用dockerfile配置生成docker image并实现容器部署

tanggang1740

　　前言：
　　       docker有个dockerfile 是什么东西，为什么我们要用他？
　　

　　简单的说：  以前咱们docker run创建一个docker容器，有时候会附带不少的参数。
　　

　　比如:
docker run -d -p 22 -p 8080:8080 ruifengyun/ubunt-redis "redis-server redis.conf && /usr/sbin/sshd -D"　　

　　会发现很是麻烦。  这个时候咱们可以创建编辑一个dockerfile文件，生成新的image，然后从这个新的镜像创建容器，容器里面相关联的启动项和端口，目录都是提前定义好的。
　　原文： http://rfyiamcool.blog.51cto.com/1030776/1541081
　　cat Dockerfile
#配置redis
FROM ubuntu
MAINTAINER ruifengyun "ruifengyun@qq.com"
ADD ./start.sh  /root/start.sh
RUN apt-get update
RUN apt-get install -y redis-server
RUN apt-get install -y openssh-server
#CMD redis-server /etc/redis/redis.conf && /usr/sbin/sshd -D
CMD ["redis-server","/etc/redis/redis.conf"]
EXPOSE 6379
EXPOSE 22　　

　　FROM   是作为镜像的基础

　　RUN    可以理解为在FROM下来的镜像做一些环境的部署。
　　CMD    是创建容器后，会运行的命令
　　EXPOSE 是暴露的端口
　　MAINTAINER 通知的邮件
　　ADD    相当于把主机的start.sh脚本传递给了容器里面。
　　VOLUME  是本地的路径的映射
　　WORKDIR 是执行的路径，也就是cmd entrypoint执行的路径。
root@dev-ops:/var/4# docker build -t rui Dockerfile
Uploading context 2.048 kB
Uploading context
2014/08/16 09:50:59 Error: open /tmp/docker-build829651796/Dockerfile: not a directory
root@dev-ops:/var/4# docker build -t rui/redis .
Uploading context 2.56 kB
Uploading context
Step 0 : FROM ubuntu
---> c4ff7513909d
Step 1 : MAINTAINER Victor Coisne victor.coisne@dotcloud.com
---> Using cache
---> bbe0c91632f1
Step 2 : RUN apt-get update
---> Running in b10a1a60dcb3
Ign http://archive.ubuntu.com trusty InRelease
Ign http://archive.ubuntu.com trusty-updates InRelease
Ign http://archive.ubuntu.com trusty-security InRelease
Get:1 http://archive.ubuntu.com trusty Release.gpg [933 B]
Get:2 http://archive.ubuntu.com trusty-updates Release.gpg [933 B]
Get:3 http://archive.ubuntu.com trusty-security Release.gpg [933 B]
Get:4 http://archive.ubuntu.com trusty Release [58.5 kB]
Get:5 http://archive.ubuntu.com trusty-updates Release [59.7 kB]
Get:6 http://archive.ubuntu.com trusty-security Release [59.7 kB]
Get:7 http://archive.ubuntu.com trusty/main Sources [1335 kB]
Get:8 http://archive.ubuntu.com trusty/restricted Sources [5335 B]
Get:9 http://archive.ubuntu.com trusty/universe Sources [7926 kB]
Get:10 http://archive.ubuntu.com trusty/main amd64 Packages [1743 kB]
Get:11 http://archive.ubuntu.com trusty/restricted amd64 Packages [16.0 kB]
Get:12 http://archive.ubuntu.com trusty/universe amd64 Packages [7589 kB]
Get:13 http://archive.ubuntu.com trusty-updates/main Sources [138 kB]
Get:14 http://archive.ubuntu.com trusty-updates/restricted Sources [1250 B]
Get:15 http://archive.ubuntu.com trusty-updates/universe Sources [91.7 kB]
Get:16 http://archive.ubuntu.com trusty-updates/main amd64 Packages [375 kB]
Get:17 http://archive.ubuntu.com trusty-updates/restricted amd64 Packages [6341 B]
Get:18 http://archive.ubuntu.com trusty-updates/universe amd64 Packages [235 kB]
Get:19 http://archive.ubuntu.com trusty-security/main Sources [47.4 kB]
Get:20 http://archive.ubuntu.com trusty-security/restricted Sources [40 B]
Get:21 http://archive.ubuntu.com trusty-security/universe Sources [11.9 kB]
Get:22 http://archive.ubuntu.com trusty-security/main amd64 Packages [167 kB]
Get:23 http://archive.ubuntu.com trusty-security/restricted amd64 Packages [40 B]
Get:24 http://archive.ubuntu.com trusty-security/universe amd64 Packages [57.0 kB]
Fetched 19.9 MB in 11min 48s (28.1 kB/s)
Reading package lists...
