Cisco2509/2511终端服务器的配置实例

上帝大脸

aus-comm-server#show running-config　　!
　　version 12.0
　　service timestamps debug datetime msec localtime show-timezone
　　service timestamps log datetime msec localtime show-timezone
　　service password-encryption
　　!
　　hostname aus-comm-server
　　!
　　enable secret  <deleted>
　　!
　　username cisco password <deleted>
　　!
　　ip subnet-zero
　　ip domain-list cisco.com
　　no ip domain-lookup
　　ip host 3600-3 2014 172.21.1.1
　　
　　!--- The host 3600-3 is connected to port 14 of the comm server.
　　!--- Ensure that the IP address is that of an interface on the comm server.
　　ip host 3600-2 2013 172.21.1.1
　　ip host 5200-1 2010 172.21.1.1
　　ip host 2600-1 2008 172.21.1.1
　　ip host 2509-1 2007 172.21.1.1
　　ip host 4500-1 2015 172.21.1.1
　　ip host 3600-1 2012 172.21.1.1
　　ip host 2511-2 2002 172.21.1.1
　　ip host 2511-rj 2003 172.21.1.1
　　ip host 2511-1 2001 172.21.1.1
　　ip host 5200-2 2011 172.21.1.1
　　ip host 2520-1 2004 172.21.1.1
　　ip host 2520-2 2005 172.21.1.1
　　ip host 2600-2 2009 172.21.1.1
　　ip host 2513-1 2006 172.21.1.1
　　ip host pix-1 2016 172.21.1.1
　　!
　　!
　　process-max-time 200
　　!
　　interface Loopback1
　　ip address 172.21.1.1 255.0.0.0
　　
　　!--- This address is used in the IP host commands.
　　!--- Work with loopback interfaces, which are virtual and always available.
　　no ip directed-broadcast
　　!
　　interface Ethernet0
　　ip address 171.55.31.5 255.255.255.192
　　
　　!---  Use a public IP address to ensure connectivity.
　　No ip directed-broadcast
　　no ip mroute-cache
　　!
　　interface Serial0
　　no ip address
　　no ip directed-broadcast
　　no ip mroute-cache
　　shutdown
　　!
　　ip default-gateway 171.55.31.1
　　
　　!--- This is the default gateway when routing is disabled.
　　!--- For example, if the router is in boot ROM mode.

　　ip>　　ip route 0.0.0.0 0.0.0.0 171.55.31.1
　　
　　!--- Set the default route for the external network.
　　no ip http server
　　!
　　line con 0
　　transport input all
　　line 1 16
　　session-timeout 20
　　
　　!--- The session times out after 20 minutes of inactivity.
　　no exec
　　
　　!--- Unwanted signals from the attached device do not launch.
　　!--- An EXEC session ensures that the line never becomes unavailable
　　!--- due to a rogue EXEC process.
　　exec-timeout 0 0
　　
　　!--- This disables exec timeout transport input all.
　　!--- Allow all protocols to use the line.
　　!--- Configure lines 1 - 16 with at least transport input Telnet.
　　line aux 0
　　
　　!--- Auxiliary port can provide dial backup to the network.
　　!--- Note: This configuration does not implement modem on AUX port modem InOut.
　　!--- Allow auxiliary port to support dialout and dialin connections.
　　transport preferred telnet
　　transport input all
　　speed 38400
　　flowcontrol hardware
　　line vty 0 4
　　exec-timeout 60 0
　　password <deleted>
　　login
　　!
　　end