H3C AR路由器 debugging PIM DM命令

小风儿

　　举例】
例1：打开PIM DM声明信息调试功能
　　Linux 技术论坛   Ubuntu安装与应用  Ubuntu冲浪  Linux网络安全
Linux服务器集群     


<Quidway> debugging PIM DM alert
<Quidway>display debugging
PIM-DM alert debugging switch is on
*0.2350915882 3552G_management RM/7/RTDBG:PIMDM ALERT: SG PRUNE: (10.110.0.2, 225.0.0.1)
// PIM DM Alert信息,SG(10.110.0.2, 225.0.0.1)剪枝                                                                        
*0.2350915893 3552G_management RM/7/RTDBG:PIMDM ALERT: SG PRUNE: (10.110.0.2, 225.0.0.1), but route not found in PIM-DM MRT!                                    
// PIM DM Alert信息,SG(10.110.0.2, 225.0.0.1)剪枝,但是路由器没有发现PIM DM MRT
*0.2350917590 3552G_management RM/7/RTDBG:PIMDM ALERT: SG CREATION: (10.110.0.2, 225.0.0.1)
// PIM DM Alert信息,创建SG项
*0.243863 5232 RM/7/RTDBG:PIMDM ALERT: WRONGIF: (10.110.0.2, 225.0.0.1), Ethernet0/0(12.110.0.2), no downstream
// PIM DM Alert信息,组(10.110.0.2, 225.0.0.1)在接口e0/0上没有下游

例2：打开PIM DM路由表调试信息功能
<Quidway> debugging PIM DM mrt
<Quidway>display debugging
PIM-DM MRT operation debugging switch is on
*0.23509141353552G_management RM/7/RTDBG:PIMDM MRT: Ready to make pruned downstreamVlan-interface101(1.1.1.1) of (10.110.0.2, 225.0.0.1) forwarding   
//PIM DM MRT 报文,已经准备好使用被剪枝的下游vlan进行转发
*0.23509158633552G_management RM/7/RTDBG:PIMDM MRT: Ready to delete downstream  Vlan-interface101(1.1.1.1) from (10.110.0.2, 225.0.0.1)
//PIM DM MRT 报文,已经准备好删除将下游vlan101从组(10.110.0.2, 225.0.0.1)中删除   
*0.23509176103552G_management RM/7/RTDBG:PIMDM MRT: Set (10.110.0.2, 225.0.0.1)'s  upstream to Vlan-interface104(10.110.0.1), neighbor NULL                     
//PIM MD MRT信息,设置(10.110.0.2, 225.0.0.1)的上游vlan 为vlan104
*0.23509176203552G_management RM/7/RTDBG:PIMDM MRT: Upstream interface  Vlan-interface104(10.110.0.1) added to (10.110.0.2/32, 225.0.0.1/32)                    
//PIM MD MRT信息,上游接口vlan104加入组(10.110.0.2, 225.0.0.1)
*0.23509176303552G_management RM/7/RTDBG:PIMDM MRT: Adding downstream interface  Vlan-interface101(1.1.1.1) to (10.110.0.2, 225.0.0.1)                          
//PIM MD MRT信息,添加vlan101的下游接口
*0.23509176403552G_management RM/7/RTDBG:PIMDM MRT: Ready to create a downstream  Vlan-interface101(1.1.1.1) in (10.110.0.2, 225.0.0.1)                        
//PIM MD MRT信息,已经准备好创建vlan104的下游接口
*0.23509176513552G_management RM/7/RTDBG:PIMDM MRT: Adding downstream interface  Vlan-interface103(2.2.2.1) to (10.110.0.2, 225.0.0.1)                          
//PIM MD MRT信息,添加下游接口2.2.2.1到组(10.110.0.2, 225.0.0.1)
*0.23509176603552G_management RM/7/RTDBG:PIMDM MRT: Ready to create a downstream  Vlan-interface103(2.2.2.1) in (10.110.0.2, 225.0.0.1)     
//PIM MD MRT信息,已经准备好创建vlan103的下游接口
*0.23509221673552G_management RM/7/RTDBG:PIMDM MRT: Ready to prune a downstream  Vlan-interface101(1.1.1.1) from (10.110.0.2, 225.0.0.1)      
//PIM MD MRT信息,已经准备好剪除下游接口vlan101

