思科——硬件板级设计（Hardware Board Design Engineer）要求

plantegg

Prepare for next year~~~
1. Hardware Board Design Engineer-CABU-Shanghai
工作类型：全职工作地点：上海薪资待遇：面议所属职类：技术研发招聘人数：若干所属部门：---发布日期：2012-10-09截止日期：2012-12-08Responsibilities:
1、Participates on a project team of engineers involved in the specification, design, development and test of hardware for HFC products.
2、Design hardware PCB board including power supply, micro controller, AD/DA and etc.
3、Interfaces cross-functionally at the working team level.
4、Work closely with SW design engineer, layout engineer, mechanical engineer and test engineer throughout the development process

Requirements:
Must have skill/experiences
1、Familiar with 8/16/32 bit MCU/Network processor or CPLD/FPGA,
2、Familiar with ECAD tool, such as Protel(Altium Designer), Cadence Concept/Allegro, or MetorDxDesigner.
3、Familiar with ADC/DAC,and interface such as RS232, RS485, SPI and I2C
4、Experience in board level bring up
5、Knowledge in high speed circuit design
6、Fluent English speaking and writing

Good to have skill/experiences
1、Capability of proficiency with spice (or equivalent) circuit simulation
2、Networking knowledge such as TCP/IP, MAC and PHY layers
3、General knowledge of modulation such as QAM and OFDM
4、knowledge for DOCSIS, HFC, PON or WiFi
5、Hands-on trouble shooting experience

Educational Background
Typically requires MSEE/CS
2. Hardware Board Design Engineer-UFSSPG-Shanghai
工作类型：全职工作地点：上海薪资待遇：面议所属职类：技术研发招聘人数：若干所属部门：---发布日期：2012-10-09截止日期：2012-12-08Responsibilities:
1、Participates on a project team of engineers involved in the specification, design, development and test of hardware for networking products.
2、Design hardware solutions and work in the team to develop boards.
3、Interfaces cross-functionally at the working team level.
4、Work closely with ASIC, Design for Test, diagnostics, software and mechanical developers throughout the development process.
5、Job involves setting up and monitoring Electronic Design Verification Test units.

Requirements:
Must have skill/experiences
1、Knowledge in high speed circuit design;
2、Familiar with ECAD tool, such as Cadence Concept/Allegro, or MetorDxDesigner.
3、Familiar with Verilog HDL or VHDL HDL.
4、Experience in system level bring up.
5、Problem solving requires originality and ingenuity using knowledge gained while specializing in field.
6、Self-motivation, teamwork and strong communication skills are essential

Good to have skill/experiences
1、Experience with FPGA simulation or design verification techniques.
2、Knowledge in EMC/EMI
3、Capability of proficiency with spice (or equivalent) circuit simulation, field-solver and time/frequency domain analysis, familiarity with high speed serdes design, PLL design and LVDS, LVPECL, CML and other high-performance I/O technologies.
4、Experience correlating simulation results with lab measurements using oscilloscopes, TDRs and spectrum analyzers

Educational Background
Typically requires MSEE/CS/Automation Control/Ph.D
3. Hardware Engineer-SAVBU-Shanghai
工作类型：全职工作地点：上海薪资待遇：面议所属职类：技术研发招聘人数：若干所属部门：---发布日期：2012-10-09截止日期：2012-12-08Responsibilities:
1、Responsible for next generation server or data center switch HW design
2、Responsible for qualification of HDD, DIMM, PCIe and relative part qualification of Cisco next generation server.
3、Co-ordinate with US team for any design or qual issue.
4、Co-ordinate with Manufacture vendors for any production issue.
5、Make test for investigation in case there meets with issue during design or qual process.

Requirements:
Must have skill/experiences
1、Electronic, communication, automation or related major
2、Gooding communication skill
3、Good sense of team working

Good to have skill/experiences
1、Knowledge of X86 architecture
2、Fluent written and oral English skill

Educational Background
Typically requires Master Degree

Key Words:PCB Board,Bus,MCU,English