Cisco 2960配置文档

q968

　　Switch>en
　　Switch#conf t
　　Enter configuration commands, one per line. End with CNTL/Z.
　　Switch(config)#hostname CETSFIS-F-CS2960-1C-33
　　CETSFIS-F-CS2960-1C-33(config)#exit
　　CETSFIS-F-CS2960-1C-33#vlan data
　　% Warning: It is recommended to configure VLAN from config mode,
　　as VLAN database mode is being deprecated. Please consult user
　　documentation for configuring VTP/VLAN in config mode.
　　CETSFIS-F-CS2960-1C-33(vlan)#vlan 100 name Management-VLAN
　　VLAN 100 added:
　　Name: Management-VLAN
　　CETSFIS-F-CS2960-1C-33(vlan)#vlan 2 name CET-C
　　VLAN 2 added:
　　Name: CET-C
　　CETSFIS-F-CS2960-1C-33(vlan)#vlan 4 name CET-E
　　VLAN 4 added:
　　Name: CET-E
　　CETSFIS-F-CS2960-1C-33(vlan)#vlan 34 name Area-F
　　VLAN 34 added:
　　Name: Area-F
　　CETSFIS-F-CS2960-1C-33(vlan)#exit
　　APPLY completed.
　　Exiting....
　　CETSFIS-F-CS2960-1C-33#conf t
　　CETSFIS-F-CS2960-1C-3(config)#int vlan 1
　　CETSFIS-F-CS2960-1(config-if)#shutdown
　　CETSFIS-F-CS2960-1(config-if)#int vlan 100
　　CETSFIS-F-CS2960-1(config-if)#no shutdown
　　CETSFIS-F-CS2960-1(config-if)#ip address 10.114.0.33 255.255.255.0
　　CETSFIS-F-CS2960-1(config-if)#exit
　　CETSFIS-F-CS2960-1C-3(config)#ip default-gateway 10.114.0.254
　　CETSFIS-F-CS2960-1C-3(config)#interface rang gi0/1 -2
　　CETSFIS-F-CS(config-if-range)#switchport mode trunk
　　CETSFIS-F-CS(config-if-range)#interface rang fa0/1 -48
　　CETSFIS-F-CS(config-if-range)#switchport mode access
　　CETSFIS-F-CS(config-if-range)#switchport access vlan 34
　　CETSFIS-F-CS(config-if-range)#spanning-tree portfast
　　%Warning: portfast should only be enabled on ports connected to a single
　　host. Connecting hubs, concentrators, switches, bridges, etc... to this
　　interface when portfast is enabled, can cause temporary bridging loops.
　　Use with CAUTION
　　%Portfast will be configured in 48 interfaces due to the range command
　　but will only have effect when the interfaces are in a non-trunking mode.
　　CETSFIS-F-CS(config-if-range)#exit
　　CETSFIS-F-CS2960-1C-3(config)#vtp domain SFIS
　　Changing VTP domain name from NULL to SFIS
　　CETSFIS-F-CS2960-1C-3(config)#vtp mode transparent
　　Setting device to VTP TRANSPARENT mode.
　　CETSFIS-F-CS2960-1C-3(config)#snmp-server community netteam ro
　　CETSFIS-F-CS2960-1C-3(config)#snmp-server community netteam%123 rw
　　CETSFIS-F-CS2960-1C-3(config)#logging 10.114.5.88
　　CETSFIS-F-CS2960-1C-3(config)#service timestamps log datetime localtime
　　CETSFIS-F-CS2960-1C-3(config)#clock timezone gmt +8
　　CETSFIS-F-CS2960-1C-3(config)#ntp server 10.114.5.100
　　CETSFIS-F-CS2960-1C-3(config)#line vty 0 4
　　CETSFIS-F-CS2960(config-line)#password xxxxxxx
　　CETSFIS-F-CS2960(config-line)#login
　　CETSFIS-F-CS2960(config-line)#exit
　　CETSFIS-F-CS2960-1C-3(config)#enable secret xxxxxxx
　　CETSFIS-F-CS2960-1C-3(config)#service password-encryption
　　CETSFIS-F-CS2960-1C-3(config)#end
　　CETSFIS-F-CS2960-1C-33#wr
　　CETSFIS-F-CS2960-1C-3(config)#line console 0
　　CETSFIS-F-CS2960(config-line)#logging synchronous