error: %preun(keepalived-1.2.7-3.el6.x86_64) scriptlet failed, exit status 1 解决

wuaji

　　重装 lvs
　　之前装了 ipvsadm 和 keepalived
　　用 rpm -e ipvsadm 意见通过
　　但 rpm -e keepalived 时，提示
　　[iyunv@lvs1 ipvs]# rpm -e keepalived-1.2.7
error reading information on service keepalived: No such file or directory
error: %preun(keepalived-1.2.7-3.el6.x86_64) scriptlet failed, exit status 1

　　这上面是我删除 /etc/keepalived/*  /sbin/keepalived /etc/init.d/keepalived 之后出现的
　　解决如下：
　　查看 keepalived 完整安装包文件
　　[iyunv@lvs1 ipvs]# rpm -qa | grep keepalived
keepalived-1.2.7-3.el6.x86_64

　　

　　强制干掉
　　[iyunv@lvs1 ipvs]# rpm -e --noscripts keepalived-1.2.7-3.el6.x86_64
[iyunv@lvs1 ipvs]# rpm -qa | grep keepalived

　　

　　解决问题
　　

　　还有情况，就是在能停止 keepalived 服务情况下：
　　[lvs]# rpm -qa | grep keepalived
keepalived-1.2.7-3.el6.x86_64
[lvs]# rpm -qa | grep ipvsadm
ipvsadm-1.25-10.el6.x86_64
[lvs]# service keepalived stop
Stopping keepalived:                                       [  OK  ]
[lvs]# rpm -e keepalived
warning: /etc/keepalived/keepalived.conf saved as /etc/keepalived/keepalived.conf.rpmsave
[lvs]# service keepalived stop
keepalived: unrecognized service
[lvs]# rpm -qa | grep keepalived
[lvs]# rpm -e ipvsadm
[lvs]# rpm -qa | grep ipvsadm

　　

         版权声明：本文为博主原创文章，未经博主允许不得转载。