docker offical docs:Working with Docker Images

xuyangus

Working with Docker Images
　　##orignal is always the best
　　In the introduction we've discovered that Docker images are the basis of containers. In the previoussections we've used Docker images that already exist, for example the ubuntu image and thetraining/webapp image.
　　We've also discovered that Docker stores downloaded images on the Docker host. If an image isn't already present on the host then it'll be downloaded from a registry: by default the Docker Hub public registry.
　　In this section we're going to explore Docker images a bit more including:

• Managing and working with images locally on your Docker host;
  
• Creating basic images;
  
• Uploading images to Docker Hub.
  

Listing images on the host
　　Let's start with listing the images we have locally on our host. You can do this using the docker imagescommand like so:

$ sudo docker images
REPOSITORY       TAG      IMAGE ID      CREATED      VIRTUAL SIZE
training/webapp  latest   fc77f57ad303  3 weeks ago  280.5 MB
ubuntu           13.10    5e019ab7bf6d  4 weeks ago  180 MB
ubuntu           saucy    5e019ab7bf6d  4 weeks ago  180 MB
ubuntu           12.04    74fe38d11401  4 weeks ago  209.6 MB
ubuntu           precise  74fe38d11401  4 weeks ago  209.6 MB
ubuntu           12.10    a7cf8ae4e998  4 weeks ago  171.3 MB
ubuntu           quantal  a7cf8ae4e998  4 weeks ago  171.3 MB
ubuntu           14.04    99ec81b80c55  4 weeks ago  266 MB
ubuntu           latest   99ec81b80c55  4 weeks ago  266 MB
ubuntu           trusty   99ec81b80c55  4 weeks ago  266 MB
ubuntu           13.04    316b678ddf48  4 weeks ago  169.4 MB
ubuntu           raring   316b678ddf48  4 weeks ago  169.4 MB
ubuntu           10.04    3db9c44f4520  4 weeks ago  183 MB
ubuntu           lucid    3db9c44f4520  4 weeks ago  183 MB
　　We can see the images we've previously used in our user guide. Each has been downloaded from Docker Hub when we launched a container using that image.
　　We can see three crucial pieces of information about our images in the listing.

• What repository they came from, for example ubuntu.
  
• The tags for each image, for example 14.04.
  
• The image ID of each image.
  

　　A repository potentially holds multiple variants of an image. In the case of our ubuntu image we can see multiple variants covering Ubuntu 10.04, 12.04, 12.10, 13.04, 13.10 and 14.04. Each variant is identified by a tag and you can refer to a tagged image like so:

ubuntu:14.04
　　So when we run a container we refer to a tagged image like so:

$ sudo docker run -t -i ubuntu:14.04 /bin/bash
　　If instead we wanted to build an Ubuntu 12.04 image we'd use:

$ sudo docker run -t -i ubuntu:12.04 /bin/bash
　　If you don't specify a variant, for example you just use ubuntu, then Docker will default to using theubuntu:latest image.

　　Tip: We recommend you always use a specific tagged image, for example ubuntu:12.04. That way you always know exactly what variant of an image is being used.

Getting a new image
　　So how do we get new images? Well Docker will automatically download any image we use that isn't already present on the Docker host. But this can potentially add some time to the launch of a container. If we want to pre-load an image we can download it using the docker pull command. Let's say we'd like to download the centos image.

$ sudo docker pull centos
Pulling repository centos
b7de3133ff98: Pulling dependent layers
5cc9e91966f7: Pulling fs layer
511136ea3c5a: Download complete
ef52fb1fe610: Download complete
. . .
Status: Downloaded newer image for centos
　　We can see that each layer of the image has been pulled down and now we can run a container from this image and we won't have to wait to download the image.

$ sudo docker run -t -i centos /bin/bash
bash-4.1#
Finding images
　　One of the features of Docker is that a lot of people have created Docker images for a variety of purposes. Many of these have been uploaded to Docker Hub. We can search these images on the Docker Hubwebsite.