---> 9ce87ae24eeb
Step 3 : RUN apt-get install -y redis-server
---> Running in b28a88665c3f
Reading package lists...
Building dependency tree...
Reading state information...
The following extra packages will be installed:
  libjemalloc1 redis-tools
The following NEW packages will be installed:
  libjemalloc1 redis-server redis-tools
0 upgraded, 3 newly installed, 0 to remove and 3 not upgraded.
Need to get 410 kB of archives.
After this operation, 1272 kB of additional disk space will be used.
Get:1 http://archive.ubuntu.com/ubuntu/ trusty/universe libjemalloc1 amd64 3.5.1-2 [76.8 kB]
Get:2 http://archive.ubuntu.com/ubuntu/ trusty/universe redis-tools amd64 2:2.8.4-2 [65.7 kB]
Get:3 http://archive.ubuntu.com/ubuntu/ trusty/universe redis-server amd64 2:2.8.4-2 [267 kB]
debconf: unable to initialize frontend: Dialog
debconf: (TERM is not set, so the dialog frontend is not usable.)
debconf: falling back to frontend: Readline
debconf: unable to initialize frontend: Readline
debconf: (This frontend requires a controlling tty.)
debconf: falling back to frontend: Teletype
dpkg-preconfigure: unable to re-open stdin:
Fetched 410 kB in 4s (91.4 kB/s)
Selecting previously unselected package libjemalloc1.
(Reading database ... 11518 files and directories currently installed.)
Preparing to unpack .../libjemalloc1_3.5.1-2_amd64.deb ...
Unpacking libjemalloc1 (3.5.1-2) ...
Selecting previously unselected package redis-tools.
Preparing to unpack .../redis-tools_2%3a2.8.4-2_amd64.deb ...
Unpacking redis-tools (2:2.8.4-2) ...
Selecting previously unselected package redis-server.
Preparing to unpack .../redis-server_2%3a2.8.4-2_amd64.deb ...
Unpacking redis-server (2:2.8.4-2) ...
Processing triggers for ureadahead (0.100.0-16) ...
Setting up libjemalloc1 (3.5.1-2) ...
Setting up redis-tools (2:2.8.4-2) ...
Setting up redis-server (2:2.8.4-2) ...
invoke-rc.d: policy-rc.d denied execution of start.
Processing triggers for libc-bin (2.19-0ubuntu6.1) ...
Processing triggers for ureadahead (0.100.0-16) ...
---> d37fb2bbe0b5
Step 4 : ENTRYPOINT redis-server /etc/redis/redis.conf && /usr/sbin/sshd -D
---> Running in f6c027ac643d
---> ec7fe19bdfed
Step 5 : USER daemon
---> Running in 0e3b10d07a16
---> d16398d08a4a
Step 6 : EXPOSE 6379
---> Running in c8ca52dde189
---> e0a9bcb25972
Step 7 : EXPOSE 22
---> Running in 22845a6abd90
---> 54bb130c7a44
Successfully built 54bb130c7a44
Removing intermediate container b10a1a60dcb3
Removing intermediate container b28a88665c3f
Removing intermediate container f6c027ac643d
Removing intermediate container 0e3b10d07a16
Removing intermediate container c8ca52dde189
Removing intermediate container 22845a6abd90
root@dev-ops:/var/4#
原文： http://rfyiamcool.blog.51cto.com/1030776/1541081　　

　　等折腾完了后，他会生成一个镜像 。 这个镜像是由咱们的dockerfile搞的。
　　
　　原文： http://rfyiamcool.blog.51cto.com/1030776/1541081
　　这次咱们再创建容器，不用再加那么多参数了。
root@dev-ops:~# docker run -d -P rui
116b30b056493237caca158849ae687c9beb4f8656be485c2a3cc71a27d8e951
root@dev-ops:~#
root@dev-ops:~#
root@dev-ops:~# docker ps -a
CONTAINER ID        IMAGE                           COMMAND                CREATED             STATUS              PORTS                      NAMES
116b30b05649        rui:latest                      redis-server /etc/redis/redis.conf    4 seconds ago       Up 3 seconds        0.0.0.0:49153->6379/tcp   nostalgic_lumiere　　

