#等待一组输入,每个单词之间使用空格隔开,直到回车结束,并分别将单词依次赋值给这三个读入变量。 /> read one two three 1 2 3 #在控制台输入1 2 3,它们之间用空格隔开。 /> echo "one = $one, two = $two, three = $three"
one = 1, two = 2, three = 3
/> read #等待控制台输入,并将结果赋值给特定内置变量REPLY。 This is REPLY #在控制台输入该行。 /> echo $REPLY #打印输出特定内置变量REPLY,以确认是否被正确赋值。
This is REPLY
/> read -p "Enter your name: " #输出"Enter your name: "文本提示,同时等待输入,并将结果赋值给REPLY。
Enter you name: stephen #在提示文本之后输入stephen /> echo $REPLY
stephen
#等待控制台输入,并将输入信息视为数组,赋值给数组变量friends,输入信息用空格隔开数组的每个元素 /> read -a friends Tim Tom Helen /> echo "I have ${#friends} friends"
I have 3 friends /> echo "They are ${friends[0]}, ${friends[1]} and ${friends[2]}."
They are Tim, Tom and Helen.
3. 流程控制语句: if语句格式如下:
#if语句的后面是Shell命令,如果该命令执行成功返回0,则执行then后面的命令。
if command
then
command
command
fi
#用test命令测试其后面expression的结果,如果为真,则执行then后面的命令。
if test expression
then
command
fi
#下面的格式和test expression等同
if [ string/numeric expression ]
then
command
fi
#下面的两种格式也可以用于判断语句的条件表达式,而且它们也是目前比较常用的两种。
if [[ string expression ]]
then
command
fi
if (( numeric expression )) #let表达式
then
command
fi
见如下示例: /> cat > test1.sh #从命令行直接编辑test1.sh文件。 echo -e "Are you OK(y/n)? \c" read answer #这里的$answer变量必须要用双引号扩住,否则判断将失败。当变量$answer等于y或Y时,支持下面的echo命令。 if [ "$answer" = y -o "$answer" = Y ] then echo "Glad to see it." fi CTRL+D /> . ./test1.sh
Are you OK(y/n)? y
Glad to see it.
上面的判断还可以替换为: /> cat > test2.sh echo -e "Are you OK(y/n or Maybe)? \c" read answer # [[ ]]复合命令操作符允许其中的表达式包含元字符,这里输入以y或Y开头的任意单词,或Maybe都执行then后面的echo。 if [[ $answer == [yY]* || $answer = Maybe ]] then echo "Glad to hear it. fi CTRL+D /> . ./test2.sh
Are you OK(y/n or Maybe)? yes
Glad to hear it.
下面的例子将使用Shell中的扩展通配模式。 /> shopt -s extglob #打开该扩展模式 /> answer="not really" /> if [[ $answer = [Nn]o?( way |t really) ]] > then > echo "I am sorry." > fi
I am sorry. 对于本示例中的扩展通配符,这里需要给出一个具体的解释。[Nn]o匹配No或no,?( way|t really)则表示0个或1个( way或t really),因此answer变量匹配的字符串为No、no、Not really、not really、No way、no way。 下面的示例使用了let命令操作符,如: /> cat > test3.sh if (( $# != 2 )) #等同于 [ $# -ne 2 ] then echo "Usage: $0 arg1 arg2" 1>&2 exit 1 #exit退出值为0-255之间,只有0表示成功。 fi if (( $1 < 0 || $1 > 30 )) #等同于 [ $1 -lt 0 -o $1 -gt 30 ] then echo "arg1 is out of range." exit 2 fi if (( $2 <= 20 )) #等同于 [ $2 -le 20 ] then echo "arg2 is out of range." fi CTRL+D /> sh ./test3.sh
Usage: ./test3.sh arg1 arg2 /> echo $? #Shell脚本的退出值为exit的参数值。
1 /> sh ./test3.sh 40 30
arg1 is out of range. /> echo $?
2 下面的示例为如何在if的条件表达式中检验空变量: /> cat > test4.sh if [ "$name" = "" ] #双引号就表示空字符串。 then echo "name is null." fi CTRL+D /> . ./test4.sh
name is null.
if/elif/else语句的使用方式和if语句极为相似,相信有编程经验的人都不会陌生,这里就不再赘述了,其格式如下:
if command
then
command
elif command
then
command
else
command
fi
见如下示例脚本: /> cat > test5.sh echo -e "How old are you? \c" read age if [ $age -lt 0 -o $age -gt 120 ] #等同于 (( age < 0 || age > 120 )) then echo "You are so old." elif [ $age -ge 0 -a $age -le 12 ] #等同于 (( age >= 0 && age <= 12 )) then echo "You are child." elif [ $age -ge 13 -a $age -le 19 ] #等同于 (( age >= 13 && age <= 19 )) then echo "You are 13--19 years old." elif [ $age -ge 20 -a $age -le 29 ] #等同于 (( age >= 20 && age <= 29 )) then echo "You are 20--29 years old." elif [ $age -ge 30 -a $age -le 39 ] #等同于 (( age >= 30 && age <= 39 )) then echo "You are 30--39 years old." else echo "You are above 40." fi CTRL+D /> . ./test5.sh
How old are you? 50
You are above 40.