　　We can also search for images on the command line using the docker search command. Let's say our team wants an image with Ruby and Sinatra installed on which to do our web application development. We can search for a suitable image by using the docker search command to find all the images that contain the term sinatra.

$ sudo docker search sinatra
NAME                                   DESCRIPTION                                     STARS     OFFICIAL   AUTOMATED
training/sinatra                       Sinatra training image                          0                    [OK]
marceldegraaf/sinatra                  Sinatra test app                                0
mattwarren/docker-sinatra-demo                                                         0                    [OK]
luisbebop/docker-sinatra-hello-world                                                   0                    [OK]
bmorearty/handson-sinatra              handson-ruby + Sinatra for Hands on with D...   0
subwiz/sinatra                                                                         0
bmorearty/sinatra                                                                      0
. . .
　　We can see we've returned a lot of images that use the term sinatra. We've returned a list of image names, descriptions, Stars (which measure the social popularity of images - if a user likes an image then they can "star" it), and the Official and Automated build statuses. Official repositories are built and maintained by the Stackbrew project, and Automated repositories are Automated Builds that allow you to validate the source and content of an image.
　　We've reviewed the images available to use and we decided to use the training/sinatra image. So far we've seen two types of images repositories, images like ubuntu, which are called base or root images. These base images are provided by Docker Inc and are built, validated and supported. These can be identified by their single word names.
　　We've also seen user images, for example the training/sinatra image we've chosen. A user image belongs to a member of the Docker community and is built and maintained by them. You can identify user images as they are always prefixed with the user name, here training, of the user that created them.

Pulling our image
　　We've identified a suitable image, training/sinatra, and now we can download it using the docker pullcommand.

$ sudo docker pull training/sinatra
　　The team can now use this image by run their own containers.

$ sudo docker run -t -i training/sinatra /bin/bash
root@a8cb6ce02d85:/#
Creating our own images
　　The team has found the training/sinatra image pretty useful but it's not quite what they need and we need to make some changes to it. There are two ways we can update and create images.

• We can update a container created from an image and commit the results to an image.
  
• We can use a Dockerfile to specify instructions to create an image.
  

　　To learn more, check out the Dockerfile tutorial.

Updating and committing an image
　　To update an image we first need to create a container from the image we'd like to update.

$ sudo docker run -t -i training/sinatra /bin/bash
root@0b2616b0e5a8:/#

　　Note: Take note of the container ID that has been created, 0b2616b0e5a8, as we'll need it in a moment.

　　Inside our running container let's add the json gem.

root@0b2616b0e5a8:/# gem install json
　　Once this has completed let's exit our container using the exit command.
　　Now we have a container with the change we want to make. We can then commit a copy of this container to an image using the docker commit command.

$ sudo docker commit -m="Added json gem" -a="Kate Smith" \
0b2616b0e5a8 ouruser/sinatra:v2
4f177bd27a9ff0f6dc2a830403925b5360bfe0b93d476f7fc3231110e7f71b1c
　　Here we've used the docker commit command. We've specified two flags: -m and -a. The -m flag allows us to specify a commit message, much like you would with a commit on a version control system. The -a flag allows us to specify an author for our update.
　　We've also specified the container we want to create this new image from, 0b2616b0e5a8 (the ID we recorded earlier) and we've specified a target for the image:

ouruser/sinatra:v2
　　Let's break this target down. It consists of a new user, ouruser, that we're writing this image to. We've also specified the name of the image, here we're keeping the original image name sinatra. Finally we're specifying a tag for the image: v2.
　　We can then look at our new ouruser/sinatra image using the docker images command.

