Centos gitlab简单搭建备份及恢复

eagleshi

　　1.安装配置必须的依赖
　　yum install curl policycoreutils openssh-server openssh-clients
　　systemctl enable sshd
　　systemctl start sshd
　　yum install postfix
　　systemctl enable postfix
　　systemctl start postfix
　　firewall-cmd --permanent --add-service=http
　　systemctl reload firewalld
　　2.安装gitlab
　　rpm -ivh gitlab-ce-8.11.6-ce.0.el6.x86_64.rpm
　　3.配置并启动gitlab
　　gitlab-ctl reconfigure
　　4.默认账户密码
　　Username: root
　　Password: 5iveL!fe
　　5.备份
　　gitlab-rake gitlab:backup:create
　　默然的备份目录为： /var/opt/gitlab/backups
　　修改备份目录
　　vi /etc/gitlab/gitlab.rb
　　gitlab_rails['backup_path'] = '/mnt/gitlab_backups'
　　6.数据恢复和还原
　　停止服务
　　gitlab-ctl stop unicorn
　　gitlab-ctl stop sidekiq
　　BACKUP后面跟的是备份文件的时间戳，比如恢复备份文件1458217074_gitlab_backup.tar，注：需要恢复的文件必须放在gitlib的备份目录下
　　gitlab-rake gitlab:backup:restore BACKUP=1458213020
　　恢复完成启动服务
　　gitlab-ctl start/restart
　　以上gitlab基本搭建完成 网页直接IP访问 默认端口为80
　　#修改默认端口
　　1.Change port to 81 (You can choose your own) at port: near by production:$base >> gitlab: for file /opt/gitlab/embedded/service/gitlab-rails/config/gitlab.yml
　　2.Change your host address if you like to use different from your ip address or localhost
　　3.Change server port to 81 in file "/opt/gitlab/embedded/conf/nginx.conf"
　　4.Restart gitlab using command "sudo gitlab-ctl restart".
　　5.Open "/etc/gitlab/gitlab.rb" to text editor where currently I have external_url 'http://myipaddress/' as text. I just change to
　　external_url 'http://gitlab.com.local:81/'
　　then reconfigure using command "sudo gitlab-ctl reconfigure" and voila, Gitlab is now working on port 81.
　　#开机自启动
　　systemctl enable gitlab-runsvdir.service
　　systemctl start gitlab-runsvdir.service
　　gitlab-cmd start