Cisco OSPF NSSA区域配置

坏气十足

　　R3(config)#interface loo1
　　R3(config-if)#ip addre 10.1.0.3 255.255.255.255
　　R3(config-if)#interface s0/0
　　R3(config-if)#ip address 192.168.14.3 255.255.255.0
　　R3(config-if)#no shut
　　R3(config-if)#no cdp enable
　　R3(config-if)#interface f0/0
　　R3(config-if)#ip address 192.168.3.3 255.255.255.0
　　R3(config-if)#no shut
　　R3(config-if)#no cdp enable
　　R3(config-if)#exit
　　R3(config)#router ospf 1
　　R3(config-router)#network 192.168.14.0 0.0.0.255 area 1
　　R3(config-router)#area 1 nssa
　　R3(config-router)#redistribute rip ?
　　metric    Metric for redistributed routes
　　metric-type OSPF/IS-IS exterior metric type for redistributed routes
　　route-map  Route map reference
　　subnets   Consider subnets for redistribution into OSPF
　　tag     Set tag for routes redistributed into OSPF
　　<cr>
　　R3(config-router)#redistribute rip subnets
　　R3(config-router)#exit
　　R3(config)#router rip
　　R3(config-router)#version 2
　　R3(config-router)#re
　　R3(config-router)#redistribute ospf 1 ?
　　match   Redistribution of OSPF routes
　　metric   Metric for redistributed routes
　　route-map Route map reference
　　vrf    *** Routing/Forwarding Instance
　　<cr>
　　R3(config-router)#redistribute ospf 1 metric 15
　　R3(config-router)#network 192.168.3.0
　　R3(config-router)#end
　　R3#copy runn start