设为首页 收藏本站
查看: 1943|回复: 0

[经验分享] Cisco 交换机EC 捆绑

[复制链接]

尚未签到

发表于 2018-7-18 08:14:29 | 显示全部楼层 |阅读模式
  此示例显示被动-主动模式 LACP 配置:
  Catalyst 3750 交换机堆叠 A
  3750switchstackA(config)#interface gigabitethernet 1/0/43  和 gi2/0/43
  3750switchstackA(config-if-range)#channel-group 4 mode passive
  3750switchstackA(config-if-range)#switchport trunk encapsulation dot1q
  3750switchstackA(config-if-range)#switchport mode trunk
  3750switchstackA(config)#interface gigabitethernet 3/0/3
  3750switchstackA(config-if)#channel-group 4 mode passive
  3750switchstackA(config-if)#switchport trunk encapsulation dot1q
  3750switchstackA(config-if)#switchport mode trunk
  Catalyst 3750 交换机 B
  3750switchstackB(config)#interface range gigabitethernet 1/0/47 -  48
  3750switchst(config-if-range)#channel-group 4 mode active
  3750switchst(config-if-range)#switchport trunk encapsulation dot1q
  3750switchst(config-if-range)#switchport mode trunk
  您可以使用以下方法验证 EtherChannel 状态:
SH_Core_3750X_48#show interfaces port-channel 4  
Port-channel4 is up, line protocol is up ()
  
  Hardware is EtherChannel, address is d8b1.9080.852b (
  
  MTU 1500 bytes,  Kbit, DLY 10 usec,
  
     reliability 255/255, txload 1/255, rxload 1/255
  SH_Core_3750X_48#show etherchannel 4 summary
  Flags:  D - down        P - bundled in port-channel
  I - stand-alone s - suspended
  H - Hot-standby (LACP only)
  R - Layer3      S - Layer2
  U - in use      f - failed to allocate aggregator
  M - not in use, minimum links not met
  u - unsuitable for bundling
  w - waiting to be aggregated
  d - default port
  Number of channel-groups in use: 3
  Number of aggregators:           3
  Group  Port-channel  Protocol    Ports
  ------+-------------+-----------+--------------------------------------
  4      Po4(SU)         LACP      Gi1/0/43(P) Gi2/0/43(P)
  参考文档:
  http://www.cisco.com/cisco/web/support/CN/10/1099/1099133_cross_stack_etherchannel.html

运维网声明 1、欢迎大家加入本站运维交流群:群②:261659950 群⑤:202807635 群⑦870801961 群⑧679858003
2、本站所有主题由该帖子作者发表,该帖子作者与运维网享有帖子相关版权
3、所有作品的著作权均归原作者享有,请您和我们一样尊重他人的著作权等合法权益。如果您对作品感到满意,请购买正版
4、禁止制作、复制、发布和传播具有反动、淫秽、色情、暴力、凶杀等内容的信息,一经发现立即删除。若您因此触犯法律,一切后果自负,我们对此不承担任何责任
5、所有资源均系网友上传或者通过网络收集,我们仅提供一个展示、介绍、观摩学习的平台,我们不对其内容的准确性、可靠性、正当性、安全性、合法性等负责,亦不承担任何法律责任
6、所有作品仅供您个人学习、研究或欣赏,不得用于商业或者其他用途,否则,一切后果均由您自己承担,我们对此不承担任何法律责任
7、如涉及侵犯版权等问题,请您及时通知我们,我们将立即采取措施予以解决
8、联系人Email:admin@iyunv.com 网址:www.yunweiku.com

所有资源均系网友上传或者通过网络收集,我们仅提供一个展示、介绍、观摩学习的平台,我们不对其承担任何法律责任,如涉及侵犯版权等问题,请您及时通知我们,我们将立即处理,联系人Email:kefu@iyunv.com,QQ:1061981298 本贴地址:https://www.yunweiku.com/thread-538217-1-1.html 上篇帖子: cisco交换机基本设置 下篇帖子: cisco pix 635的注册信息
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

扫码加入运维网微信交流群X

扫码加入运维网微信交流群

扫描二维码加入运维网微信交流群,最新一手资源尽在官方微信交流群!快快加入我们吧...

扫描微信二维码查看详情

客服E-mail:kefu@iyunv.com 客服QQ:1061981298


QQ群⑦:运维网交流群⑦ QQ群⑧:运维网交流群⑧ k8s群:运维网kubernetes交流群


提醒:禁止发布任何违反国家法律、法规的言论与图片等内容;本站内容均来自个人观点与网络等信息,非本站认同之观点.


本站大部分资源是网友从网上搜集分享而来,其版权均归原作者及其网站所有,我们尊重他人的合法权益,如有内容侵犯您的合法权益,请及时与我们联系进行核实删除!



合作伙伴: 青云cloud

快速回复 返回顶部 返回列表