lvs+keepalive

xlfm22

1.安装LVS和Keepalived
#modprobe ip_vs    //内核加载ip_vs模块
#lsmod |grep ip_vs //看看加载是否成功
ip_vs                  78081  0
#uname -r
2.6.18-53.el5PAE
#ln -s /usr/src/kernels/2.6.18-53.el5PAE-i686/  /usr/src/linux //生成一个链接文件
如果/usr/src/kernels没有2.6.18-194.el5，则需要编译
#yum -y install kernel-devel
#yum -y update kernel
#cp /usr/src/kernels/2.6.18-274.el5/include/net/ip_vs.h        /usr/inclide/net/  //这个很重要，否则在安装ipvsadm的时候会提示缺少*.h文件
lvs安装
tar -xzvf ipvsadm-1.24.tar.gz
cd ipvsadm-1.24

make
出错
make[1]: *** [libipvs.o] 错误 1
make[1]: Leaving directory `/root/ipvsadm-1.24/libipvs'
make: *** [libs] 错误 2
解决
yum install libnl* popt*
make install
出现一些字样
install -m 0755 -s ipvsadm /sbin
install -m 0755 ipvsadm-save /sbin
install -m 0755 ipvsadm-restore /sbin
[ -d /usr/man/man8 ] || mkdir -p /usr/man/man8
install -m 0644 ipvsadm.8 /usr/man/man8
install -m 0644 ipvsadm-save.8 /usr/man/man8
install -m 0644 ipvsadm-restore.8 /usr/man/man8
if [ -d /etc/rc.d/init.d ]; then \
install -m 0755 ipvsadm.sh /etc/rc.d/init.d/ipvsadm; \
fi
表示成功
keepalived安装
#yum -y install openssl openssl-devel //安装keepalived需要
tar -xzvf keepalived-1.1.20.tar.gz
出现以下信息表示成
Keepalived configuration
------------------------
Keepalived version : 1.1.20
Compiler : gcc
Compiler flags : -g -O2
Extra Lib : -lpopt -lssl -lcrypto   
Use IPVS Framework : Yes
IPVS sync daemon support : Yes
Use VRRP Framework : Yes
Use Debug flags : No

#find / -name keepalived  # 查看keepalived位置               

#cp /usr/local/etc/rc.d/init.d/keepalived /etc/rc.d/init.d/
#cp /usr/local/etc/sysconfig/keepalived /etc/sysconfig/
#mkdir /etc/keepalived
#cp /usr/local/etc/keepalived/keepalived.conf /etc/keepalived/
#cp /usr/local/sbin/keepalived /usr/sbin/
#service keepalived start|stop     #做成系统启动服务方便管理.

需要自己编辑
配置LVS
在LVS机上配置（两台都要配置）
1． LVS-DR，配置LVS脚本实现负载均衡
#vi /usr/local/sbin/lvs-dr.sh
#!/bin/bash
# description: start LVS of DirectorServer
#Written by :NetSeek http://www.linuxtone.org

GW=61.164.122.1
# website director vip.
SNS_VIP=192.168.1.120
SNS_RIP1=192.168.1.110
SNS_RIP2=192.168.1.113

/etc/rc.d/init.d/functions

logger $0 called with $1

case "$1" in

start)
# set squid vip
/sbin/ipvsadm --set 30 5 60
/sbin/ifconfig eth0:0 $SNS_VIP broadcast $SNS_VIP netmask 255.255.255.255 broadcast $SNS_VIP up
/sbin/route add -host $SNS_VIP dev eth0:0
/sbin/ipvsadm -A -t $SNS_VIP:80 -s wrr -p 3
/sbin/ipvsadm -a -t $SNS_VIP:80 -r $SNS_RIP1:80 -g -w 1
/sbin/ipvsadm -a -t $SNS_VIP:80 -r $SNS_RIP2:80 -g -w 1
touch /var/lock/subsys/ipvsadm >/dev/null 2>&1

;;
stop)
/sbin/ipvsadm -C
/sbin/ipvsadm -Z
ifconfig eth0:0 down
route del $SNS_VIP
rm -rf /var/lock/subsys/ipvsadm >/dev/null 2>&1
echo "ipvsadm stoped"
;;

status)

if [ ! -e /var/lock/subsys/ipvsadm ];then
echo "ipvsadm stoped"
exit 1
else
echo "ipvsadm OK"
fi
;;