例3：打开PIM DM接收/发送报文调试功能
<Quidway>deb PIM DM packet
<Quidway>display debugging
PIM DM packet debugging switch is on
<Quidway> debugging PIM DM send all
<Quidway>display debugging
PIM-DM all packet send debugging switch is on

例3.1：打开PIM DM接收/发送声明报文调试功能
<Quidway>debugging pim dm recv assert
<Quidway>display debugging
PIM-DM assert packet recv debugging switch is on
<Quidway>debugging pim dm send assert
<Quidway>display debugging
PIM-DM assert packet send debugging switch is on   

*0.233682104640_2 RM/7/RTDBG:PIMDM RCVASSERT: Received an assert from 12.110.0.1 at interface Ethernet0/0/0(12.110.0.3) for (10.110.0.2, 225.0.0.1), pref  60, metric 0                                                                        
//接收到一个来自12.110.0.1的声明消息
*0.233684204640_2 RM/7/RTDBG:PIMDM RCVASSERT: They are processing (10.110.0.2,  225.0.0.1) assert outside interface Ethernet0/0/0(12.110.0.3)...               
//接收到一个声明消息,正在处理组(10.110.0.2, 225.0.0.1)到接口e0/0/0以外的声明
*0.233686004640_2 RM/7/RTDBG:PIMDM RCVASSERT: (10.110.0.2, 225.0.0.1) has no  Assert states yet, neighbor 12.110.0.1 become the Assert winner
//组10.110.0.2, 225.0.0.1)没有进入声明状态,邻居12.110.0.1赢得声明战争                  
*0.23369160 4640_2 RM/7/RTDBG:PIMDM RCVASSERT: And my current upstream nbr is 12.110.0.1, pref 60, metric 0                                                     
//接收到声明消息,我的上游nbr为12.110.0.1
*0.233692904640_2 RM/7/RTDBG:PIMDM RCVASSERT: Challenger neighbor 12.110.0.2 won in (10.110.0.2, 225.0.0.1) assert, and my current upstream neighbor  12.110.0.1 lost                                                                           
//接收到声明消息,12.110.0.2赢得声明战争,我与当前上游邻居12.110.0.1失去联络
*0.23369490 4640_2 RM/7/RTDBG:PIMDM RCVASSERT: Updating (10.110.0.2, 225.0.0.1)'s upstream forwarder to 12.110.0.2                                             
//接收到声明消息,更新12.110.0.2为上游转发者
*0.357492290Quidway RM/7/RTDBG:PIMDM RCVASSERT: Received an assert from 12.110.0.2at interface Ethernet0/0/0(12.110.0.1) for (10.110.0.2, 225.0.0.1), pref  60,metric 0                                                                        
//接收到12.110.0.2发送的关于组的(10.110.0.2, 225.0.0.1)声明消息
*0.357492500Quidway RM/7/RTDBG:PIMDM RCVASSERT: We lost in (10.110.0.2, 225.0.0.1)assert on interface Ethernet0/0/0(12.110.0.1), pruning...                    
//接收到声明的消息:我们被组(10.110.0.2, 225.0.0.1)剪枝
*0.6536470 5232 RM/7/RTDBG:PIMDM RCVASSERT: We won in (10.110.0.2, 225.0.0.1) assert on interface Ethernet0/0(12.110.0.2)
//在接口e0/0我们赢得了声明战争
*0.65366205232 RM/7/RTDBG:PIMDM RCVASSERT: We won in (10.110.0.2, 225.0.0.1)  assert, sending out an assert at Ethernet0/0(12.110.0.2) to let others  know
//我们赢得了声明战争,我们要发送一个声明信息让其他路由器知道
*0.357492110Quidway RM/7/RTDBG:PIMDM SENDASSERT: Sending an assert for (10.110.0.2,  225.0.0.1) at Ethernet0/0/0(12.110.0.1), pref 60, metric 0                  
//在接口e0/0/0上发送一个组(10.110.0.2, 225.0.0.1)的声明信息

例3.2：打开PIM DM接收/发送嫁接报文调试功能
<Quidway>debugging pim dm recv graft
<Quidway>display debugging
PIM-DM graft packet recv debugging switch is on
<Quidway>debugging pim dm send graft
<Quidway>display debugging
PIM-DM graft packet send debugging switch is on