case语句格式如下:
case variable in
value1)
command
;; #相同于C语言中case语句内的break。 value2)
command
;;
*) #相同于C语言中switch语句内的default
command
;;
esac
见如下示例脚本: /> cat > test6.sh #!/bin/sh echo -n "Choose a color: " read color case "$color" in [Bb]l??) echo "you select blue color." ;; [Gg]ree*) echo "you select green color." ;; red|orange) echo "you select red or orange." ;; *) echo "you select other color." ;; esac echo "Out of case command." /> . ./test6.sh
Choose a color: green
you select green color.
Out of case command.
4. 循环语句:
Bash Shell中主要提供了三种循环方式:for、while和until。 for循环声明格式:
for variable in word_list
do
command
done
见如下示例脚本: /> cat > test7.sh for score in math english physics chemist #for将循环读取in后面的单词列表,类似于Java的for-each。 do echo "score = $score" done echo "out of for loop" CTRL+D /> . ./test7.sh
score = math
score = english
score = physics
score = chemist
out of for loop
/> cat > mylist #构造数据文件 tom patty ann jake CTRL+D /> cat > test8.sh #!/bin/sh for person in $(cat mylist) #for将循环读取cat mylist命令的执行结果。 do echo "person = $person" done echo "out of for loop." CTRL+D /> . ./test8.sh
person = tom
person = patty
person = ann
person = jake
out of for loop.
/> cat > test9.sh for file in test[1-8].sh #for将读取test1-test8,后缀为.sh的文件 do if [ -f $file ] #判断文件在当前目录是否存在。 then echo "$file exists." fi done CTRL+D /> . ./test9.sh
test2.sh exists.
test3.sh exists.
test4.sh exists.
test5.sh exists.
test6.sh exists.
test7.sh exists.
test8.sh exists.
/> cat > test10.sh for name in $* #读取脚本的命令行参数数组,还可以写成for name的简化形式。 do echo "Hi, $name" done CTRL+D /> . ./test10.sh stephen ann
Hi, stephen
Hi, ann
while循环声明格式: while command #如果command命令的执行结果为0,或条件判断为真时,执行循环体内的命令。
do
command
done
见如下示例脚本: /> cat > test1.sh num=0 while (( num < 10 )) #等同于 [ $num -lt 10 ] do echo -n "$num " let num+=1 done echo -e "\nHere's out of loop." CTRL+D /> . ./test1.sh
0 1 2 3 4 5 6 7 8 9
Here's out of loop.
/> cat > test2.sh go=start echo Type q to quit. while [[ -n $go ]] #等同于[ -n "$go" ],如使用该风格,$go需要被双引号括起。 do echo -n How are you. read word if [[ $word == [Qq] ]] #等同于[ "$word" = Q -o "$word" = q ] then echo Bye. go= #将go变量的值置空。 fi done CTRL+D /> . ./test2.sh
How are you. Hi
How are you. q
Bye.
until循环声明格式: until command #其判断条件和while正好相反,即command返回非0,或条件为假时执行循环体内的命令。 do
command
done
见如下示例脚本: /> cat > test3.sh until who | grep stephen #循环体内的命令将被执行,直到stephen登录,即grep命令的返回值为0时才退出循环。 do sleep 1 echo "Stephen still doesn't login." done CTRL+D
shift命令声明格式:shift [n]
shift命令用来把脚本的位置参数列表向左移动指定的位数(n),如果shift没有参数,则将参数列表向左移动一位。一旦移位发生,被移出列表的参数就被永远删除了。通常在while循环中,shift用来读取列表中的参数变量。
见如下示例脚本: /> set stephen ann sheryl mark #设置4个参数变量。 /> shift #向左移动参数列表一次,将stephen移出参数列表。 /> echo $*
ann sheryl mark /> shift 2 #继续向左移动两位,将sheryl和ann移出参数列表 /> echo $*
mark /> shift 2 #继续向左移动两位,由于参数列表中只有mark了,因此本次移动失败。 /> echo $*
mark
/> cat > test4.sh while (( $# > 0 )) #等同于 [ $# -gt 0 ] do echo $* shift done CTRL+D /> . ./test4.sh a b c d e
a b c d e
b c d e
c d e
d e
e
break命令声明格式:break [n]
和C语言不同的是,Shell中break命令携带一个参数,即可以指定退出循环的层数。如果没有指定,其行为和C语言一样,即退出最内层循环。如果指定循环的层数,则退出指定层数的循环体。如果有3层嵌套循环,其中最外层的为1,中间的为2,最里面的是3。
见如下示例脚本: /> cat > test5.sh while true do echo -n "Are you ready to move on?" read answer if [[ $answer == [Yy] ]] then break else echo "Come on." fi done echo "Here we are." CTRL+D /> . ./test5.sh
Are you ready to move on? y
Here we are
continue命令声明格式:continue [n]
和C语言不同的是,Shell中continue命令携带一个参数,即可以跳转到指定层级的循环顶部。如果没有指定,其行为和C语言一样,即跳转到最内层循环的顶部。如果指定循环的层数,则跳转到指定层级循环的顶部。如果有3层嵌套循环,其中最外层的为3,中间的为2,最里面的是1。 /> cat maillist #测试数据文件maillist的内容为以下信息。
stephen
ann
sheryl
mark
/> cat > test6.sh for name in $(cat maillist) do if [[ $name == stephen ]]; then continue else echo "Hello, $name." fi done CTRL+D /> . ./test6.sh
Hello, ann.
