CCNA--LAB-9:cisco升级IOS的方法

sakko51150

　　Restricted Rights Legend
　　Use, duplication, or disclosure by the Government is
　　subject to restrictions as set forth in subparagraph
　　(c) of the Commercial Computer Software - Restricted
　　Rights clause at FAR sec. 52.227-19 and subparagraph
　　(c) (1) (ii) of the Rights in Technical Data and Computer
　　Software clause at DFARS sec. 252.227-7013.
　　cisco Systems, Inc.
　　170 West Tasman Drive
　　San Jose, California 95134-1706
　　Cisco Internetwork Operating System Software

　　IOS (tm) C2600 Software (C2600-I-M), Version 11.3(6)T,>　　Copyright (c) 1986-1998 by cisco Systems, Inc.
　　Compiled Tue 06-Oct-98 18:42 by ccai
　　Image text-base: 0x80008084, data-base: 0x80554578
　　cisco 2610 (MPC860) processor (revision 0x202) with 12288K/4096K bytes of memory
　　.

　　Processor board>　　M860 processor: part number 0, mask 32
　　Bridging software.
　　X.25 software, Version 3.0.0.
　　1 Ethernet/IEEE 802.3 interface(s)
　　1 Serial network interface(s)
　　32K bytes of non-volatile configuration memory.
　　4096K bytes of processor board System flash (Read/Write)
　　Press RETURN to get started!
　　00:00:06: %LINK-3-UPDOWN: Interface Ethernet0/0, changed state to up
　　00:00:06: %LINK-3-UPDOWN: Interface Serial0/0, changed state to up
　　00:00:06: %SYS-5-CONFIG_I: Configured from memory by console
　　00:00:06: %SYS-5-RESTART: System restarted --
　　Cisco Internetwork Operating System Software

　　IOS (tm) C2600 Software (C2600-I-M), Version 11.3(6)T,>　　Copyright (c) 1986-1998 by cisco Systems, Inc.
　　Compiled Tue 06-Oct-98 18:42 by ccai
　　00:00:07: %LINEPROTO-5-UPDOWN: Line protocol on
　　WL_bank_2610_2>Interface Ethernet0/0, changed state to up
　　00:00:07: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, changed sta
　　te to up
　　00:00:07: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback0, changed sta
　　te to up
　　2610_2>        //