$ sudo docker images
REPOSITORY          TAG     IMAGE ID       CREATED       VIRTUAL SIZE
training/sinatra    latest  5bc342fa0b91   10 hours ago  446.7 MB
ouruser/sinatra     v2      3c59e02ddd1a   10 hours ago  446.7 MB
ouruser/sinatra     latest  5db5f8471261   10 hours ago  446.7 MB
　　To use our new image to create a container we can then:

$ sudo docker run -t -i ouruser/sinatra:v2 /bin/bash
root@78e82f680994:/#
Building an image from a Dockerfile
　　Using the docker commit command is a pretty simple way of extending an image but it's a bit cumbersome and it's not easy to share a development process for images amongst a team. Instead we can use a new command, docker build, to build new images from scratch.
　　To do this we create a Dockerfile that contains a set of instructions that tell Docker how to build our image.
　　Let's create a directory and a Dockerfile first.

$ mkdir sinatra
$ cd sinatra
$ touch Dockerfile
　　Each instruction creates a new layer of the image. Let's look at a simple example now for building our own Sinatra image for our development team.

# This is a comment
FROM ubuntu:14.04
MAINTAINER Kate Smith
RUN apt-get update && apt-get install -y ruby ruby-dev
RUN gem install sinatra
　　Let's look at what our Dockerfile does. Each instruction prefixes a statement and is capitalized.

INSTRUCTION statement

　　Note: We use # to indicate a comment

　　The first instruction FROM tells Docker what the source of our image is, in this case we're basing our new image on an Ubuntu 14.04 image.
　　Next we use the MAINTAINER instruction to specify who maintains our new image.
　　Lastly, we've specified three RUN instructions. A RUN instruction executes a command inside the image, for example installing a package. Here we're updating our APT cache, installing Ruby and RubyGems and then installing the Sinatra gem.

　　Note: There are a lot more instructions available to us in a Dockerfile.

　　Now let's take our Dockerfile and use the docker build command to build an image.

