aix 安装完出现： ctrmc Subsystem has been started. Subsystem PID....

86756

现像:
刚安装完的aix系统 , 设置root密码 后，到最后一步保存退出，出现:
0513-059 The ctrmc Subsystem has been started. Subsystem PID is 15484.
之后没有了反应。
强制重启后，出现:

Starting the sync daemon
Starting the error daemon
System initialization completed.
Setting tunable parameters...complete
Starting Multi-user Initialization
Performing auto-varyon of Volume Groups
Activating all paging spaces
0517-075 swapon: Paging device /dev/hd6 is already active.
/dev/rhd1 (/home): ** Unmounted cleanly - Check suppressed
/dev/rhd10opt (/opt): ** Unmounted cleanly - Check suppressed
Performing all automatic mounts
Multi-user initialization completed
0513-071 The ctcas Subsystem has been added.
0513-071 The ctrmc Subsystem has been added.
0513-001 The System Resource Controller daemon is not active.
Checking for srcmstr active...complete
Starting tcpip daemons:
0513-059 The syslogd Subsystem has been started. Subsystem PID is 11352.
0513-059 The sendmail Subsystem has been started. Subsystem PID is 11610.
0513-059 The portmap Subsystem has been started. Subsystem PID is 8030.
0513-059 The inetd Subsystem has been started. Subsystem PID is 9060.
0513-059 The snmpd Subsystem has been started. Subsystem PID is 9842.
0513-059 The hostmibd Subsystem has been started. Subsystem PID is 9660.
0513-059 The snmpmibd Subsystem has been started. Subsystem PID is 10434.
0513-059 The aixmibd Subsystem has been started. Subsystem PID is 10608.
Finished starting tcpip daemons.
Starting NFS services:
0513-059 The muxatmd Subsystem has been started. Subsystem PID is 14966.
0513-059 The biod Subsystem has been started. Subsystem PID is 11102.
0513-059 The rpc.lockd Subsystem has been started. Subsystem PID is 12142.
Completed NFS services.
0513-059 The ctrmc Subsystem has been started. Subsystem PID is 15484.


之前就一直卡在这里。没有可以登录的反应。


原因：
使用HMC安装完OS后，本地底层管理通过HMC 登录, 上层OS级管理通过telnet/ssh 登录。

系统启动后，s1端口会被操作系统用于其他功能，即被其他程序占用而无法login, 除非手动停掉相关程序，释放被占用的端口。

解决方法：

在没有显卡的情况下
1.从CD-ROM启动系统进入维护模式后，执行如下操作：


当屏幕上出现键盘图标或者信息后按下数字5键或者F5键（到底需要按数字 5还是F5键，各机型是不同的，具体情况下，要参考对应机型的服务指南 （service guide）），启动系统进入维护模式。

（1）选择 3 Start Maintenance Mode for System Recovery

（2）选择 1 Access a Root Volume Group

（3）选择 Select the volume group

（4）选择 1 Access this volume group and start a shell

2.设定终端环境变量（TERM），在命令行输入：

# export TERM=vt100

3.紧接着上一步，在命令行输入：

# smitty tty

在显示出的菜单里选择Change/Show Characteristics of a TTY这一行并按下回车键；

4.更改当前正在使用的这个终端设备的"runtime “和” login“属性，把”clocal”加进去：(这一步要手动添加进去，不要用F4选择)

STTY attributes for RUN time [hupcl,cread,brkint,icr,clocal> +

STTY attributes for LOGIN ---[hupcl,cread,echoe,cs8,clocal]

5.把光标移到菜单屏幕的最底部，用F4功能键更改对应行Apply change to DATABASE only的值为”yes"

Apply change to DATABASE only --yes ----x +

6.重新启动系统进入正常的工作模式