Sink Prosessor

xsw222

　　Flume的一些组件（如Spooling Directory Source、File Channel）能够保证agent挂掉后不丢失数据。
　　1、负载均衡
　　1）Load balancing Sink Processor
　　source里的event流经channel，进入sink组，在sink组内部根据负载算法（round_robin、random）选择sink，后续可以选择不同机器上的agent实现负载均衡。


　　实例如下：

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37

# Name the components on this agent a1.sources = r1 a1.sinks = k1 k2 a1.channels = c1    # Describe/configure the source a1.sources.r1.type = exec a1.sources.r1.channels=c1 a1.sources.r1.command=tail -F /home/flume/xx.log #define sinkgroups a1.sinkgroups=g1 a1.sinkgroups.g1.sinks=k1 k2 a1.sinkgroups.g1.processor.type=load_balance a1.sinkgroups.g1.processor.backoff=true a1.sinkgroups.g1.processor.selector=round_robin #define the sink 1 a1.sinks.k1.type=avro a1.sinks.k1.hostname=192.168.1.112 a1.sinks.k1.port=9876   #define the sink 2 a1.sinks.k2.type=avro a1.sinks.k2.hostname=192.168.1.113 a1.sinks.k2.port=9876 # Use a channel which buffers events in memory a1.channels.c1.type = memory a1.channels.c1.capacity = 1000 a1.channels.c1.transactionCapacity = 100    # Bind the source and sink to the channel a1.sources.r1.channels = c1 a1.sinks.k1.channel = c1 a1.sinks.k2.channel=c1

　　
　　2）Load balancing Log4J Appender
　　不同的agent处理同一个client产生的数据。

1 2 3

log4j.rootLogger=INFO,flume log4j.appender.flume = org.apache.flume.clients.log4jappender.LoadBalancingLog4jAppender log4j.appender.flume.Hosts = 192.168.1.111:41414 192.168.1.111:41414

　　
　　2、故障转移
　　Failover Sink Processor
　　配置一组sink，这组sink组成一个Failover Sink Processor，当有一个sink处理失败，Flume将这个sink放到一个地方，等待冷却时间，可以正常处理event时再拿回来。
　　
　　event通过通过一个channel流向一个sink组，在sink组内部根据优先级选择具体的sink，一个失败后再转向另一个sink，流程图如下：

　　实例如下：
　　

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38

# Name the components on this agent a1.sources = r1 a1.sinks = k1 k2 a1.channels = c1    # Describe/configure the source a1.sources.r1.type = exec a1.sources.r1.channels=c1 a1.sources.r1.command=tail -F /home/flume/xx.log #define sinkgroups a1.sinkgroups=g1 a1.sinkgroups.g1.sinks=k1 k2 a1.sinkgroups.g1.processor.type=failover a1.sinkgroups.g1.processor.priority.k1=10 a1.sinkgroups.g1.processor.priority.k2=5 a1.sinkgroups.g1.processor.maxpenalty=10000 #define the sink 1 a1.sinks.k1.type=avro a1.sinks.k1.hostname=192.168.1.112 a1.sinks.k1.port=9876 #define the sink 2 a1.sinks.k2.type=avro a1.sinks.k2.hostname=192.168.1.113 a1.sinks.k2.port=9876 # Use a channel which buffers events in memory a1.channels.c1.type = memory a1.channels.c1.capacity = 1000 a1.channels.c1.transactionCapacity = 100 # Bind the source and sink to the channel a1.sources.r1.channels = c1 a1.sinks.k1.channel = c1 a1.sinks.k2.channel=c1

　　
　　
　　
　　
　　


来自为知笔记(Wiz)