*)
echo "Usage: $0 {start|stop|status}"
exit 1
esac

exit 0

配置Realserver脚本

#vi /usr/local/sbin/realserver.sh
#!/bin/bash
# description: Config realserver lo and apply noarp
#Written by :NetSeek http://www.linuxtone.org

SNS_VIP=192.168.1.120

/etc/rc.d/init.d/functions

case "$1" in
start)
ifconfig lo:0 $SNS_VIP netmask 255.255.255.255 broadcast $SNS_VIP
/sbin/route add -host $SNS_VIP dev lo:0
echo "1" >/proc/sys/net/ipv4/conf/lo/arp_ignore
echo "2" >/proc/sys/net/ipv4/conf/lo/arp_announce
echo "1" >/proc/sys/net/ipv4/conf/all/arp_ignore
echo "2" >/proc/sys/net/ipv4/conf/all/arp_announce
sysctl -p >/dev/null 2>&1
echo "RealServer Start OK"

;;
stop)
ifconfig lo:0 down
route del $SNS_VIP >/dev/null 2>&1
echo "0" >/proc/sys/net/ipv4/conf/lo/arp_ignore
echo "0" >/proc/sys/net/ipv4/conf/lo/arp_announce
echo "0" >/proc/sys/net/ipv4/conf/all/arp_ignore
echo "0" >/proc/sys/net/ipv4/conf/all/arp_announce
echo "RealServer Stoped"
;;
*)
echo "Usage: $0 {start|stop}"
exit 1
esac

exit 0

或者采用secondary ip address方式配置
# vi /etc/sysctl.conf
net.ipv4.conf.lo.arp_ignore = 1
net.ipv4.conf.lo.arp_announce = 2
net.ipv4.conf.all.arp_ignore = 1
net.ipv4.conf.all.arp_announce = 2

#sysctl -p
#ip addr add 192.168.1.120/32 dev lo
#ip add list 查看是否绑定
3. 启动lvs-dr脚本和realserver启本，在DR上可以查看LVS当前状态:
#watch ipvsadm -ln

配置keeplive
vi /etc/keepalived/keepalived.conf
! Configuration File for keepalived

global_defs {
notification_email {
cnseek@gmail.com
}
notification_email_from sns-lvs@gmail.com
smtp_server 127.0.0.1
# smtp_connect_timeout 30
router_id LVS_DEVEL
}

# 20081013 written by :netseek
# VIP1
vrrp_instance VI_1 {
state MASTER             #备份服务器上将MASTER改为BACKUP   
interface eth0
virtual_router_id 51
priority 100    # 备份服务上将100改为99
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
61.164.122.8   
#(如果有多个VIP，继续换行填写.)
}
}

virtual_server 61.164.122.8 80 {
delay_loop 6                  #(每隔10秒查询realserver状态)
lb_algo wrr                  #(lvs 算法)
lb_kind DR                  #(Direct Route)
persistence_timeout 60        #(同一IP的连接60秒内被分配到同一台realserver)
protocol TCP                #(用TCP协议检查realserver状态)

real_server 61.164.122.9 80 {
weight 3               #(权重)
TCP_CHECK {
connect_timeout 10       #(10秒无响应超时)
nb_get_retry 3
delay_before_retry 3
connect_port 80
}
}
real_server 61.164.122.10 80 {
weight 3
TCP_CHECK {
connect_timeout 10
nb_get_retry 3
delay_before_retry 3
connect_port 80
}
}
}
＃ /usr/local/sbin/lvsdr.sh start （把这条语句写到/etc/rc.local中，开机启动）
＃/etc/init.d/keepalived start  启动keepalived 服务，keepalived就能利用keepalived.conf 配置文件，实现负载均衡和高可用.
#watch ipvsadm –ln


参考文章

http://bbs.linuxtone.org/thread-1077-1-1.html
http://31543.blog.iyunv.com/21543/110472/
http://nhylovezyh.blog.iyunv.com/1444948/666446