设为首页 收藏本站
查看: 1207|回复: 0

[经验分享] 把ipa中压缩过的png转换成正常PNG的Python脚本

[复制链接]

尚未签到

发表于 2017-5-8 10:33:19 | 显示全部楼层 |阅读模式
  苹果应用安装程序,其实质是一个压缩文件,里面包含应用所需的图片资源,但被压缩过,无法直接拿来使用,需要在MacOSX 中调用pngcrush工具把图片转换成正常的图像才行。在Windows系统上,在sf上有个开源工具号称可以转换,但没搞明白如何使用,放弃了。今天从国外网站找了个Python脚本,还没试,等需要的时候再试。

#---
# iPIN - iPhone PNG Images Normalizer v1.0
# Copyright (C) 2007
#
# Author:
#  Axel E. Brzostowski
#  http://www.axelbrz.com.ar/
#  axelbrz@gmail.com
#
# References:
#  http://iphone.fiveforty.net/wiki/index.php/PNG_Images
#  http://www.libpng.org/pub/png/spec/1.2/PNG-Contents.html
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
#---
from struct import *
from zlib import *
import stat
import sys
import os
def getNormalizedPNG(filename):
pngheader = "\x89PNG\r\n\x1a\n"
file = open(filename, "rb")
oldPNG = file.read()
file.close()
if oldPNG[:8] != pngheader:
return None
newPNG = oldPNG[:8]
chunkPos = len(newPNG)
# For each chunk in the PNG file
while chunkPos < len(oldPNG):
# Reading chunk
chunkLength = oldPNG[chunkPos:chunkPos+4]
chunkLength = unpack(">L", chunkLength)[0]
chunkType = oldPNG[chunkPos+4 : chunkPos+8]
chunkData = oldPNG[chunkPos+8:chunkPos+8+chunkLength]
chunkCRC = oldPNG[chunkPos+chunkLength+8:chunkPos+chunkLength+12]
chunkCRC = unpack(">L", chunkCRC)[0]
chunkPos += chunkLength + 12
# Parsing the header chunk
if chunkType == "IHDR":
width = unpack(">L", chunkData[0:4])[0]
height = unpack(">L", chunkData[4:8])[0]
# Parsing the image chunk
if chunkType == "IDAT":
try:
# Uncompressing the image chunk
bufSize = width * height * 4 + height
chunkData = decompress( chunkData, -8, bufSize)
except Exception, e:
# The PNG image is normalized
return None
# Swapping red & blue bytes for each pixel
newdata = ""
for y in xrange(height):
i = len(newdata)
newdata += chunkData
for x in xrange(width):
i = len(newdata)
newdata += chunkData[i+2]
newdata += chunkData[i+1]
newdata += chunkData[i+0]
newdata += chunkData[i+3]
# Compressing the image chunk
chunkData = newdata
chunkData = compress( chunkData )
chunkLength = len( chunkData )
chunkCRC = crc32(chunkType)
chunkCRC = crc32(chunkData, chunkCRC)
chunkCRC = (chunkCRC + 0x100000000) % 0x100000000
# Removing CgBI chunk
if chunkType != "CgBI":
newPNG += pack(">L", chunkLength)
newPNG += chunkType
if chunkLength > 0:
newPNG += chunkData
newPNG += pack(">L", chunkCRC)
# Stopping the PNG file parsing
if chunkType == "IEND":
break
return newPNG
def updatePNG(filename):
data = getNormalizedPNG(filename)
if data != None:
file = open(filename, "wb")
file.write(data)
file.close()
return True
return data
def getFiles(base):
global _dirs
global _pngs
if base == ".":
_dirs = []
_pngs = []
if base in _dirs:
return
files = os.listdir(base)
for  file in files:
filepath = os.path.join(base, file)
try:
st = os.lstat(filepath)
except os.error:
continue
if stat.S_ISDIR(st.st_mode):
if not filepath in _dirs:
getFiles(filepath)
_dirs.append( filepath )
elif file[-4:].lower() == ".png":
if not filepath in _pngs:
_pngs.append( filepath )
if base == ".":
return _dirs, _pngs
print "-----------------------------------"
print " iPhone PNG Images Normalizer v1.0"
print "-----------------------------------"
print " "
print "[+] Searching PNG files...",
dirs, pngs = getFiles(".")
print "ok"
if len(pngs) == 0:
print " "
print "[!] Alert: There are no PNG files found. Move this python file to the folder that contains the PNG files to normalize."
exit()
print " "
print " -  %d PNG files were found at this folder (and subfolders)." % len(pngs)
print " "
while True:
normalize = raw_input("[?] Do you want to normalize all images (Y/N)? ").lower()
if len(normalize) > 0 and (normalize[0] == "y" or normalize[0] == "n"):
break
normalized = 0
if normalize[0] == "y":
for  ipng in xrange(len(pngs)):
perc = (float(ipng) / len(pngs)) * 100.0
print "%.2f%% %s" % (perc, pngs[ipng])
if updatePNG(pngs[ipng]):
normalized += 1
print " "
print "[+] %d PNG files were normalized." % normalized

运维网声明 1、欢迎大家加入本站运维交流群:群②:261659950 群⑤:202807635 群⑦870801961 群⑧679858003
2、本站所有主题由该帖子作者发表,该帖子作者与运维网享有帖子相关版权
3、所有作品的著作权均归原作者享有,请您和我们一样尊重他人的著作权等合法权益。如果您对作品感到满意,请购买正版
4、禁止制作、复制、发布和传播具有反动、淫秽、色情、暴力、凶杀等内容的信息,一经发现立即删除。若您因此触犯法律,一切后果自负,我们对此不承担任何责任
5、所有资源均系网友上传或者通过网络收集,我们仅提供一个展示、介绍、观摩学习的平台,我们不对其内容的准确性、可靠性、正当性、安全性、合法性等负责,亦不承担任何法律责任
6、所有作品仅供您个人学习、研究或欣赏,不得用于商业或者其他用途,否则,一切后果均由您自己承担,我们对此不承担任何法律责任
7、如涉及侵犯版权等问题,请您及时通知我们,我们将立即采取措施予以解决
8、联系人Email:admin@iyunv.com 网址:www.yunweiku.com

所有资源均系网友上传或者通过网络收集,我们仅提供一个展示、介绍、观摩学习的平台,我们不对其承担任何法律责任,如涉及侵犯版权等问题,请您及时通知我们,我们将立即处理,联系人Email:kefu@iyunv.com,QQ:1061981298 本贴地址:https://www.yunweiku.com/thread-374562-1-1.html 上篇帖子: 序列函数Python零碎知识(2):强大的zip 序列函数 下篇帖子: 函数语句Python Tutorial(四):更多的控制流工具 函数语句
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

扫码加入运维网微信交流群X

扫码加入运维网微信交流群

扫描二维码加入运维网微信交流群,最新一手资源尽在官方微信交流群!快快加入我们吧...

扫描微信二维码查看详情

客服E-mail:kefu@iyunv.com 客服QQ:1061981298


QQ群⑦:运维网交流群⑦ QQ群⑧:运维网交流群⑧ k8s群:运维网kubernetes交流群


提醒:禁止发布任何违反国家法律、法规的言论与图片等内容;本站内容均来自个人观点与网络等信息,非本站认同之观点.


本站大部分资源是网友从网上搜集分享而来,其版权均归原作者及其网站所有,我们尊重他人的合法权益,如有内容侵犯您的合法权益,请及时与我们联系进行核实删除!



合作伙伴: 青云cloud

快速回复 返回顶部 返回列表