cisco AA 配置

我很黑！

　　之前在论坛里看到很多人发帖说AA做不成功，我自己之前也试过，怎么尝试均以失败告终。后来下载Cisco最新的TCL脚本，查看官方的配置例子，才知道原来注意事项有如下：
　　1、不要更改语音文件名
　　2、必须把所有的语音文件都传进Flash
　　3、必须配置队列
　　4、必须要在“telephony-service“下配置“moh en_bacd_music_on_hold.au”
　　不过按照cisco的TCL脚本，如果拨入者听完AA音频后，拨分机必须先拨一个数字键才能拨分机。有谁知道听完AA后直接拨分机的做法吗？
　　下面给出我的配置，套用AA的配置我就不写出来了。
　　application
　　service aa flash:app-b-acd-aa-3.0.0.1.tcl
　　paramspace english language en
　　paramspace english index 1
　　paramspace english location flash:
　　param service-name queue
　　param handoff-string aa
　　param aa-pilot 8005550100
　　param number-of-hunt-grps 2
　　param second-greeting-time 60
　　param call-retry-timer 15
　　param max-time-call-retry 600
　　param voice-mail 5000
　　param max-time-vm-retry 2
　　param dial-by-extension-option 1
　　param max-extension-length 4
　　param welcome-prompt _bacd_welcome.au
　　param menu-timeout 6
　　!
　　service queue flash:app-b-acd-3.0.0.1.tcl
　　param queue-len 10
　　param number-of-hunt-grps 2
　　param aa-hunt2 1111
　　param aa-hunt3 2222
　　param queue-manager-debugs 1
　　————————————————————
　　命令解释：
　　application
　　service aa flash:app-b-acd-aa-3.0.0.1.tcl
　　! defines the application-name of the AA script as aa
　　paramspace english language en
　　! specifies language as English
　　paramspace english index 1
　　paramspace english location flash:
　　! declares location of audio files
　　param service-name queue
　　! associates AA script with queue stript
　　param handoff-string aa
　　! specifies the AA application name that will be used as a handoff string to the call-queue script.
　　param aa-pilot 8005551000
　　! set access number to Cisco Unified CME B-ACD
　　param number-of-hunt-grps 2
　　!declares the number of ephone hunt group menu options. range 1 - 3
　　param second-greeting-time 60
　　! set time interval CME B-ACD waits before playing second (all-agents busy) greeting, range 30 - 120 seconds
　　param call-retry-timer 15
　　! set time interval in which call in queue can attempt to access available ephone-dns and voice mail, range 5 - 30 seconds
　　param max-time-call-retry 600
　　! set maximum time calls can wait in queue, range 60 - 3600 seconds
　　param voice-mail 5000          (经过测试，必须要有voice-mail，现实中如果没有可以随便配置一个没有冲突的号码)
　　! declares B-ACD voice mail pilot number
　　param max-time-vm-retry 2
　　! maximum times CME B-ACD can attempt to transfer call to voicemail, range 1 - 3
　　param dial-by-extension-option  3    (按3键，可拨打内部分机)
　　!declares menu option number for extension dial. This should not overlap with hunt group options
　　param max-extension-length  4    （内部分机号码为四位）
　　! declares the maximum length of the extension that the user can dial when dial-by-extension-option is chosen.
　　! The default value of this parameter is 5. If max-extension-length is set to 0 then there will not be any restriction for number of digits in an extension
　　! exercise caution before setting the max-extension-length to 0 as this may let the user make unauthorized calls
　　param welcome-prompt _aa1_welcome.au   (在Flash卡中，文件名必须为：en_bacd_welcome.au)
　　! declares the welcome prompt. The actual file in the flash should be en_aa1_welcome.au
　　param menu-timeout 6
　　! The default value of this parameter is 4. Range is 1 ? 10. If the number of retries for playing the greeting and menu options exceeds the menu-timeout parameter, the call will be transferred to the operator hunt group. The operator hunt-group is the highest numbered aa-hunt. For example, in sample below the operator hunt group is aa-hunt4, pilot number 2222.
　　service queue flash:app-b-acd-3.0.0.1.tcl
　　!defines the application-name of the queue script as “queue”
　　param queue-len 10
　　!declares the queue length per ephone hunt group, range 10 - 30
　　param number-of-hunt-grps 2
　　!number of hunt-group menu options, range 1 - 3. Should be same as configured in the AA application
　　param aa-hunt3 1111
　　!declares menu option 3 and associates it with the ephone hunt group pilot number 1111
　　param aa-hunt4 2222
　　param queue-manager-debugs 1
　　!enables collection of debugging information. 0 disables collection of debugging information
　　!Enable debug voip ivr script can also be enabled to view the debugs