|
一、背景说明
近日在centos主机上挂载一块硬盘,使用mount后提示mount: unknown filesystem type 'ntfs'可知此块硬盘是ntfs格式的,那么只能通过mount -t选项来指定硬盘类型为nfs。
二、挂载方法
1.使用fdisk命令查看硬盘名称
# fdisk -l
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x9467bbdf
Device Boot Start End Blocks Id System
/dev/sda1 * 1 26 204800 83 Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2 26 12774 102400000 83 Linux
/dev/sda3 12774 60802 385780736 82 Linux swap / Solaris
Disk /dev/sdb: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x66666666
Device Boot Start End Blocks Id System
/dev/sdb1 1 30401 244196001 7 HPFS/NTFS
可见我们需要挂载的硬盘是/dev/sdb1
2.安装ntfs支持
至http://www.tuxera.com/community/ntfs-3g-download/网站下载最新的ntfs-3g源码包。
安装ntfs-3g
# tar -zxvf ntfs-3g_ntfsprogs-2013.1.13.gz
# cd ntfs-3g_ntfsprogs-2013.1.13
# ./configure
# make
# make install
3.挂载ntfs硬盘
# mkdir /windows
# mount -t ntf3-3g /dev/sdb1 /windows
至此、完成。 |
|
|