设为首页 收藏本站
查看: 2168|回复: 0

[经验分享] Juniper路由器接口命名规则

[复制链接]

尚未签到

发表于 2018-7-28 08:55:34 | 显示全部楼层 |阅读模式

  首先接口分为2类
  Permanent Interfaces,fxp0用于管理,类似Cisco loopback接口和fxp1用于内部链接RE和PFE
  Transient Interfaces.除fxp0/1之外的都是Transient Interfaces,
  Interface Naming Structure of Transient Interfaces
  media_type-fpc/pic/port.unit
  1.media_type

  A two-character designator that uniquely>  cisco没有的东西,指的是用2个字母来描述接口的类型,如:
  ae
  Aggregated Ethernet interface
  as
  Aggregated SONET/SDH interface
  at
  Asynchronous Transfer Mode (ATM) interface
  ds
  DS0 interface (including Multichannelized DS-3 interfaces)
  e1
  E1 interface (including Channelized STM-1 to E1 interfaces)
  e3
  E3 interface
  es
  Encryption interface
  fe
  Fast Ethernet interface
  fxp
  Management and Internal Ethernet interfaces
  ge
  Gigabit Ethernet interface
  gr
  Generic Route Encapsulation tunnel interface
  ip
  IP-over-IP encapsulation tunnel interface
  lo
  Loopback interface
  so
  SONET/SDH interface
  t1
  T1 interface (including Channelized DS-3)
  t3
  T3 interface (including Channelized OC-12 interfaces)
  2.fpc –类似思科的sip母板
  The physical slot in the chassis where the interface is located

  3.pic-类似思科的spa子卡
  The slot on the FPC that contains the interface

  4.port 这个没问题了,就是spa上的接口.
  The location on the PIC where the interface port is located

  5.Unit子接口.
  The logical portion of the interface that contains properties, such as an IP address
  Let’s examine each of these interface portions in more detail.
  Suppose a router has two OC-3 PICs in slots 0 and 1 on an FPC
  in slot 1. Each of the PICs contains two ports. The names of these interfaces are:
  so-1/0/0.0
  so-1/0/1.0
  so-1/1/0.0
  so-1/1/1.0
  When an FPC in slot 3 contains four OC-12 ATM PICs, the FPC becomes fully populated.
  Each PIC supports a single physical port. The interface names when each port has a single log-
  ical unit assigned are:
  [1] at-3/0/0.0
  [1] at-3/1/0.0
  [1] at-3/2/0.0
  [1] at-3/3/0.0
  The OC-48 SONET FPC in an M40 router is an example of a quad-wide PIC. Should this
  PIC be installed in slot 6, it appears as PIC slot 0 with a single port 0. The JUNOS software rep-
  resentation becomes:
  so-6/0/0.0
  A channelized OC-12 PIC contains 12 logical DS-3 channels. When installed in PIC slot 2 on
  FPC slot 2, the channels are represented as:
  [1] t3-2/2/0:0
  [1] t3-2/2/0:1
  [1] t3-2/2/0:2
  [1] t3-2/2/0:3
  [1] t3-2/2/0:4
  [1] t3-2/2/0:5
  [1] t3-2/2/0:6
  [1] t3-2/2/0:7
  [1] t3-2/2/0:8
  [1] t3-2/2/0:9
  [1] t3-2/2/0:10
  [1] t3-2/2/0:11

运维网声明 1、欢迎大家加入本站运维交流群:群②:261659950 群⑤:202807635 群⑦870801961 群⑧679858003
2、本站所有主题由该帖子作者发表,该帖子作者与运维网享有帖子相关版权
3、所有作品的著作权均归原作者享有,请您和我们一样尊重他人的著作权等合法权益。如果您对作品感到满意,请购买正版
4、禁止制作、复制、发布和传播具有反动、淫秽、色情、暴力、凶杀等内容的信息,一经发现立即删除。若您因此触犯法律,一切后果自负,我们对此不承担任何责任
5、所有资源均系网友上传或者通过网络收集,我们仅提供一个展示、介绍、观摩学习的平台,我们不对其内容的准确性、可靠性、正当性、安全性、合法性等负责,亦不承担任何法律责任
6、所有作品仅供您个人学习、研究或欣赏,不得用于商业或者其他用途,否则,一切后果均由您自己承担,我们对此不承担任何法律责任
7、如涉及侵犯版权等问题,请您及时通知我们,我们将立即采取措施予以解决
8、联系人Email:admin@iyunv.com 网址:www.yunweiku.com

所有资源均系网友上传或者通过网络收集,我们仅提供一个展示、介绍、观摩学习的平台,我们不对其承担任何法律责任,如涉及侵犯版权等问题,请您及时通知我们,我们将立即处理,联系人Email:kefu@iyunv.com,QQ:1061981298 本贴地址:https://www.yunweiku.com/thread-542308-1-1.html 上篇帖子: 如何查看juniper 硬件版本号,软件版本号,ios-name,serial ;system time ;up time 等 下篇帖子: Juniper发展史
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

扫码加入运维网微信交流群X

扫码加入运维网微信交流群

扫描二维码加入运维网微信交流群,最新一手资源尽在官方微信交流群!快快加入我们吧...

扫描微信二维码查看详情

客服E-mail:kefu@iyunv.com 客服QQ:1061981298


QQ群⑦:运维网交流群⑦ QQ群⑧:运维网交流群⑧ k8s群:运维网kubernetes交流群


提醒:禁止发布任何违反国家法律、法规的言论与图片等内容;本站内容均来自个人观点与网络等信息,非本站认同之观点.


本站大部分资源是网友从网上搜集分享而来,其版权均归原作者及其网站所有,我们尊重他人的合法权益,如有内容侵犯您的合法权益,请及时与我们联系进行核实删除!



合作伙伴: 青云cloud

快速回复 返回顶部 返回列表