设为首页 收藏本站
查看: 975|回复: 0

[经验分享] 如何修改Outlook2013/2016的OST文件存储路径

[复制链接]

尚未签到

发表于 2018-6-25 06:33:23 | 显示全部楼层 |阅读模式
  PS:Outlook2016设置方法类同
  To set the default location of an outlook data file you have to make a registry change. Once you make the change, anytime you create a new data file, Outlook will put the data file in that new location.
  These instructions will work in prior versions of office as well but the path to the office key will be slightly different.
Change Default Data File Location in Outlook
  1) Start - Regedit - Double-Click Regedit - Accept the Elevation Prompt - Drill Down / Navigate To: Computer\HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Outlook
DSC0000.jpg

  2) Right-Click Outlook Select New then String Value
  3) Type “ForceOSTPath” without the quotes for the variable name and press Enter then Double-ClickForceOSTPath to Edit the string
  4) Type the location you want your data files to use. In my case it was D:\_Profile\Mail
  5) Click OK {You can close Registry Editor now}  You will need to close Outlook in order for Outlook to use this new setting. Now when you create a new OST data file Outlook will put it in the new location. Close Outlook and move any .PST files to the new location if you like.
Move your OST to the new location…
  Unfortunately to use the new location for your existing accounts, you will need to create a new profile. When a profile is created, it saves the default location :( To utilize the new location for the OST’s you need to let outlook recreate them.
  6) Start - Control Panel - View By small Icons/ - Mail (on Windows 8 you can also get there by just clicking Start - Type Mail - Click Settings - Click Mail)
DSC0001.jpg

  This screenshot is Windows 8 but Windows 7 will be very similar Now we will create a new profile and let the OST be rebuilt.
  7) Click Add, Type in the Name you would like to give the profile (in my case I used “Dan Stolts”) then click OK
DSC0002.jpg

  This will start the Auto account Setup wizard
  8) Setup your first email account (Exchange or ActiveSync) by filling out your name, email address and password.
DSC0003.jpg

  The account setup should be fully automated.
DSC0004.jpg

  Notice if you like you can change the account settings or add another account from the wizard. just click Finish to complete this account setup.
  9) We need to set the new profile to be the default.  Do this by clicking the dropdown for “Always use this profile” and select the one we just created.
  10) Cleanup - you can now delete the old profile if you like. Deleting the profile will not remove the data files. You will have to go back and do that manually. By default the old data files were at %USERPROFILE%\Local Settings\Application Data\Microsoft\Outlook (in my case that was: C:\Users\dstolts\Local Settings\Application Data\Microsoft\Outlook)
  If you want to see the change you can drill down to the outlook data file settings from the mail control panel app Profile - Properties - Data files - Settings - Outlook Data File Settings
DSC0005.jpg

  You can also get the information from the Account settings screen. Profile - Properties - Email Accounts- E-Mail Tab- Click the account and the location of the data file will be listed.
DSC0006.jpg

  You can now go ahead and create additional accounts if needed.
  If you want to copy the old OST file you can copy it to the new location as long as it is not in use. If it is in use, try closing any apps that might have it open. If that fails try restarting your computer and not running outlook until after you create the new profile. I have not personally tried this so let me know if you have success. This may save you some time downloading a large mailbox.
  Tip: If you find the OST is still put in the %USERPROFILE%\Local Settings\Application Data\Microsoft\Outlook folder it is likely because there is already an .OST file of the same name in the destination folder. Try moving it somewhere else. You can try copying it back once the account is successfully setup.
  原文地址:
  http://blogs.technet.com/b/danstolts/archive/2012/11/07/how_2d00_to_2d00_change_2d00_default_2d00_data_2d00_file_2d00_ost_2d00_location_2d00_in_2d00_office_2d00_2013.aspx

运维网声明 1、欢迎大家加入本站运维交流群:群②:261659950 群⑤:202807635 群⑦870801961 群⑧679858003
2、本站所有主题由该帖子作者发表,该帖子作者与运维网享有帖子相关版权
3、所有作品的著作权均归原作者享有,请您和我们一样尊重他人的著作权等合法权益。如果您对作品感到满意,请购买正版
4、禁止制作、复制、发布和传播具有反动、淫秽、色情、暴力、凶杀等内容的信息,一经发现立即删除。若您因此触犯法律,一切后果自负,我们对此不承担任何责任
5、所有资源均系网友上传或者通过网络收集,我们仅提供一个展示、介绍、观摩学习的平台,我们不对其内容的准确性、可靠性、正当性、安全性、合法性等负责,亦不承担任何法律责任
6、所有作品仅供您个人学习、研究或欣赏,不得用于商业或者其他用途,否则,一切后果均由您自己承担,我们对此不承担任何法律责任
7、如涉及侵犯版权等问题,请您及时通知我们,我们将立即采取措施予以解决
8、联系人Email:admin@iyunv.com 网址:www.yunweiku.com

所有资源均系网友上传或者通过网络收集,我们仅提供一个展示、介绍、观摩学习的平台,我们不对其承担任何法律责任,如涉及侵犯版权等问题,请您及时通知我们,我们将立即处理,联系人Email:kefu@iyunv.com,QQ:1061981298 本贴地址:https://www.yunweiku.com/thread-530258-1-1.html 上篇帖子: SQL Server 2016 Failover Cluster+ ALwaysOn(三) 下篇帖子: Csi Etabs 2016破解版
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

扫码加入运维网微信交流群X

扫码加入运维网微信交流群

扫描二维码加入运维网微信交流群,最新一手资源尽在官方微信交流群!快快加入我们吧...

扫描微信二维码查看详情

客服E-mail:kefu@iyunv.com 客服QQ:1061981298


QQ群⑦:运维网交流群⑦ QQ群⑧:运维网交流群⑧ k8s群:运维网kubernetes交流群


提醒:禁止发布任何违反国家法律、法规的言论与图片等内容;本站内容均来自个人观点与网络等信息,非本站认同之观点.


本站大部分资源是网友从网上搜集分享而来,其版权均归原作者及其网站所有,我们尊重他人的合法权益,如有内容侵犯您的合法权益,请及时与我们联系进行核实删除!



合作伙伴: 青云cloud

快速回复 返回顶部 返回列表