Hello, sheryl.
Hello, mark.
/> cat > test8.sh for i in 9 7 2 3 5 4 do echo $i done | sort -n #直接将echo的输出通过管道重定向sort命令。 CTRL+D /> . ./test8.sh
2
3
4
5
7
9
5. IFS和循环:
Shell的内部域分隔符可以是空格、制表符和换行符。它可以作为命令的分隔符用在例如read、set和for等命令中。如果在列表中使用不同的分隔符,用户可以自己定义这个符号。在修改之前将IFS原始符号的值保存在另外一个变量中,这样在需要的时候还可以还原。
见如下示例脚本: /> cat > test9.sh names=Stephen:Ann:Sheryl:John #names变量包含的值用冒号分隔。 oldifs=$IFS #保留原有IFS到oldifs变量,便于后面的还原。 IFS=":" for friends in $names #这是遍历以冒号分隔的names变量值。 do echo Hi $friends done IFS=$oldifs #将IFS还原为原有的值。 set Jerry Tom Angela for classmates in $* #再以原有IFS的值变量参数列表。 do echo Hello $classmates done CTRL+D /> . ./test9.sh
Hi Stephen
Hi Ann
Hi Sheryl
Hi John
Hello Jerry
Hello Tom
Hello Angela
6. 函数:
Shell中函数的职能以及优势和C语言或其它开发语言基本相同,只是语法格式上的一些差异。下面是Shell中使用函数的一些基本规则:
1) 函数在使用前必须定义。
2) 函数在当前环境下运行,它和调用它的脚本共享变量,并通过位置参量传递参数。而该位置参量将仅限于该函数,不会影响到脚本的其它地方。
3) 通过local函数可以在函数内建立本地变量,该变量在出了函数的作用域之后将不在有效。
4) 函数中调用exit,也将退出整个脚本。
5) 函数中的return命令返回函数中最后一个命令的退出状态或给定的参数值,该参数值的范围是0-256之间。如果没有return命令,函数将返回最后一个Shell的退出值。
6) 如果函数保存在其它文件中,就必须通过source或dot命令把它们装入当前脚本。
7) 函数可以递归。
8) 将函数从Shell中清空需要执行:unset -f function_name。
9) 将函数输出到子Shell需要执行:export -f function_name。
10) 可以像捕捉Shell命令的返回值一样获取函数的返回值,如$(function_name)。
Shell中函数的声明格式如下: function function_name { command; command; }
见如下示例脚本: /> cat > test1.sh function increment() { #定义函数increment。 local sum #定义本地变量sum。 let "sum=$1+1" return $sum #返回值是sum的值。 } echo -n "The num is " increment 5 #increment函数调用。 echo $? #输出increment函数的返回值。 CTRL+D /> . ./test1.sh
The num is 6
7. 陷阱信号(trap):
在Shell程序运行的时候,可能收到各种信号,有的来自于操作系统,有的来自于键盘,而该Shell在收到信号后就立刻终止运行。但是在有些时候,你可能并不希望在信号到达时,程序就立刻停止运行并退出。而是他能希望忽略这个信号而一直在运行,或者在退出前作一些清除操作。trap命令就允许你控制你的程序在收到信号以后的行为。
其格式如下:
trap 'command; command' signal-number
trap 'command; command' signal-name
trap signal-number
trap signal-name
后面的两种形式主要用于信号复位,即恢复处理该信号的缺省行为。还需要说明的是,如果trap后面的命令是使用单引号括起来的,那么该命令只有在捕获到指定信号时才被执行。如果是双引号,则是在trap设置时就可以执行变量和命令替换了。
下面是系统给出的信号数字和信号名称的对照表:
1)SIGHUP 2)SIGINT 3)SIGQUIT 4)SIGILL 5)SIGTRAP 6)SIGABRT 7)SIGBUS 8)SIGFPE
9)SIGKILL 10) SIGUSR1 11)SIGEGV 12)SIGUSR2 13)SIGPIPE 14)SIGALRM 15)SIGTERM 17)SIGCHLD
18)SIGCONT 19)SIGSTOP ... ...
