flume监控

o2geao

　　Flume本身提供了http, ganglia的监控服务，而我们目前主要使用zabbix做监控。因此，我们为Flume添加了zabbix监控模块，和sa的监控服务无缝融合。
　　另一方面，净化Flume的metrics。只将我们需要的metrics发送给zabbix，避免 zabbix server造成压力。目前我们最为关心的是Flume能否及时把应用端发送过来的日志写到Hdfs上， 对应关注的metrics为：

• Source : 接收的event数和处理的event数
  
• Channel : Channel中拥堵的event数
  
• Sink : 已经处理的event数
  

zabbix安装
　　http://my.oschina.net/yunnet/blog/173161
zabbix监控Flume
　　#JVM性能监控
Young GC  counts
sudo  /usr/local/jdk1.7.0_21/bin/jstat -gcutil $(pgrep java)|tail -1|awk '{print  $6}'
Full GC  counts
sudo  /usr/local/jdk1.7.0_21/bin/jstat -gcutil $(pgrep java)|tail -1|awk '{print  $8}'
JVM total  memory usage
sudo  /usr/local/jdk1.7.0_21/bin/jmap -histo $(pgrep java)|grep Total|awk '{print  $3}'
JVM total  instances usage
sudo  /usr/local/jdk1.7.0_21/bin/jmap -histo $(pgrep java)|grep Total|awk '{print  $2}'
#flume应用参数监控
启动时加上JSON repoting参数,这样就可以通过http://localhost:34545/metrics访问
bin/flume-ng agent -n consumer -c conf -f bin/conf.properties -Dflume.monitoring.type=http -Dflume.monitoring.port=34545 &

#生成一些数据
for i in  {1..100};do echo "exec test$i" >> /usr/logs/log.10;echo  $i;done
#通过shell脚本对JSON输出进行排版
curl http://localhost:34545/metrics 2>/dev/null|sed -e  's/\([,]\)\s*/\1\n/g' -e 's/[{}]/\n/g' -e 's/[",]//g'
SOURCE.kafka:
OpenConnectionCount:0
AppendBatchAcceptedCount:0
AppendBatchReceivedCount:0
Type:SOURCE
EventAcceptedCount:7252225
AppendReceivedCount:0
StopTime:0
EventReceivedCount:0
StartTime:1407731371546
AppendAcceptedCount:0
SINK.es:
BatchCompleteCount:10697
ConnectionFailedCount:0
EventDrainAttemptCount:7253061
ConnectionCreatedCount:1
BatchEmptyCount:226
Type:SINK
ConnectionClosedCount:0
EventDrainSuccessCount:7253061
StopTime:0
StartTime:1407731371546
BatchUnderflowCount:14857
SINK.hdp:
BatchCompleteCount:1290
ConnectionFailedCount:0
EventDrainAttemptCount:8057502
ConnectionCreatedCount:35787
BatchEmptyCount:54894
Type:SINK
ConnectionClosedCount:35609
EventDrainSuccessCount:8057502
StopTime:0
StartTime:1407731371545
BatchUnderflowCount:45433
　　
--------------$1 变量！！！eg:EventDrainSuccessCount(source,channel,sink)
#配置监控flume的脚本文件
cat /opt/monitor_flume.sh
curl  http://localhost:34545/metrics 2>/dev/null|sed -e 's/\([,]\)\s*/\1\n/g' -e  's/[{}]/\n/g' -e 's/[",]//g'|grep $1|awk -F: '{print $2}'
curl  http://localhost:34545/metrics 2>/dev/null|sed -e 's/\([,]\)\s*/\1\n/g' -e  's/[{}]/\n/g' -e 's/[",]//g'|grep Total|awk -F: '{print $2}'
curl  http://localhost:34545/metrics 2>/dev/null|sed -e 's/\([,]\)\s*/\1\n/g' -e  's/[{}]/\n/g' -e 's/[",]//g'|grep StartTime|awk -F: '{print $2}'
#在zabbix agent配置文件进行部署
cat  zabbix_flume_jdk.conf
UserParameter=ygc.counts,sudo  /usr/local/jdk1.7.0_21/bin/jstat -gcutil $(pgrep java|head -1)|tail -1|awk  '{print $6}'
UserParameter=fgc.counts,sudo  /usr/local/jdk1.7.0_21/bin/jstat -gcutil $(pgrep java|head -1)|tail -1|awk  '{print $8}'
UserParameter=jvm.memory.usage,sudo  /usr/local/jdk1.7.0_21/bin/jmap -histo $(pgrep java|head -1)|grep Total|awk  '{print $3}'
UserParameter=jvm.instances.usage,sudo  /usr/local/jdk1.7.0_21/bin/jmap -histo $(pgrep java|head -1)|grep Total|awk '{print  $2}'
UserParameter=flume.monitor

,/bin/bash  /opt/monitor_flume.sh $1