until the thresholds per-tenant quota is reached
  //
  // In the v2.0 Networking API, the network is the main entity. Ports and subnets are
  // always associated with a networ
  // networking/v2/networks/requests.go
  // Create accepts a CreateOpts struct and creates a new network using the values
  // provided. This operation does not actually require a request body , i.e. the
  // CreateOpts struct argument can be empty.
  //
  // The tenant ID that is containd in the URI is the tenant that creates the network.
  // An admin user, however, has the option of specifying another tenant ID in the
  // CreateOpts struct.
  1、func Create(c *gophercloud.ServiceClient, opts CreateOptsBuilder)
  1、首先调用b, err := opts.ToNetworkCreateMap(),将CreateOpts结构转换为一个map
  2、调用_, r.Err = c.Post(createURL(c), b, &r.Body, nil)
  CreateOpts结构如下所示:
  type CreateOpts struct {
  AdminStateUp    *bool
  Name         string
  Shared        *bool
  TenantID       string
  }
  2、router部分
  // networking/v2/extensions/layer3/routers/requests.go
  // Create accepts a CreateOpts struct and uses the values to create a new
  // logical router. When it is created, the router does not have an inernal interface -
  // it is not associated to any subnet.
  //
  // You can optionally specify an external gateway for a router using the
  // GatewayInfo struct. The external gateway for the router must be plugged into
  // an external network (it is external if its `router:external` field is set to true)
  func Create(c *gophercloud.ServiceClient, opts CreateOptsBuilder) (r CreateResult)
  // networking/v2/extensions/layer3/routers/requests.go
  // AddInterface attaches a subnet to an internal router interface. You must specify
  // either a SubnetID or PortID in the request body. If you specify both, the operation
  // will fail and an error will be returned
  //
  // If you specify a SubnetID, the gateway IP address for that particular subnet is
  // used to create the router interface. Alternatively, if you specify a PortID, the IP
  // address associated with the port is used to create the router interface.
  //
  // If you reference a port that is associated with multiple IP addresses, or if the port
  // is associated with zero IP addresses, the operation will fail and a 400 Bad Request
  // error will be returned.
  //
  // If you reference a port already in use, the operation will fail and a 409 Conflict
  // error will be returned.
  //
  // The PortID that is returned using Extract() on the result of this operation can
  // either be the same PortID passed in or, on the other hand, the identifier of a new
  // port created by this operation. After the operation completes, the device ID of the
  // port is set to the router ID, and the device owner attribute is set to
  // `network:router_interface`.
  func AddInterface(c *gophercloud.ServiceClient, id string, opts AddInterfaceOptsBuilder) (r InterfaceResult)
  3、subnet部分
  // Package subnets containsj functionality for working with Neutron subnet resources
  // A subnet represents an IP address block that can be used to assign IP addresses
  // to virtual instances. Each subnet must have a CIDR and must be associated with a
  // network. IPs can either be selected from the whole subnet CIDR or from allocation
  // pools specified by the user.
  //
  // A subnet can also have a gateway, a list of DNS name servers, and host routes.
  // This information is pushed to instances whose interfaces are associated with the
  // subnet
  // networking/v2/subnets/requests.go
  // Create accepts a CreateOpts struct and creates a new subnet using the values
  // provided. You must remember to provide a valid NetworkID, CIDR and IP Version.
  func Create(c *gophercloud.ServiceClient, opts CreateOptsBuilder) (r CreateResult)
  4、port部分
  // Package ports contains functionality for working with Neutron port resources.
  // A port represents a virtual switch port on a logical network switch. Virtual
  // instances attach theri interfaces into ports. The logical port also defines the MAC
  // address and the IP address(es) to be assigned to the interfaces plugged into them
  // When IP addresses are associated to a port, this is also implies the port is
  // associated with a subnet, as the IP address was taken from the allocation pool for
  // a specific subnet.

运维网声明 1、欢迎大家加入本站运维交流群:群②:261659950 群⑤:202807635 群⑦870801961 群⑧679858003
2、本站所有主题由该帖子作者发表,该帖子作者与运维网享有帖子相关版权
3、所有作品的著作权均归原作者享有,请您和我们一样尊重他人的著作权等合法权益。如果您对作品感到满意,请购买正版
4、禁止制作、复制、发布和传播具有反动、淫秽、色情、暴力、凶杀等内容的信息,一经发现立即删除。若您因此触犯法律,一切后果自负,我们对此不承担任何责任
5、所有资源均系网友上传或者通过网络收集,我们仅提供一个展示、介绍、观摩学习的平台,我们不对其内容的准确性、可靠性、正当性、安全性、合法性等负责,亦不承担任何法律责任
6、所有作品仅供您个人学习、研究或欣赏,不得用于商业或者其他用途,否则,一切后果均由您自己承担,我们对此不承担任何法律责任
7、如涉及侵犯版权等问题,请您及时通知我们,我们将立即采取措施予以解决
8、联系人Email:admin@iyunv.com 网址:www.yunweiku.com

所有资源均系网友上传或者通过网络收集,我们仅提供一个展示、介绍、观摩学习的平台,我们不对其承担任何法律责任,如涉及侵犯版权等问题,请您及时通知我们,我们将立即处理,联系人Email:kefu@iyunv.com,QQ:1061981298 本贴地址:https://www.yunweiku.com/thread-388328-1-1.html 上篇帖子: debugging openstack with pdb 下篇帖子: OpenStack安装部署(二)
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

扫码加入运维网微信交流群X

扫码加入运维网微信交流群

扫描二维码加入运维网微信交流群,最新一手资源尽在官方微信交流群!快快加入我们吧...

扫描微信二维码查看详情

客服E-mail:kefu@iyunv.com 客服QQ:1061981298


QQ群⑦:运维网交流群⑦ QQ群⑧:运维网交流群⑧ k8s群:运维网kubernetes交流群


提醒:禁止发布任何违反国家法律、法规的言论与图片等内容;本站内容均来自个人观点与网络等信息,非本站认同之观点.


本站大部分资源是网友从网上搜集分享而来,其版权均归原作者及其网站所有,我们尊重他人的合法权益,如有内容侵犯您的合法权益,请及时与我们联系进行核实删除!



合作伙伴: 青云cloud

快速回复 返回顶部 返回列表