#以下是配置的部分内容:
Ethernet1/0/1 current state : DOWN
IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 000f-e221-e7c
Description: sxshifan
Media type is twisted pair, loopback not set
Port hardware type is 100_BASE_TX
100Mbps-speed mode, full-duplex mode
Link speed type is force link, link duplex type is force link
Flow-control is enabled
The Maximum Frame Length is 1532
Broadcast MAX-ratio: 90%
PVID: 1
Mdi type: normal
Port link-type: trunk
VLAN passing : 1(default vlan), 3
VLAN permitted: 1(default vlan), 3
Trunk port encapsulation: IEEE 802.1q
Last 300 seconds input: 0 packets/sec 0 bytes/sec
Last 300 seconds output: 0 packets/sec 0 bytes/sec
Input(total): 0 packets, 0 bytes
0 broadcasts, 0 multicasts, 0 pauses
Input(normal): 0 packets, 0 bytes
0 broadcasts, 0 multicasts, 0 pauses
Input: 0 input errors, 0 runts, 0 giants, - throttles, 0 CRC
0 frame, - overruns, 0 aborts, - ignored, - parity errors
---- More ----http://imgcache.qq.com/ac/b.gif