$ sudo docker build -t="ouruser/sinatra:v2" .
Sending build context to Docker daemon 2.048 kB
Sending build context to Docker daemon
Step 0 : FROM ubuntu:14.04
---> e54ca5efa2e9
Step 1 : MAINTAINER Kate Smith
---> Using cache
---> 851baf55332b
Step 2 : RUN apt-get update && apt-get install -y ruby ruby-dev
---> Running in 3a2558904e9b
Selecting previously unselected package libasan0:amd64.
(Reading database ... 11518 files and directories currently installed.)
Preparing to unpack .../libasan0_4.8.2-19ubuntu1_amd64.deb ...
Unpacking libasan0:amd64 (4.8.2-19ubuntu1) ...
Selecting previously unselected package libatomic1:amd64.
Preparing to unpack .../libatomic1_4.8.2-19ubuntu1_amd64.deb ...
Unpacking libatomic1:amd64 (4.8.2-19ubuntu1) ...
Selecting previously unselected package libgmp10:amd64.
Preparing to unpack .../libgmp10_2%3a5.1.3+dfsg-1ubuntu1_amd64.deb ...
Unpacking libgmp10:amd64 (2:5.1.3+dfsg-1ubuntu1) ...
Selecting previously unselected package libisl10:amd64.
Preparing to unpack .../libisl10_0.12.2-1_amd64.deb ...
Unpacking libisl10:amd64 (0.12.2-1) ...
Selecting previously unselected package libcloog-isl4:amd64.
Preparing to unpack .../libcloog-isl4_0.18.2-1_amd64.deb ...
Unpacking libcloog-isl4:amd64 (0.18.2-1) ...
Selecting previously unselected package libgomp1:amd64.
Preparing to unpack .../libgomp1_4.8.2-19ubuntu1_amd64.deb ...
Unpacking libgomp1:amd64 (4.8.2-19ubuntu1) ...
Selecting previously unselected package libitm1:amd64.
Preparing to unpack .../libitm1_4.8.2-19ubuntu1_amd64.deb ...
Unpacking libitm1:amd64 (4.8.2-19ubuntu1) ...
Selecting previously unselected package libmpfr4:amd64.
Preparing to unpack .../libmpfr4_3.1.2-1_amd64.deb ...
Unpacking libmpfr4:amd64 (3.1.2-1) ...
Selecting previously unselected package libquadmath0:amd64.
Preparing to unpack .../libquadmath0_4.8.2-19ubuntu1_amd64.deb ...
Unpacking libquadmath0:amd64 (4.8.2-19ubuntu1) ...
Selecting previously unselected package libtsan0:amd64.
Preparing to unpack .../libtsan0_4.8.2-19ubuntu1_amd64.deb ...
Unpacking libtsan0:amd64 (4.8.2-19ubuntu1) ...
Selecting previously unselected package libyaml-0-2:amd64.
Preparing to unpack .../libyaml-0-2_0.1.4-3ubuntu3_amd64.deb ...
Unpacking libyaml-0-2:amd64 (0.1.4-3ubuntu3) ...
Selecting previously unselected package libmpc3:amd64.
Preparing to unpack .../libmpc3_1.0.1-1ubuntu1_amd64.deb ...Unpacking libmpc3:amd64 (1.0.1-1ubuntu1)...Selecting previously unselected package openssl.Preparing to unpack .../openssl_1.0.1f-1ubuntu2.4_amd64.deb ...Unpacking openssl (1.0.1f-1ubuntu2.4)...Selecting previously unselected package ca-certificates.Preparing to unpack .../ca-certificates_20130906ubuntu2_all.deb ...Unpacking ca-certificates (20130906ubuntu2)...Selecting previously unselected package manpages.Preparing to unpack .../manpages_3.54-1ubuntu1_all.deb ...Unpacking manpages (3.54-1ubuntu1)...Selecting previously unselected package binutils.Preparing to unpack .../binutils_2.24-5ubuntu3_amd64.deb ...Unpacking binutils (2.24-5ubuntu3)...Selecting previously unselected package cpp-4.8.Preparing to unpack .../cpp-4.8_4.8.2-19ubuntu1_amd64.deb ...Unpacking cpp-4.8(4.8.2-19ubuntu1)...Selecting previously unselected package cpp.Preparing to unpack .../cpp_4%3a4.8.2-1ubuntu6_amd64.deb ...Unpacking cpp (4:4.8.2-1ubuntu6)...Selecting previously unselected package libgcc-4.8-dev:amd64.Preparing to unpack .../libgcc-4.8-dev_4.8.2-19ubuntu1_amd64.deb ...Unpacking libgcc-4.8-dev:amd64 (4.8.2-19ubuntu1)...Selecting previously unselected package gcc-4.8.Preparing to unpack .../gcc-4.8_4.8.2-19ubuntu1_amd64.deb ...Unpacking gcc-4.8(4.8.2-19ubuntu1)...Selecting previously unselected package gcc.Preparing to unpack .../gcc_4%3a4.8.2-1ubuntu6_amd64.deb ...Unpacking gcc (4:4.8.2-1ubuntu6)...Selecting previously unselected package libc-dev-bin.Preparing to unpack .../libc-dev-bin_2.19-0ubuntu6_amd64.deb ...Unpacking libc-dev-bin (2.19-0ubuntu6)...Selecting previously unselected package linux-libc-dev:amd64.Preparing to unpack .../linux-libc-dev_3.13.0-30.55_amd64.deb ...Unpacking linux-libc-dev:amd64 (3.13.0-30.55)...Selecting previously unselected package