Centos6.5 或6.x 5.x搭建smokeping

64532

1.准备工作

  关掉防火墙和SELINUX

2.安装rpmforge

# yum install wget

  (****CentOS 6请使用这个库****)

wget http://pkgs.repoforge.org/rpmfor ... 2.el6.rf.x86_64.rpm

rpm -Uvh rpmforge-release-0.5.2-2.el6.rf.x86_64.rpm

(****CentOS 5请使用这个库****)

wget http://pkgs.repoforge.org/rpmfor ... 2.el5.rf.x86_64.rpm

rpm -Uvh rpmforge-release-0.5.2-2.el5.rf.x86_64.rpm

3.安装需要的软件包

# yum install mod_fcgid httpd httpd-devel rrdtool fping wget curl bind-utils gcc make

# yum install perl perl-Net-Telnet perl-Net-DNS perl-LDAP perl-libwww-perl perl-RadiusPerl perl-IO-Socket-SSL perl-Socket6 perl-CGI-SpeedyCGI perl-FCGI perl-RRD-Simple perl-CGI-SpeedCGI perl-ExtUtils-MakeMaker

4.安装smokeping

# wget http://oss.oetiker.ch/smokeping/pub/smokeping-2.6.8.tar.gz

# tar -zxvf smokeping-2.6.8.tar.gz -C /opt/
# mkdir /opt/smokeping
# cd /opt/smokeping-2.6.8/setup
# ./build-perl-modules.sh
# cp -r ../thirdparty /opt/smokeping/
# cd ..
# ./configure –prefix=/opt/smokeping

# make install

5.创建丢失的文件夹

# cd /opt/smokeping
# mkdir data var cache

6.添加smokeping启动/停止脚本

# wget http://new.wedebugyou.com/static/smokeping_start_stop.txt
# mv smokeping_start_stop.txt /etc/init.d/smokeping
# chmod 755 /etc/init.d/smokeping

7.重命名配置文件和更改安全

# cd /opt/smokeping/etc/
# for foo in *.dist; do cp $foo `basename $foo .dist`; done
# chmod 600 /opt/smokeping/etc/smokeping_secrets.dist

8.更改默认配置文件

# vim config

(“*”号范围离得为配置文件样例)

************************************************************************

*** General ***

owner    = Nolan Guo
contact  = guoyingce@originpoker.com
# mailhost = my.mail.host
# sendmail = /usr/sbin/sendmail
# NOTE: do not put the Image Cache below cgi-bin
# since all files under cgi-bin will be executed ... this is not
# good for images.
imgcache = /opt/smokeping/cache
imgurl   = cache
datadir  = /opt/smokeping/data
piddir  = /opt/smokeping/var
cgiurl   = http://*****/smokeping.cgi
smokemail = /opt/smokeping/etc/smokemail.dist
tmail = /opt/smokeping/etc/tmail.dist
# specify this to get syslog logging
syslogfacility = local0
# each probe is now run in its own process
# disable this to revert to the old behaviour
# concurrentprobes = no

*** Alerts ***
to = alertee@address.somewhere
from = smokealert@company.xy

+someloss
type = loss
# in percent
pattern = >0%,*12*,>0%,*12*,>0%
comment = loss 3 times  in a row

*** Database ***

step     = 300
pings    = 20

# consfn mrhb steps total

AVERAGE  0.5   1  1008
AVERAGE  0.5  12  4320
    MIN  0.5  12  4320
    MAX  0.5  12  4320
AVERAGE  0.5 144   720
    MAX  0.5 144   720
    MIN  0.5 144   720

*** Presentation ***

template = /opt/smokeping/etc/basepage.html.dist
+ charts

menu = Charts
title = The most interesting destinations

++ stddev
sorter = StdDev(entries=>4)
title = Top Standard Deviation
menu = Std Deviation
format = Standard Deviation %f

++ max
sorter = Max(entries=>5)
title = Top Max Roundtrip Time
menu = by Max
format = Max Roundtrip Time %f seconds

++ loss
sorter = Loss(entries=>5)
title = Top Packet Loss
menu = Loss
format = Packets Lost %f

++ median
sorter = Median(entries=>5)
title = Top Median Roundtrip Time
menu = by Median
format = Median RTT %f seconds

+ overview

width = 600
height = 50
range = 10h

+ detail

width = 600
height = 200
unison_tolerance = 2

"Last 3 Hours"    3h
"Last 30 Hours"   30h
"Last 10 Days"    10d
"Last 400 Days"   400d

#+ hierarchies
#++ owner
#title = Host Owner
#++ owner
#title = Host Owner
#++ location
#title = Location

*** Probes ***

+ FPing

binary = /usr/sbin/fping

+ Curl
binary = /usr/bin/curl
urlformat = https://%host%/
pings = 3

*** Targets ***

probe = FPing

menu = Top
title = Network Latency Grapher
remark = Welcome to the SmokePing website of Originpoker Company. \
         Here you will learn all about the latency of our network.

************************************************************************

9.smokeping到Web服务器的配置

# cd /opt/smokeping
# ln -s /opt/smokeping/cache /opt/smokeping/htdocs/cache
# chown -R apache cache
# chown -R apache data

（添加这些行为的文件/ etc /服务器/ conf.d/smokeping.conf）

ScriptAlias/smokeping/smokeping.cgi /opt/smokeping/htdocs/smokeping.fcgi.dist

Alias /smokeping /opt/smokeping/htdocs

<Directory “/opt/smokeping/htdocs”>
Options FollowSymLinks
</Directory>

10.启动服务

# /etc/init.d/smokeping start
# /etc/init.d/httpd start

wangzm

点赞