设为首页 收藏本站
查看: 2123|回复: 0

[经验分享] Linux-pam_cracklib.so选项详解

[复制链接]
累计签到:1 天
连续签到:1 天
发表于 2015-11-5 09:06:02 | 显示全部楼层 |阅读模式
pam_cracklib.so位于/etc/pam.d/system-auth中

pam_cracklib.so 相关的 options

debug
This option makes the module write information to syslog(3) indicating the behavior of the module
(this option does not write password information to the log file).

authtok_type=XXX
The default action is for the module to use the following prompts when requesting passwords:
"New UNIX password: " and "Retype UNIX password: ".
The example word UNIX can be replaced with this option, by default it is empty.

retry=N
Prompt user at most N times before returning with error. The default is 1.

difok=N
This argument will change the default of 5 for the number of characters in the new password
that must not be present in the old password. In addition, if 1/2 of the characters in the new password are different
then the new password will be accepted anyway.

difignore=N
How many characters should the password have before difok will be ignored. The default is 23.

minlen=N
The minimum acceptable size for the new password (plus one if credits are not disabled which is the default).
In addition to the number of characters in the new password, credit (of +1 in length) is given for each different
kind of character (other, upper, lower and digit). The default for this parameter is 9 which is good for a old style
UNIX password all of the same type of character but may be too low to exploit the added security of a md5 system.
Note that there is a pair of length limits in Cracklib itself, a "way too short" limit of 4 which is hard coded in and
a defined limit (6) that will be checked without reference to minlen. If you want to allow passwords as short as 5 characters
you should not use this module.

dcredit=N
(N >= 0) This is the maximum credit for having digits in the new password. If you have less than or N digits,
each digit will count +1 towards meeting the current minlen value. The default for dcredit is 1 which is the
recommended value for minlen less than 10.
(N < 0) This is the minimum number of digits that must be met for a new password.

ucredit=N
(N >= 0) This is the maximum credit for having upper case letters in the new password.
If you have less than or N upper case letters each letter will count +1 towards meeting the current minlen value.
The default for ucredit is 1 which is the recommended value for minlen less than 10.
(N < 0) This is the minimum number of upper case letters that must be met for a new password.

lcredit=N
(N >= 0) This is the maximum credit for having lower case letters in the new password.
If you have less than or N lower case letters, each letter will count +1 towards meeting the current minlen value.
The default for lcredit is 1 which is the recommended value for minlen less than 10.
(N < 0) This is the minimum number of lower case letters that must be met for a new password.

ocredit=N
(N >= 0) This is the maximum credit for having other characters in the new password.
If you have less than or N other characters, each character will count +1 towards meeting the current minlen value.
The default for ocredit is 1 which is the recommended value for minlen less than 10.
(N < 0) This is the minimum number of other characters that must be met for a new password.

minclass=N
The minimum number of required classes of characters for the new password. The default number is zero.
The four classes are digits, upper and lower letters and other characters. The difference to the credit check is that
a specific class if of characters is not required. Instead N out of four of the classes are required.

maxrepeat=N
Reject passwords which contain more than N same consecutive characters.
The default is 0 which means that this check is disabled.

reject_username
Check whether the name of the user in straight or reversed form is contained in the new password.
If it is found the new password is rejected.

use_authtok
This argument is used to force the module to not prompt the user for a new password
but use the one provided by the previously stacked password module.

dictpath=/path/to/dict
Path to the cracklib dictionaries.


运维网声明 1、欢迎大家加入本站运维交流群:群②:261659950 群⑤:202807635 群⑦870801961 群⑧679858003
2、本站所有主题由该帖子作者发表,该帖子作者与运维网享有帖子相关版权
3、所有作品的著作权均归原作者享有,请您和我们一样尊重他人的著作权等合法权益。如果您对作品感到满意,请购买正版
4、禁止制作、复制、发布和传播具有反动、淫秽、色情、暴力、凶杀等内容的信息,一经发现立即删除。若您因此触犯法律,一切后果自负,我们对此不承担任何责任
5、所有资源均系网友上传或者通过网络收集,我们仅提供一个展示、介绍、观摩学习的平台,我们不对其内容的准确性、可靠性、正当性、安全性、合法性等负责,亦不承担任何法律责任
6、所有作品仅供您个人学习、研究或欣赏,不得用于商业或者其他用途,否则,一切后果均由您自己承担,我们对此不承担任何法律责任
7、如涉及侵犯版权等问题,请您及时通知我们,我们将立即采取措施予以解决
8、联系人Email:admin@iyunv.com 网址:www.yunweiku.com

所有资源均系网友上传或者通过网络收集,我们仅提供一个展示、介绍、观摩学习的平台,我们不对其承担任何法律责任,如涉及侵犯版权等问题,请您及时通知我们,我们将立即处理,联系人Email:kefu@iyunv.com,QQ:1061981298 本贴地址:https://www.yunweiku.com/thread-135218-1-1.html 上篇帖子: RHEL6.5上安装配置Cobbler 下篇帖子: DDNS在生产环境中的应用 Linux
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

扫码加入运维网微信交流群X

扫码加入运维网微信交流群

扫描二维码加入运维网微信交流群,最新一手资源尽在官方微信交流群!快快加入我们吧...

扫描微信二维码查看详情

客服E-mail:kefu@iyunv.com 客服QQ:1061981298


QQ群⑦:运维网交流群⑦ QQ群⑧:运维网交流群⑧ k8s群:运维网kubernetes交流群


提醒:禁止发布任何违反国家法律、法规的言论与图片等内容;本站内容均来自个人观点与网络等信息,非本站认同之观点.


本站大部分资源是网友从网上搜集分享而来,其版权均归原作者及其网站所有,我们尊重他人的合法权益,如有内容侵犯您的合法权益,请及时与我们联系进行核实删除!



合作伙伴: 青云cloud

快速回复 返回顶部 返回列表