centos6.4 安装xen

ter2w

安装xen
yum install -y centos-release-xen xen
安装虚拟化管理工具
yum install libvirt python-virtinst libvirt-daemon-xen   bridge-utils -y
重启，xen内核运行

虚拟机安装环境搭建：

1.配置桥接网络

[iyunv@localhost xen]# cat xend-config.sxp |egrep -v '(^#|^\ *$)'
(xend-unix-server yes)
(xend-relocation-server no)
(xend-relocation-hosts-allow '^localhost$ ^localhost\\.localdomain$')
(network-script /bin/true)
(vif-script vif-bridge)
(dom0-min-mem 256)
(enable-dom0-ballooning yes)
(total_available_memory 0)
(dom0-cpus 0)
(vncpasswd '')
修改为：

[iyunv@localhost xen]# cat xend-config.sxp |egrep -v '(^#|^\ *$)'
(xend-unix-server yes)
(xend-relocation-server no)
(xend-relocation-hosts-allow '^localhost$ ^localhost\\.localdomain$')
(network-script 'network-bridge bridge=xenbr1')
(network-script /bin/true)
(vif-script vif-bridge)
(dom0-min-mem 256)
(enable-dom0-ballooning yes)
(total_available_memory 0)
(dom0-cpus 0)
(vncpasswd '')
[iyunv@localhost xen]#
2.设置服务器启动

chkconfig libvirtd on
chkconfig libvirt-guest on
chkconfig libvirt-guests on

3.重启后：


[iyunv@localhost xen]# ifconfig
lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:928 errors:0 dropped:0 overruns:0 frame:0
          TX packets:928 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:36599055 (34.9 MiB)  TX bytes:36599055 (34.9 MiB)

peth0     Link encap:Ethernet  HWaddr 08:00:27:63:01:87  
          inet6 addr: fe80::a00:27ff:fe63:187/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:11196 errors:0 dropped:0 overruns:0 frame:0
          TX packets:6741 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:9413252 (8.9 MiB)  TX bytes:851189 (831.2 KiB)

vif2.0    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF  
          inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:25 errors:0 dropped:0 overruns:0 frame:0
          TX packets:255 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:32
          RX bytes:1028 (1.0 KiB)  TX bytes:19605 (19.1 KiB)

virbr0    Link encap:Ethernet  HWaddr A2:81:98:EC:A4:44  
          inet addr:192.168.122.1  Bcast:192.168.122.255  Mask:255.255.255.0
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

xenbr1    Link encap:Ethernet  HWaddr 08:00:27:63:01:87  
          inet addr:192.168.16.253  Bcast:0.0.0.0  Mask:255.255.255.0
          inet6 addr: fe80::a00:27ff:fe63:187/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:25135 errors:0 dropped:0 overruns:0 frame:0
          TX packets:26826 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:9837395 (9.3 MiB)  TX bytes:305790710 (291.6 MiB)

4.安装httpd，并且把镜像放到html下
yum install httpd
mkdir /var/www/html/iso
mount /dev/cdrom1 /var/www/html/iso/
service iptables stop
service httpd start
mkdir /xen

virt-install -n zyt_vm01 -r 512 --disk path=/xen/zyt_vm01.img,size=6  -l http://192.168.16.253/iso

cp一个虚拟机：
1.创建一个xen虚拟机配置文件
[iyunv@localhost xen]# cat xmexample1|egrep -v '(^#|^\ *$)'
kernel = "/boot/vmlinuz-2.6.10-xenU"
memory = 64
name = "ExampleDomain"
vif = [ '' ]
disk = [ 'phy:hda1,hda1,w' ]
root = "/dev/hda1 ro"
extra = "4"
[iyunv@localhost xen]# cat xmexample1|egrep -v '(^#|^\ *$)'>zyt_vm02
[iyunv@localhost xen]# vi zyt_vm02
[iyunv@localhost xen]# cat zyt_vm02
#kernel = "/boot/vmlinuz-2.6.10-xenU"
memory = 512
name = "zyt_vm02"
vif = [ 'bridge=xenbr1' ]
disk = [ 'file:/xen/zyt_vm02.img,xvda,w' ]
#root = "/dev/hda1 ro"
#extra = "4"
[iyunv@localhost xen]#
2.cp镜像
[iyunv@localhost ~]# cd /xen/
[iyunv@localhost xen]# ll
total 1516148
-rwxr-xr-x. 1 root root 6442450944 Mar  6 05:01 zyt_vm01.img
[iyunv@localhost xen]# cp zyt_vm01.img zyt_vm02.img
[iyunv@localhost xen]#

3.启动新的虚拟机
xm create -c zyt_vm02

4.进入后修改mac地址，主机名