Wamp5无法启动服务问题的解决

g87616758

　　我今天突然想学php，刚安装了一个Wamp5，但启动服务的时候Apache和mysql都起不来。通过上网找原因和实际分析，发现是因为我的电脑里已经安装了Apache和mysql，且这两个服务都已启动。后来我把Apache卸了，在Wamp5启动Apache就成功了。但我却不想将mysql也卸了，所以只好另谋出路。最后发现Wamp里的mysql和原先的mysql端口地址相同(请看mysql安装目录下的my.ini和Wamp安装目录mysql文件夹下的my.ini)，导致只能启动一个mysql。
　　因此我将Wamp安装目录下的mysql文件夹下的my.ini文件里的端口改为3307，这样就可以了！下面是my.ini里的部分代码，红色部分为修改的地方。
　　# The following options will be read by MySQL client applications.
# Note that only client applications shipped by MySQL are guaranteed
# to read this section. If you want your own MySQL client program to
# honor these values, you need to specify it as an option during the
# MySQL client library initialization.
#
[client]
　　port=3307
　　
# SERVER SECTION
# ----------------------------------------------------------------------
#
# The following options will be read by the MySQL Server. Make sure that
# you have installed the server correctly (see above) so it reads this
# file.
#
[wampmysqld]
　　# The TCP/IP Port the MySQL Server will listen on
port=3307

             版权声明：本文为博主原创文章，未经博主允许不得转载。