docker 网络设置桥接网卡

mancha

yum  -y install  bridge-utils
[root@linux-node2 ~]# systemctl stop docker
[root@linux-node2 ~]# ifconfig  docker0 down
[root@linux-node2 ~]# brctl delbr  docker0
[root@linux-node2 network-scripts]# cat ifcfg-br0
DEVICE=br0
ONBOOT=yes
NM_CONTROLLED=no
BOOTPROTO=static
TYPE=Bridge
IPADDR=192.168.56.12
NETMASK=255.255.255.0
GATEWAY=192.168.56.2
[root@linux-node2 network-scripts]# cat ifcfg-eth0
TYPE=Ethernet
BOOTPROTO=none
IPV6INIT=no
NAME=eth0
DEVICE=eth0
ONBOOT=yes
BRIDGE=br0
[root@linux-node2 network-scripts]#
systemctl restart network
[root@linux-node2 network-scripts]# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master br0 state UP qlen 1000
    link/ether 00:0c:29:ac:7e:6d brd ff:ff:ff:ff:ff:ff
    inet6 fe80::20c:29ff:feac:7e6d/64 scope link
       valid_lft forever preferred_lft forever
6: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP qlen 1000
    link/ether 00:0c:29:ac:7e:6d brd ff:ff:ff:ff:ff:ff
    inet 192.168.56.12/24 brd 192.168.56.255 scope global br0
       valid_lft forever preferred_lft forever
    inet6 fe80::20c:29ff:feac:7e6d/64 scope link
       valid_lft forever preferred_lft forever
[root@linux-node2 network-scripts]#

vi  /etc/sysconfig/docker
OPTIONS='--selinux-enabled --log-driver=journald --signature-verification=false -b=br0'
systemctl restart  network
pipework的安装
wget https://github.com/jpetazzo/pipework/archive/master.zip
unzip master.zip
cp pipework-master/pipework  /usr/local/bin/
chmod +x /usr/local/bin/pipework
这里最好不要让docker自动获取ip，下次启动会有变化而且自动获取的ip可能会和物理网段中的ip冲突
docker run -itd --net=none --name=test centos7 /bin/bash
为test容器设置一个与桥接物理网络同地址段的ip@网关
pipework br0 test 192.168.56.11/24@192.168.56.2