libc6-dev:amd64.Preparing to unpack .../libc6-dev_2.19-0ubuntu6_amd64.deb ...Unpacking libc6-dev:amd64 (2.19-0ubuntu6)...Selecting previously unselected package ruby.Preparing to unpack .../ruby_1%3a1.9.3.4_all.deb ...Unpacking ruby (1:1.9.3.4)...Selecting previously unselected package ruby1.9.1.Preparing to unpack .../ruby1.9.1_1.9.3.484-2ubuntu1_amd64.deb ...Unpacking ruby1.9.1(1.9.3.484-2ubuntu1)...Selecting previously unselected package libruby1.9.1.Preparing to unpack .../libruby1.9.1_1.9.3.484-2ubuntu1_amd64.deb ...Unpacking libruby1.9.1(1.9.3.484-2ubuntu1)...Selecting previously unselected package manpages-dev.Preparing to unpack .../manpages-dev_3.54-1ubuntu1_all.deb ...Unpacking manpages-dev (3.54-1ubuntu1)...Selecting previously unselected package ruby1.9.1-dev.Preparing to unpack .../ruby1.9.1-dev_1.9.3.484-2ubuntu1_amd64.deb ...Unpacking ruby1.9.1-dev (1.9.3.484-2ubuntu1)...Selecting previously unselected package ruby-dev.Preparing to unpack .../ruby-dev_1%3a1.9.3.4_all.deb ...Unpacking ruby-dev (1:1.9.3.4)...Setting up libasan0:amd64 (4.8.2-19ubuntu1)...Setting up libatomic1:amd64 (4.8.2-19ubuntu1)...Setting up libgmp10:amd64 (2:5.1.3+dfsg-1ubuntu1)...Setting up libisl10:amd64 (0.12.2-1)...Setting up libcloog-isl4:amd64 (0.18.2-1)...Setting up libgomp1:amd64 (4.8.2-19ubuntu1)...Setting up libitm1:amd64 (4.8.2-19ubuntu1)...Setting up libmpfr4:amd64 (3.1.2-1)...Setting up libquadmath0:amd64 (4.8.2-19ubuntu1)...Setting up libtsan0:amd64 (4.8.2-19ubuntu1)...Setting up libyaml-0-2:amd64 (0.1.4-3ubuntu3)...Setting up libmpc3:amd64 (1.0.1-1ubuntu1)...Setting up openssl (1.0.1f-1ubuntu2.4)...Setting up ca-certificates (20130906ubuntu2)...
debconf: unable to initialize frontend:Dialog
debconf:(TERM isnotset, so the dialog frontend isnot usable.)
debconf: falling back to frontend:Readline
debconf: unable to initialize frontend:Readline
debconf:(This frontend requires a controlling tty.)
debconf: falling back to frontend:TeletypeSetting up manpages (3.54-1ubuntu1)...Setting up binutils (2.24-5ubuntu3)...Setting up cpp-4.8(4.8.2-19ubuntu1)...Setting up cpp (4:4.8.2-1ubuntu6)...Setting up libgcc-4.8-dev:amd64 (4.8.2-19ubuntu1)...Setting up gcc-4.8(4.8.2-19ubuntu1)...Setting up gcc (4:4.8.2-1ubuntu6)...Setting up libc-dev-bin (2.19-0ubuntu6)...Setting up linux-libc-dev:amd64 (3.13.0-30.55)...Setting up libc6-dev:amd64 (2.19-0ubuntu6)...Setting up manpages-dev (3.54-1ubuntu1)...Setting up libruby1.9.1(1.9.3.484-2ubuntu1)...Setting up ruby1.9.1-dev (1.9.3.484-2ubuntu1)...Setting up ruby-dev (1:1.9.3.4)...Setting up ruby (1:1.9.3.4)...Setting up ruby1.9.1(1.9.3.484-2ubuntu1)...Processing triggers for libc-bin (2.19-0ubuntu6)...Processing triggers for ca-certificates (20130906ubuntu2)...Updating certificates in/etc/ssl/certs...164 added,0 removed;done.Running hooks in/etc/ca-certificates/update.d....done.---> c55c31703134
Removing intermediate container 3a2558904e9bStep3: RUN gem install sinatra
--->Runningin6b81cb6313e5
unable to convert "\xC3" to UTF-8in conversion from ASCII-8BIT to UTF-8 to US-ASCII for README.rdoc, skipping
unable to convert "\xC3" to UTF-8in conversion from ASCII-8BIT to UTF-8 to US-ASCII for README.rdoc, skipping
Successfully installed rack-1.5.2Successfully installed tilt-1.4.1Successfully installed rack-protection-1.5.3Successfully installed sinatra-1.4.54 gems installed
Installing ri documentation for rack-1.5.2...Installing ri documentation for tilt-1.4.1...Installing ri documentation for rack-protection-1.5.3...Installing ri documentation for sinatra-1.4.5...InstallingRDoc documentation for rack-1.5.2...InstallingRDoc documentation for tilt-1.4.1...InstallingRDoc documentation for rack-protection-1.5.3...InstallingRDoc documentation for sinatra-1.4.5...--->97feabe5d2edRemoving intermediate container 6b81cb6313e5Successfully built 97feabe5d2ed
　　We've specified our docker build command and used the -t flag to identify our new image as belonging to the user ouruser, the repository name sinatra and given it the tag v2.
　　We've also specified the location of our Dockerfile using the . to indicate a Dockerfile in the current directory.

