思科VTP网络架设实例
本帖最后由 Davis 于 2017-12-5 15:24 编辑VTP(Vlan Trunk Protocols) NETWORK
Goal: PCS communication each other via VTP network. Network map as below: Environment:Cisco Packet Tracer
Workstation
Set static IP for workstaions
PC0: 192.168.1.2 255.255.255.0 192.168.1.1PC1: 192.168.4.2 255.255.255.0 192.168.4.1PC2: 192.168.3.2 255.255.255.0 192.168.3.1PC3: 192.168.2.2 255.255.255.0 192.168.2.1
Connection
VTP SERVER Gig 0/1----->VTP CLIENT1 Fa 0/1VTP SERVER Gig 0/2----->VTP CLIENT2 Fa 0/1VTP CLIENT1 Fa 0/2----->VTP CLIENT4 Fa 0/2VTP CLIENT1 Fa 0/24----->PC0VTP CLIENT2 Fa 0/2----->VTP CLIENT3 Fa 0/2VTP CLIENT2 Fa 0/24----->PC3VTP CLIENT4 Fa 0/24----->PC1VTP CLIENT3 Fa 0/24----->PC2
VTP SERVER
Create vlans
Set ip for vlans
Set the switchport (Connect with next switch) mode to trunk
Set VTP mode to server
Start Route function
VTP Clients
VTP Client 1
Set VTP mode to client
Set the switchport (Connect with next switch) mode to trunk
set the Switchport (connection with workstation) access to vlan2
VTP Client 2
VTP Client 3
VTP Client 4
Set VTP mode to client
Set the switchport (Connect with next switch) mode to trunk
Set the switchport (connection with workstation) access vlan 5
TEST
PCS Ping each other, Result:PASS
更多网络运维访问作者个人网站：http://www.davis-wiki.com
页:
[1]