linux-2.6.29 s3c6410 reboot实现

计4968

S3C6410 BSP驱动默认并未实现reboot机制，reboot的底层驱动实现接口为arch_reset, 该函数在system.h中实现。
实现方式可参考UBOOT中的实现：

.globl reset_cpu
reset_cpu:
ldr     r1, =ELFIN_CLOCK_POWER_BASE
ldr     r2, [r1, #SYS_ID_OFFSET]
ldr     r3, =0xffff
and     r2, r3, r2, lsr #12
str     r2, [r1, #SW_RST_OFFSET]
_loop_forever:
b       _loop_forever


也可以通过看门狗来复位：

static inline void arch_wdt_reset(void)
{
struct clk *wdtclk;
printk("arch_reset: attempting watchdog reset\n");
__raw_writel(0, S3C2410_WTCON);  /* disable watchdog, to be safe  */
wdtclk = clk_get(NULL, "watchdog");
if (!IS_ERR(wdtclk)) {
clk_enable(wdtclk);
} else
printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__);
/* put initial values into count and data */
__raw_writel(0x80, S3C2410_WTCNT);
__raw_writel(0x80, S3C2410_WTDAT);
/* set the watchdog to go and reset... */
__raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN |
S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON);
/* wait for reset to assert... */
mdelay(500);
printk(KERN_ERR "Watchdog reset failed to assert reset\n");
/* delay to allow the serial port to show the message */
mdelay(50);