cloudstack二级存储部署（四）

lukyjre

下边是二级存储服务器部署配置二级存储1：安装服务包[iyunv@secondary sysconfig]# yum -y install rpcbind nfs-utils
2：创建共享目录[iyunv@secondary sysconfig]# mkdir /secondary
3：创建配置文件[iyunv@secondary sysconfig]# vim /etc/exports
/secondary 192.168.1.0/24(rw,no_root_squash)
4：确定端口是否被占用[iyunv@secondary sysconfig]# netstat -anptu | grep 1012
[iyunv@secondary sysconfig]# netstat -anptu | grep 1013
5：将nfs端口固定mountd          1012/tcp                # rpc.mountd
mountd          1012/udp                # rpc.mountd
rquotad         1013/tcp                # rpc.rquotad
rquotad         1013/udp                # rpc.rquotad
6：配置防火墙[iyunv@secondary sysconfig]# vim /etc/sysconfig/iptables
-A INPUT -s 192.168.1.0/24 -p tcp -m multiport --dports 111,2049,1012,1013,32768 -j ACCEPT
-A INPUT -s 192.168.1.0/24 -p udp -m multiport --dports 111,2019,1012,1013,32768 -j ACCEPT
[iyunv@secondary sysconfig]# service iptables restart
7：启动nfs相关服务[iyunv@secondary sysconfig]# service rpcbind restart
[iyunv@secondary sysconfig]# service nfs start
8：将服务设为开机自启[iyunv@secondary sysconfig]# chkconfig rpcbind on
[iyunv@secondary sysconfig]# chkconfig nfs on
下边是把kvm模板导入二级存储3.二级存储3.1使用二级存储1）创建挂载点

[iyunv@cloudstack cloudstack]# mkdir /secondary

2）挂载二级存储

[iyunv@cloudstack ~]# mount -t nfs 192.168.1.131:/secondary /secondary/

3.2导入kvm模板1）上传kvm模板并改名这个模板是下载下来用的，要不然也得很长时间
http://download.cloud.com/templa ... -02062012.qcow2.bz2

[iyunv@cloudstack ~]# pwd

/root

[iyunv@cloudstack ~]# ls

acton-systemvm-02062012.qcow2.bz2  anaconda-ks.cfg  install.log  install.log.syslog

[iyunv@cloudstack ~]# mv acton-systemvm-02062012.qcow2.bz2 kvm.bz2

2）导入系统kvm模板

[iyunv@cloudstack~]# /usr/share/cloudstack-common/scripts/storage/secondary/cloud-install-sys-tmplt -m /secondary/ -f /root/kvm.bz2 -h kvm -F

Uncompressing to /usr/share/cloudstack-common/scripts/storage/secondary/df08b26b-08a0-401f-809d-0b38908bc630.qcow2.tmp (type bz2)...could take a long time

Moving to /secondary/template/tmpl/1/3///df08b26b-08a0-401f-809d-0b38908bc630.qcow2...could take a while

Successfully installed system VM template /root/kvm.bz2 to /secondary/template/tmpl/1/3/

3）管理节点卸载二级存储并启动cloudstack服务

[iyunv@cloudstack ~]# umount /secondary/;rm -rf /secondary/

4）启动cloudstack服务

[iyunv@cloudstack ~]# cloudstack-setup-management

Starting to configure CloudStack Management Server:

Configure Firewall ...        [OK]

Configure CloudStack Management Server ...[OK]

CloudStack Management Server setup is Done!