Cisco2509/2511终端服务器的配置实例
aus-comm-server#show running-config !version 12.0
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
!
hostname aus-comm-server
!
enable secret<deleted>
!
username cisco password <deleted>
!
ip subnet-zero
ip domain-list cisco.com
no ip domain-lookup
ip host 3600-3 2014 172.21.1.1
!--- The host 3600-3 is connected to port 14 of the comm server.
!--- Ensure that the IP address is that of an interface on the comm server.
ip host 3600-2 2013 172.21.1.1
ip host 5200-1 2010 172.21.1.1
ip host 2600-1 2008 172.21.1.1
ip host 2509-1 2007 172.21.1.1
ip host 4500-1 2015 172.21.1.1
ip host 3600-1 2012 172.21.1.1
ip host 2511-2 2002 172.21.1.1
ip host 2511-rj 2003 172.21.1.1
ip host 2511-1 2001 172.21.1.1
ip host 5200-2 2011 172.21.1.1
ip host 2520-1 2004 172.21.1.1
ip host 2520-2 2005 172.21.1.1
ip host 2600-2 2009 172.21.1.1
ip host 2513-1 2006 172.21.1.1
ip host pix-1 2016 172.21.1.1
!
!
process-max-time 200
!
interface Loopback1
ip address 172.21.1.1 255.0.0.0
!--- This address is used in the IP host commands.
!--- Work with loopback interfaces, which are virtual and always available.
no ip directed-broadcast
!
interface Ethernet0
ip address 171.55.31.5 255.255.255.192
!---Use a public IP address to ensure connectivity.
No ip directed-broadcast
no ip mroute-cache
!
interface Serial0
no ip address
no ip directed-broadcast
no ip mroute-cache
shutdown
!
ip default-gateway 171.55.31.1
!--- This is the default gateway when routing is disabled.
!--- For example, if the router is in boot ROM mode.
ip> ip route 0.0.0.0 0.0.0.0 171.55.31.1
!--- Set the default route for the external network.
no ip http server
!
line con 0
transport input all
line 1 16
session-timeout 20
!--- The session times out after 20 minutes of inactivity.
no exec
!--- Unwanted signals from the attached device do not launch.
!--- An EXEC session ensures that the line never becomes unavailable
!--- due to a rogue EXEC process.
exec-timeout 0 0
!--- This disables exec timeout transport input all.
!--- Allow all protocols to use the line.
!--- Configure lines 1 - 16 with at least transport input Telnet.
line aux 0
!--- Auxiliary port can provide dial backup to the network.
!--- Note: This configuration does not implement modem on AUX port modem InOut.
!--- Allow auxiliary port to support dialout and dialin connections.
transport preferred telnet
transport input all
speed 38400
flowcontrol hardware
line vty 0 4
exec-timeout 60 0
password <deleted>
login
!
end
页:
[1]