Cisco IP Phone 两种配置方式

banbanbai

　　
　　Router(config)#telephony-service setup ----开启ipPhone配置
　　--- Cisco IOS Telephony Services Setup ---
　　Do you want to setup DHCP service for your IP Phones? [yes/no]: yes ----配置DHCP
　　Configuring DHCP Pool for Cisco IOS Telephony Services :
　　IP network for telephony-service DHCP Pool:192.168.2.0
　　Subnet mask for DHCP network :255.255.255.0
　　TFTP Server IP address (Option 150) :192.168.2.1
　　Default Router for DHCP Pool :192.168.2.1
　　Do you want to start telephony-service setup? [yes/no]: yes ----开启电话语音
　　Configuring Cisco IOS Telephony Services :
　　Enter the IP source address for Cisco IOS Telephony Services :192.168.2.1
　　Enter the Skinny Port for Cisco IOS Telephony Services : [2000]: ----语音端口
　　How many IP phones do you want to configure : [0]: 2
　　Do you want dual-line extensions assigned to phones? [yes/no]: yes
　　What Language do you want on IP phones :
　　0 English
　　1 French
　　2 German
　　3 Russian
　　4 Spanish
　　5 Italian
　　6 Dutch
　　7 Norwegian
　　8 Portuguese
　　9 Danish
　　10 Swedish
　　11 Japanese
　　[0]: 0
　　Which Call Progress tone set do you want on IP phones :
　　0 United States
　　1 France
　　2 Germany
　　3 Russia
　　4 Spain
　　5 Italy
　　6 Netherlands
　　7 Norway
　　8 Portugal
　　9 UK
　　10 Denmark
　　11 Switzerland
　　12 Sweden
　　13 Austria
　　14 Canada
　　15 Japan
　　[0]: 0
　　What is the first extension number you want to configure : 800 ----电话分机号
　　Do you have Direct-Inward-Dial service for all your phones? [yes/no]: yes
　　Enter the full E.164 number for the first phone :888
　　Do you want to forward calls to a voice message service? [yes/no]: yes ----语音信箱
　　Enter extension or pilot number of the voice message service:899
　　Call forward No Answer Timeout : [18]:
　　Do you wish to change any of the above information? [yes/no]: no ----表示不修改了
　　CNF-FILES: Clock is not set or synchronized,
　　retaining old versionStamps
　　---- Setup completed config ---
　　Router(config)#
　　*Mar 1 00:23:46.743: %LINK-3-UPDOWN: Interface ephone_dsp DN 1.1, changed state to up
　　*Mar 1 00:23:46.747: %LINK-3-UPDOWN: Interface ephone_dsp DN 1.2, changed state to up
　　*Mar 1 00:23:46.747: %LINK-3-UPDOWN: Interface ephone_dsp DN 2.1, changed state to up
　　*Mar 1 00:23:46.751: %LINK-3-UPDOWN: Interface ephone_dsp DN 2.2, changed state to up
　　
　　
　　
　　
　　Router#show run
　　Building configuration...
　　!
　　ip dhcp pool ITS
　　network 192.168.2.0 255.255.255.0
　　option 150 ip 192.168.2.1
　　default-router 192.168.2.1
　　!
　　!
　　telephony-service
　　max-ephones 2
　　max-dn 2
　　ip source-address 192.168.2.1 port 2000
　　auto assign 1 to 2
　　create cnf-files version-stamp Jan 01 2002 00:00:00
　　dialplan-pattern 1 8.. extension-length 3
　　voicemail 899
　　max-conferences 4 gain -6
　　transfer-system full-consult
　　!
　　!
　　ephone-dn 1 dual-line
　　number 800
　　call-forward busy 899
　　call-forward noan 899 timeout 18
　　!
　　!
　　ephone-dn 2 dual-line
　　number 801
　　call-forward busy 899
　　call-forward noan 899 timeout 18
　　!
　　!
　　ephone 1
　　!
　　!
　　!
　　ephone 2
　　!
　　!
　　!
　　line con 0
　　line aux 0
　　line vty 0 4
　　!
　　!
　　end
　　Router#show telephony-service ?
　　admin Show telephony-service admin username and password
　　all Show telephony-service details
　　dial-peer Show telephony-service dialpeers
　　directory-entry Show telephony-service directory-entry
　　ephone Show ephone configuration
　　ephone-dn Show ephone-dn configuration
　　ephone-template Show ephone-template configuration
　　tftp-bindings Show telephony-service tftp-server bindings
　　voice-port Show telephony-service voice ports
　　| Output modifiers
　　<cr>
　　Router#show telephony-service
　　CONFIG (Version=3.3)
　　=====================
　　Version 3.3
　　Cisco CallManager Express
　　For on-line documentation please see:
　　www.cisco.com/univercd/cc/td/doc/product/access/ip_ph/ip_ks/index.htm
　　ip source-address 192.168.2.1 port 2000
　　max-ephones 2
　　max-dn 2
　　max-conferences 4 gain -6
　　dspfarm units 0
　　dspfarm transcode sessions 0
　　hunt-group report delay 1 hours
　　max-redirect 5
　　dialplan-pattern 1 8.. extension-length 3
　　voicemail 899
　　time-format 12
　　date-format mm-dd-yy
　　timezone 0 Greenwich Standard Time
　　keepalive 30
　　timeout interdigit 10
　　timeout busy 10
　　timeout ringing 180
　　caller-id name-only: enable
　　edit DN through Web: disabled.
　　edit TIME through web: disabled.
　　Log (table parameters):
　　max-size: 150
　　retain-timer: 15
　　create cnf-files version-stamp Jan 01 2002 00:00:00
　　transfer-system full-consult
　　auto assign 1 to 2
　　local directory service: enabled.
　　
　　第二种配置方式：
　　第1步 先配置DHCP:
　　r1(config)#ip dhcp pool CME
　　r1(dhcp-config)#network 192.168.1.0 /24
　　r1(dhcp-config)#?
　　DHCP pool configuration commands:
　　accounting Send Accounting Start/Stop messages
　　bootfile Boot file name

　　class Specify a DHCP>
　　client-identifier Client>　　client-name Client name
　　default-router Default routers
　　dns-server DNS servers
　　domain-name Domain name
　　exit Exit from DHCP pool configuration mode
　　hardware-address Client hardware address
　　host Client IP address and mask
　　import Programatically importing DHCP option parameters
　　lease Address lease time
　　netbios-name-server NetBIOS (WINS) name servers
　　netbios-node-type NetBIOS node type
　　network Network number and mask
　　next-server Next server in boot process
　　no Negate a command or set its defaults
　　option Raw DHCP options
　　origin Configure the origin of the pool

　　relay Function as a DHCP>　　subnet Subnet allocation commands
　　update Dynamic updates
　　utilization Configure various utilization parameters
　　vrf Associate this pool with a VRF
　　r1(dhcp-config)#default-router 192.168.1.1
　　r1(dhcp-config)#option 150 ip 192.168.1.1
　　r1(dhcp-config)#exit
　　第2步 配置telephony服务
　　r1(config)#telephony-service
　　r1(config-telephony)#max-ephones 2
　　r1(config-telephony)#max-dn 2
　　r1(config-telephony)#auto assign 3 to 4
　　r1(config-telephony)#ip source-address 192.168.1.1 port 2000
　　r1(config-telephony)#exit
　　第3步 配置ephone
　　r1(config)#ephone-dn 1
　　r1(config-ephone-dn)#number 111
　　r1(config-ephone-dn)#exit
　　r1(config)#ephone-dn 2
　　r1(config-ephone-dn)#number 112
　　r1(config-ephone-dn)#exit