　　Note: You can also specify a path to a Dockerfile.

　　Now we can see the build process at work. The first thing Docker does is upload the build context: basically the contents of the directory you're building in. This is done because the Docker daemon does the actual build of the image and it needs the local context to do it.
　　Next we can see each instruction in the Dockerfile being executed step-by-step. We can see that each step creates a new container, runs the instruction inside that container and then commits that change - just like the docker commit work flow we saw earlier. When all the instructions have executed we're left with the 324104cde6ad image (also helpfully tagged as ouruser/sinatra:v2) and all intermediate containers will get removed to clean things up.

　　Note: An image can't have more than 127 layers regardless of the storage driver. This limitation is set globally to encourage optimization of the overall size of images.

　　We can then create a container from our new image.

$ sudo docker run -t -i ouruser/sinatra:v2 /bin/bash
root@8196968dac35:/#

　　Note: This is just a brief introduction to creating images. We've skipped a whole bunch of other instructions that you can use. We'll see more of those instructions in later sections of the Guide or you can refer to the Dockerfile reference for a detailed description and examples of every instruction. To help you write a clear, readable, maintainable Dockerfile, we've also written a Dockerfile Best Practices guide.

More
　　To learn more, check out the Dockerfile tutorial.

Setting tags on an image
　　You can also add a tag to an existing image after you commit or build it. We can do this using the docker tag command. Let's add a new tag to our ouruser/sinatra image.

$ sudo docker tag 5db5f8471261 ouruser/sinatra:devel
　　The docker tag command takes the ID of the image, here 5db5f8471261, and our user name, the repository name and the new tag.
　　Let's see our new tag using the docker images command.

$ sudo docker images ouruser/sinatra
REPOSITORY          TAG     IMAGE ID      CREATED        VIRTUAL SIZE
ouruser/sinatra     latest  5db5f8471261  11 hours ago   446.7 MB
ouruser/sinatra     devel   5db5f8471261  11 hours ago   446.7 MB
ouruser/sinatra     v2      5db5f8471261  11 hours ago   446.7 MB
Push an image to Docker Hub
　　Once you've built or created a new image you can push it to Docker Hub using the docker pushcommand. This allows you to share it with others, either publicly, or push it into a private repository.

$ sudo docker push ouruser/sinatra
The push refers to a repository [ouruser/sinatra] (len: 1)
Sending image list
Pushing repository ouruser/sinatra (3 tags)
. . .
Remove an image from the host
　　You can also remove images on your Docker host in a way similar to containers using the docker rmicommand.
　　Let's delete the training/sinatra image as we don't need it anymore.

$ sudo docker rmi training/sinatra
Untagged: training/sinatra:latest
Deleted: 5bc342fa0b91cabf65246837015197eecfa24b2213ed6a51a8974ae250fedd8d
Deleted: ed0fffdcdae5eb2c3a55549857a8be7fc8bc4241fb19ad714364cbfd7a56b22f
Deleted: 5c58979d73ae448df5af1d8142436d81116187a7633082650549c52c3a2418f0

　　Note: In order to remove an image from the host, please make sure that there are no containers actively based on it.