　　咱们再来一个比较全的dockerfile例子:
　　功能是用来部署lnmp和wordpress  ，配置看起来多 ，其实还是比较规范的。
　　

原文： http://rfyiamcool.blog.51cto.com/1030776/1541081
FROM ubuntu:14.04
MAINTAINER liudehua <liudehua@xxx.com>
# Keep upstart from complaining
RUN dpkg-divert --local --rename --add /sbin/initctl
RUN ln -sf /bin/true /sbin/initctl
# Let the conatiner know that there is no tty
ENV DEBIAN_FRONTEND noninteractive
RUN apt-get update
RUN apt-get -y upgrade
# Basic Requirements
RUN apt-get -y install mysql-server mysql-client nginx php5-fpm php5-mysql php-apc pwgen python-setuptools curl git unzip
# Wordpress Requirements
RUN apt-get -y install php5-curl php5-gd php5-intl php-pear php5-imagick php5-imap php5-mcrypt php5-memcache php5-ming php5-ps php5-pspell php5-recode php5-sqlite php5-tidy php5-xmlrpc php5-xsl
# mysql config
RUN sed -i -e"s/^bind-address\s*=\s*127.0.0.1/bind-address = 0.0.0.0/" /etc/mysql/my.cnf
# nginx config
RUN sed -i -e"s/keepalive_timeout\s*65/keepalive_timeout 2/" /etc/nginx/nginx.conf
RUN sed -i -e"s/keepalive_timeout 2/keepalive_timeout 2;\n\tclient_max_body_size 100m/" /etc/nginx/nginx.conf
RUN echo "daemon off;" >> /etc/nginx/nginx.conf
# php-fpm config
RUN sed -i -e "s/;cgi.fix_pathinfo=1/cgi.fix_pathinfo=0/g" /etc/php5/fpm/php.ini
RUN sed -i -e "s/upload_max_filesize\s*=\s*2M/upload_max_filesize = 100M/g" /etc/php5/fpm/php.ini
RUN sed -i -e "s/post_max_size\s*=\s*8M/post_max_size = 100M/g" /etc/php5/fpm/php.ini
RUN sed -i -e "s/;daemonize\s*=\s*yes/daemonize = no/g" /etc/php5/fpm/php-fpm.conf
RUN sed -i -e "s/;catch_workers_output\s*=\s*yes/catch_workers_output = yes/g" /etc/php5/fpm/pool.d/www.conf
RUN find /etc/php5/cli/conf.d/ -name "*.ini" -exec sed -i -re 's/^(\s*)#(.*)/\1;\2/g' {} \;
# nginx site conf
ADD ./nginx-site.conf /etc/nginx/sites-available/default
# Supervisor Config
RUN /usr/bin/easy_install supervisor
RUN /usr/bin/easy_install supervisor-stdout
ADD ./supervisord.conf /etc/supervisord.conf
# Install Wordpress
ADD http://wordpress.org/latest.tar.gz /usr/share/nginx/latest.tar.gz
RUN cd /usr/share/nginx/ && tar xvf latest.tar.gz && rm latest.tar.gz
RUN mv /usr/share/nginx/html/5* /usr/share/nginx/wordpress
RUN rm -rf /usr/share/nginx/www
RUN mv /usr/share/nginx/wordpress /usr/share/nginx/www
RUN chown -R www-data:www-data /usr/share/nginx/www
# Wordpress Initialization and Startup Script
ADD ./start.sh /start.sh
RUN chmod 755 /start.sh
# private expose
EXPOSE 3306
EXPOSE 80
CMD ["/bin/bash", "/start.sh"]　　

　　再来一个mognodb的例子：
　　注： 可以用 \  标识换行
FROM dockerfile/ubuntu
# Install MongoDB.
RUN \
  apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv 7F0CEB10 && \
  echo 'deb http://downloads-distro.mongodb.org/repo/ubuntu-upstart dist 10gen' | tee /etc/apt/sources.list.d/mongodb.list && \
  apt-get update && \
  apt-get install -y mongodb-org && \
  mkdir -p /data/db
VOLUME ["/data"]
WORKDIR /data
CMD ["mongod"]
EXPOSE 27017
EXPOSE 28017　　

　　

　　官网有不少的例子,有兴趣的朋友可以到 https://github.com/dockerfile 查看下。
　　

　　在dockerfile使用cmd、entrypoint 需要注意：
　　

　　cmd 是可以写成shell的模式， 也就是 咱们平时写语句那样
　　CMD  redis-server redis.conf && service sshd restart
　　

　　docker调用它的时候是用/bin/sh -c 调用的。  这个时候有些少许的问题，大家再测试的时候，最好在自己的本机也测一般。  sh -c 这东西挺奇妙的 ，貌似他的参数断句有问题，有些蛋疼。
　　

　　一般来说，在用cmd启动的时候  用exec的模式多点 ，也就是 ['redis-server','/etc/redis/redis.conf'] 他自己会用空格组成一条命令。  
　　

　　一个dockerfile里面只能有一个CMD。 写多了没用。