见如下示例脚本: /> trap 'rm tmp*;exit 1' 1 2 15 #该命令表示在收到信号1、2和15时,该脚本将先执行rm tmp*,然后exit 1退出脚本。 /> trap 2 #当收到信号2时,将恢复为以前的动作,即退出。 /> trap " " 1 2 #当收到信号1和2时,将忽略这两个信号。 /> trap - #表示恢复所有信号处理的原始值。 /> trap 'trap 2' 2 #在第一次收到信号2时,执行trap 2,这时将信号2的处理恢复为缺省模式。在收到信号2时,Shell程序退出。 /> cat > test2.sh trap 'echo "Control+C will not terminate $0."' 2 #捕获信号2,即在键盘上按CTRL+C。 trap 'echo "Control+\ will not terminate $0."' 3 #捕获信号3,即在键盘上按CTRL+\。 echo "Enter stop to quit shell." while true #无限循环。 do echo -n "Go Go...." read if [[ $REPLY == [Ss]top ]] #直到输入stop或Stop才退出循环和脚本。 then break fi done CTRL+D /> . ./test2.sh
Enter stop to quit shell.
Go Go....^CControl+C will not terminate -bash.
^\Control+\ will not terminate -bash. stop
8. 用getopts处理命令行选项:
这里的getopts命令和C语言中的getopt几乎是一致的,因为脚本的位置参量在有些时候是失效的,如ls -lrt等。这时候-ltr都会被保存在$1中,而我们实际需要的则是三个展开的选项,即-l、-r和-t。见如下带有getopts的示例脚本: /> cat > test3.sh #!/bin/sh while getopts xy options #x和y是合法的选项,并且将-x读入到变量options中,读入时会将x前面的横线去掉。 do case $options in x) echo "you entered -x as an option" ;; y) echo "you entered -y as an option" ;; esac done /> ./test3.sh -xy
you entered -x as an option
you entered -y as an option /> ./test3.sh -x
you entered -x as an option /> ./test3.sh -b #如果输入非法选项,getopts会把错误信息输出到标准错误。
./test3.sh: illegal option -- b /> ./test3.sh b #该命令不会有执行结果,因为b的前面有没横线,因此是非法选项,将会导致getopts停止处理并退出。
/> cat > test4.sh #!/bin/sh while getopts xy options 2>/dev/null #如果再出现选项错误的情况,该重定向会将错误输出到/dev/null。 do case $options in x) echo "you entered -x as an option" ;; y) echo "you entered -y as an option" ;; \?) echo "Only -x and -y are valid options" 1>&2 # ?表示所有错误的选项,即非-x和-y的选项。 esac done /> . ./test4.sh -g #遇到错误的选项将直接执行\?)内的代码。
Only -x and -y are valid options /> . ./test4.sh -xg
you entered -x as an option
Only -x and -y are valid options
/> cat > test5.sh #!/bin/sh while getopts xyz: arguments 2>/dev/null #z选项后面的冒号用于提示getopts,z选项后面必须有一个参数。 do case $arguments in x) echo "you entered -x as an option." ;; y) echo "you entered -y as an option." ;; z) echo "you entered -z as an option." #z的后面会紧跟一个参数,该参数保存在内置变量OPTARG中。 echo "\$OPTARG is $OPTARG."; ;; \?) echo "Usage opts4 [-xy] [-z argument]" exit 1 ;; esac done echo "The number of arguments passed was $(( $OPTIND - 1 ))" #OPTIND保存一下将被处理的选项的位置,他是永远比实际命令行参数多1的数。 /> ./test5.sh -xyz foo
you entered -x as an option.
you entered -y as an option.
you entered -z as an option.
$OPTARG is foo.
The number of arguments passed was 2 /> ./test5.sh -x -y -z boo
you entered -x as an option.
you entered -y as an option.
you entered -z as an option.
$OPTARG is boo.
The number of arguments passed was 4
9. eval命令与命令行解析:
eval命令可以对命令行求值,做Shell替换,并执行命令行,通常在普通命令行解析不能满足要求时使用。 /> set a b c d /> echo The last argument is \$$#
The last argument is $4 /> eval echo The last argument is \$$# #eval命令先进行了变量替换,之后再执行echo命令。
The last argument is d