<plugin>
<groupId>${project.groupId}</groupId>
<artifactId>jmeter-maven-plugin</artifactId>
<version>${project.version}</version>
<!-- configure different executions of the plugin -->
<executions>
<execution>
<!--
1)
first test run warms up the webserver.
Used to fill caches.
With a different set of properties since it runs much shorter than a normal test
and also the rate of requests/second may be much lower.
Maybe also use a different URL set.
-->
<id>warmup</id>
<phase>integration-test</phase>
<goals>
<goal>jmeter</goal>
</goals>
<configuration>
<propertiesUser>
<!--Accesses urls for warmup (compiles JSPs, fills caches, ...)-->
<threadgroup00.name>warmup</threadgroup00.name>
<!--number of threads to use-->
<threadgroup00.numberOfThreads>1</threadgroup00.numberOfThreads>
<!--delay of the test in seconds-->
<threadgroup00.scheduledDelay>0</threadgroup00.scheduledDelay>
<!--duration of the test in seconds-->
<threadgroup00.scheduledDuration>30</threadgroup00.scheduledDuration>
<!--how long till all threads are up and running in seconds-->
<threadgroup00.rampUp>1</threadgroup00.rampUp>
<!--target throughput of all threads of the group per minute-->
<!-- <threadgroup00.throughput>100000000</threadgroup00.throughput>-->
<!-- use uris from given file -->
<!-- <threadgroup00.dataFile>${webapp.uris}</threadgroup00.dataFile> -->
</propertiesUser>
</configuration>
</execution>
<execution>
<!--
2) Performance test
-->
<id>test</id>
<phase>integration-test</phase>
<goals>
<goal>jmeter</goal>
</goals>
<configuration>
<propertiesUser>
<!--A user which accesses all URLs-->
<threadgroup00.name>posc</threadgroup00.name>
<!--number of threads to use-->
<threadgroup00.numberOfThreads>30</threadgroup00.numberOfThreads>
<!--number of loops-->
<threadgroup00.numberOfLoops>2</threadgroup00.numberOfLoops>
<!--delay of the test in seconds-->
<threadgroup00.scheduledDelay>0</threadgroup00.scheduledDelay>
<!--duration of the test in seconds-->
<threadgroup00.scheduledDuration>30</threadgroup00.scheduledDuration>
<!--how long till all threads are up and running in seconds-->
<threadgroup00.rampUp>2</threadgroup00.rampUp>
<!--target throughput of all threads of the group per minute-->
<!-- <threadgroup00.throughput>100000000</threadgroup00.throughput>-->
<!-- use uris from given file -->
<!-- <threadgroup00.dataFile>${webapp.uris}</threadgroup00.dataFile>-->
</propertiesUser>
</configuration>
</execution>
</executions>
<!-- general configuration for all executions -->
<configuration>
<!-- configure which testplans to use -->
<testFilesIncluded>
<testFilesIncluded>PoscPaymentServiceImplService.jmx</testFilesIncluded>
</testFilesIncluded>
<!-- protocol, server and port of tested webapp -->
<propertiesUser>
<protocol>${webapp.protocol}</protocol>
<server>${webapp.host}</server>
<port>${webapp.port}</port>
</propertiesUser>
</configuration>
</plugin>
<plugin>
<groupId>${project.groupId}</groupId>
<artifactId>jmeter-analysis-maven-plugin</artifactId>
<version>${jmeter.analysis.maven.plugin.version}</version>
<executions>
<execution>
<goals>
<goal>analyze</goal>
</goals>
<phase>post-integration-test</phase>
<configuration>
<!--
source file that contains jmeter result data. Needs to be XML format or a GZIPed XML format
-->
<source>${project.build.directory}/jmeter/results/PoscPaymentServiceImplService-120613.jtl</source>
<!--
directory where to store analysis report files. At least a file "summary.txt" will be stored here.
-->
<targetDirectory>${project.build.directory}/reports</targetDirectory>
<!--
Defines groups of requests by URL patterns,
e.g. URIs starting with /mock/page are associated with group "pages". All analysis results are
If there is no such mapping then the threadgroups from the jmeter.xml are used.
-->
<!--<requestGroups>-->
<!--<test>/en-US/firefox/**</test>-->
<!--</requestGroups>-->
<!--
If set to true, additional files "<category>-sizes.csv" and "<category>-durations.csv" will be stored.
These files contain detailed information for response size and response durations for every URI.
-->
<generateCSVs>true</generateCSVs>
<!--
If set to true, additional chart files "<category>-durations.png" will be created.
-->
<generateCharts>true</generateCharts>
<!-- The database configuration -->
<userName>xxx</userName>
<passWord>xxx</passWord>
<dataBase>xxx</dataBase>
<host>xxx.xxx.xxx.xxx:3306</host>
<!--
Mapping from resource URL to file name. Every resource will be downloaded and stored in 'targetDirectory'
with the given filename. Tokens "_FROM_" and "_TO_" can be used as placeholders. These placeholders will
be replaced by timestamps of execution interval (formatted as ISO8601, e.g. '20111216T145509+0100').
-->
<!--<remoteResources>-->
<!--<property>-->
<!--<name>http://yourhost/path?from=_FROM_&to=_TO_</name>-->
<!--<value>my_resource.txt</value>-->
<!--</property>-->
<!--</remoteResources>-->
</configuration>
</execution>
</executions>
</plugin>