windows安装zabbix_anget

9780j

1、下载zabbix_anget
下载地址为：
http://www.zabbix.com/downloads/2.4.4/zabbix_agents_2.4.4.win.zip

2、修改zabbix_agentd.win.conf文件
将压缩包解压缩至c:\zabbix\
然后将c:\zabbix\conf\zabbix_agentd.win.conf修改
全文如下：

# This is config file for zabbix_agentd

# To get more information about ZABBIX, go http://www.zabbix.com

############ GENERAL PARAMETERS #################

# List of comma delimited IP addresses (or hostnames) of ZABBIX servers.

# No spaces allowed. First entry is used for sending active checks.

# Note that hostnames must resolve hostname->IP address and

# IP address->hostname.

Server=192.168.2.207

# Server port for sending active checks

#ServerPort=10051

# Unique hostname. Required for active checks.

Hostname=win2203

# Listen port. Default is 10050

#ListenPort=10050

# IP address to bind agent

# If missing, bind to all available IPs

#ListenIP=127.0.0.1

# Number of pre-forked instances of zabbix_agentd.

# Default value is 5

# This parameter must be between 1 and 16

StartAgents=5

# How often refresh list of active checks. 2 minutes by default.

#RefreshActiveChecks=120

# Disable active checks. The agent will work in passive mode listening server.

#DisableActive=1

# Enable remote commands for ZABBIX agent. By default remote commands disabled.

#EnableRemoteCommands=1

# Specifies debug level

# 0 - debug is not created

# 1 - critical information

# 2 - error information

# 3 - warnings (default)

# 4 - for debugging (produces lots of information)

DebugLevel=3

# Name of PID file

#PidFile=/var/tmp/zabbix_agentd.pid

# Name of log file.

# If not set, syslog will be used

LogFile=C:/zabbix/zabbix_agentd.log

# Maximum size of log file in MB. Set to 0 to disable automatic log rotation.

#LogFileSize=1

# Spend no more than Timeout seconds on processing

# Must be between 1 and 30

Timeout=3

####### USER-DEFINED MONITORED PARAMETERS #######

# Format: UserParameter=<key>,<shell command>

# Note that shell command must not return empty string or EOL only

#UserParameter=system.test,who|wc -l

### Set of parameter for monitoring MySQL server (v3.23.42 and later)

### Change -u<username> and add -p<password> if required

#UserParameter=mysql.ping,mysqladmin -uroot ping|grep alive|wc -l

#UserParameter=mysql.uptime,mysqladmin -uroot status|cut -f2 -d":"|cut -f1 -d"T"

#UserParameter=mysql.threads,mysqladmin -uroot status|cut -f3 -d":"|cut -f1 -d"Q"

#UserParameter=mysql.questions,mysqladmin -uroot status|cut -f4 -d":"|cut -f1 -d"S"

#UserParameter=mysql.slowqueries,mysqladmin -uroot status|cut -f5 -d":"|cut -f1 -d"O"

#UserParameter=mysql.qps,mysqladmin -uroot status|cut -f9 -d":"

#UserParameter=mysql.version,mysql -V

zabbix_agentd.win.conf全文，红色加线部分需要修改，Server为zabbix服务器端ip，hostname为本机名，logfile为日志文件地址。

将zabbix_agentd.win.conf复制到  c:\zabbix\bin\win64\  目录下（32位系统复制到bin\win32目录下）

将zabbix_agentd.win.conf复制到  c:\ 根目录下，然后修改文件名为zabbix_agentd.conf

在c:\zabbix新建一个zabbix_angetd.log文件。（日志文件）

3、执行安装命令
点开始》运行》cmd 打开命令行窗口
输入c:\zabbix\bin\win64\zabbix_angetd -i

4、启动zabbix_agent服务
点开始》运行》services.msc打开服务窗口
启动zabbix anget服务