写了长长长一篇文章,结果把标签关了,这篇文章就不见了,草稿箱也没有!!!
只好直接copy原来作者的文章了
下载地址
openwrt image
tulip driver
引用
Want to add a openwrt machine in hyper-v for testing? Sadly, the openwrt did not include the hyper-v device driver for the network device.
(Un)luckily there is a legacy network driver in hyper-v that can be used in openwrt.
Steps to add openwrt machine inside hyper-v:
In hyper-v, add a machine with 64-128MB ram, legacy network device.
Copy the openwrt image to the virtual hard disk.
Mount the virtual hard disk (mount /dev/sda2 /mnt) and copy the tulip driver to the hard disk.
Boot the openwrt machine.
Inside the openwrt machine, add the tulip driver (cd /; opkg install kmod-tulip_3.3.8-1_x86.ipk)
ifconfig -a to check the name of the network device.
Modify /etc/config/network as usual and restart the network (or reboot).