*0.23509141223552G_management RM/7/RTDBG:PIMDM RCVGRAFT: Received graft on interface  Vlan-interface101(1.1.1.1), dest to 1.1.1.1, 1 groups, sent by 1.1.1.2  
//接收到PIM DM嫁接信息,目的地址为1.1.1.1  
*0.23509141263552G_management RM/7/RTDBG:PIMDM RCVGRAFT: Received (10.110.0.2,  225.0.0.1) graft on interface Vlan-interface101(1.1.1.1), making pruned downstream forwarding  
//接收到组(10.110.0.2, 225.0.0.1)的嫁接信息,使被剪枝的下游开始转发
*0.357491950Quidway RM/7/RTDBG:PIMDM SENDGRAFT: Ready to send a (10.110.0.2,  225.0.0.1) graft at Ethernet1/0/0(1.1.1.2) to 1.1.1.1                              
//发送嫁接信息,准备好将(10.110.0.2, 225.0.0.1)嫁接到e1/0/0
*0.23509176813552G_management RM/7/RTDBG:PIMDM SENDGRAFT: Cannot send (10.110.0.2, 225.0.0.1) graft upstream, for no upstream neighbor!                  
//发送PIM DM嫁接信息,不能发送组(10.110.0.2, 225.0.0.1)的信息流到嫁接分支上游,因为没有上游邻居

例3.3：打开PIM DM接收/发送嫁接回应报文调试功能
<Quidway>debugging pim dm recv graft-ack
<Quidway>display debugging
PIM-DM graft-ack packet recv debugging switch is on
<Quidway>debugging pim dm send graft-ack
<Quidway>display debugging
PIM-DM graft-ack packet send debugging switch is on
*0.357703360 Quidway RM/7/RTDBG:PIMDM RCVGRAFTACK: Received graft-ack on interface Ethernet1/0/0(1.1.1.2)                                                        
//在接口e1/0/0上接收到嫁接回应
*0.357703490Quidway RM/7/RTDBG:PIMDM RCVGRAFTACK: Received (10.110.0.2, 225.0.0.1)graft-ack, but we did not send a graft, skipping it                          
//接收到嫁接回应信息,但本机没有发送嫁接信息,丢弃该报文
*0.233953504640_2 RM/7/RTDBG:PIMDM RCVGRAFTACK: Received (10.110.0.2, 225.0.0.1) graft-ack on interface Ethernet0/0/0(12.110.0.3) acknowledged                 
//接收到来自组(10.110.0.2, 225.0.0.1)的嫁接回应
*0.2350914146 3552G_management RM/7/RTDBG:PIMDM SENDGRAFTACK: Sending graft-ack on interface Vlan-interface101(1.1.1.1)
//发送嫁接回应信息,将(10.110.0.2, 225.0.0.1)嫁接到e1/0/0
*0.519320 5232 RM/7/RTDBG:PIMDM SENDGRAFTACK: Sending graft-ack on interface Ethernet0/0(12.110.0.2)
//在e0/0上发送PIM DM嫁接回应信息  

例3.4：打开PIM DM接收/发送组加入报文调试功能
<Quidway>debugging pim dm recv join
<Quidway>display debugging
PIM-DM join packet recv debugging switch is on  
<Quidway>debugging pim dm send join
<Quidway>display debugging
PIM-DM join packet send debugging switch is on

*0.35770来自2690 Quidway RM/7/RTDBG:PIMDM RCVJOINPRUNE: Received join/prune pkt dest to 12.110.0.2, 1 groups, sent by 12.110.0.3                                    
//接收到12.110.0.3的join/prune报文
*0.357702840 Quidway RM/7/RTDBG:PIMDM RCVJOINPRUNE: Processing join/prune pkt, group 1: 225.0.0.1, 1 join, 0 prune                                               
//接收到225.0.0.1的报文,将有一个成员加入该组
*0.1706568404640_2 RM/7/RTDBG:PIMDM SEND_JOIN: Sending a join (10.110.0.2,  225.0.0.1) at Ethernet0/0/0(12.110.0.3), dest 224.0.0.13, to 12.110.0.1   
//发送组加入报文到给所有PIM路由器，要求加入到组(10.110.0.2, 225.0.0.1)

例3.5：打开PIM DM接收/发送剪枝报文调试功能
<Quidway>debugging pim dm recv prune
<Quidway>display debugging
PIM-DM prune packet recv debugging switch is on
<Quidway>debugging pim dm send prune
<Quidway>display debugging
PIM-DM prune packet send debugging switch is on   

*0.357487230 Quidway RM/7/RTDBG:PIMDM RCVJOINPRUNE: Received join/prune pkt dest to 12.110.0.1, 1 groups, sent by 12.110.0.3
//接收到来自12.110.0.3的join/prune信息,目的地址是12.110.0.1                                    
*0.357487380 Quidway RM/7/RTDBG:PIMDM RCVJOINPRUNE: Processing join/prune pkt, group 1: 225.0.0.1, 0 join, 1 prune     
//接收到处理组225.0.0.1的剪枝信息                                          
*0.357487520Quidway RM/7/RTDBG:PIMDM RCVPRUNE: Received (10.110.0.2,  225.0.0.1)prune at Ethernet0/0/0, flags=0x0, sent by 12.110.0.3                           
//接收到12.110.0.3的剪枝信息
*0.357487680Quidway RM/7/RTDBG:PIMDM RCVPRUNE: Interface Ethernet0/0/0 has been  pruned in (10.110.0.2, 225.0.0.1), reset the timeout time to 210 seconds        
//接收到e0/0/0已经将组播源为10.110.0.2,组播组地址为225.0.0.1的组剪枝,重置超时时间为210s
*0.233634904640_2 RM/7/RTDBG:PIMDM SENDPRUNE: Sending a prune (10.110.0.2,  225.0.0.1) at Ethernet0/0/0(12.110.0.3), dest 224.0.0.13, to 12.110.0.1,holdtime 210 seconds                                                                       
//发送剪枝信息给所有PIM路由器

例4：打开PIM DM报文计时器调试功能
<Quidway> debugging PIM DM timer
<Quidway>display debugging
PIM-DM timer debugging switch is on  
*0.9722250 Quidway RM/7/RTDBG:PIMDM TIMER: It's time to clean up PIM-DM MRT
//MRT老化计时器超时，开始清除组播路由表
*0.9734550 Quidway RM/7/RTDBG:PIMDM MRT_TIMER: It's time to update PIM-DM MRT
// PIM DM 路由表更新计时器超时，开始更新组播路由表
*0.2006386680 4640_2 RM/7/RTDBG:PIMDM TIMER: Interface Ethernet0/0/0(12.110.0.3)'s neighbor 12.110.0.1 timeout   
//PIM DM 邻居12.110.0.3超时，邻居被删除
*0.2006394070 4640_2 RM/7/RTDBG:PIMDM TIMER: Arranging next PIM-DM MRT cleaning up after 15 seconds
//安排在15秒后下一次PIM DM MRT清除
*0.2350917569 3552G_management RM/7/RTDBG:PIM TIMER: Create PIM NBR timeout Timer on interface Vlan-interface104(10.110.0.1)                                    
//PIM TIMER信息,在vlan 104上创建PIM NBR超时计时器
*0.23509175803552G_management RM/7/RTDBG:PIM TIMER: Start pim hello packet send  timer on interface Vlan-interface104(10.110.0.1)                     
//在vlan104上的PIM hello报文的发送计时器开始计时

例5：打开PIM DM警告调试信息功能
<Quidway> debugging PIM DM all
<Quidway>display debugging
PIM-DM warning debugging switch is on
*0.455700 5232 RM/7/RTDBG:PIMDM WARNING: Cannot send join/prune, no upstream router specified!
　　//PIM DM警告信息,不能发送join/prune,没有上游路由器
　　

Ununtn网络管理

yeslab老余4ccie经典视频OSPF全套视频

yeslab老余4ccie经典视频BGP三集全套视频

博锐教育 郑sir ccnp 视频分享 路由集合贴

yeslab 4ccie老余经典视频mpls首次全套发布

yeslab老余4ccie经典视频QOS

西安威克诺 CCNA and CCNP 实验手册 v1.0

利用VMware和Dynamips搭建广域网实验环境

VMware的三种网络。实验必看

Cisco ISP必备手册中文版

Cisco IP电话技术电子书

　　Juniper Cis 整套视频出售
　　Juniper Cia 整套视频出售
　　文章转载至http://bbs.net527.cn  思科网络技术论坛
思科视频下载
　　CCNP

　　无忧网客联盟主站

             版权声明：本文为博主原创文章，未经博主允许不得转载。