|
Promot Mode
{
User Mode:
Router>(input: enable)
Privilege Mode:
Router#(input:conf t)
Global Config Mode:
Router(config)#
----Ctrl-Z -> PM, Exit -> GCM
Interface:
Router(config-if)#
Sub-interface:
Router(config-subif)#
Controller:
Router(config-controller)#
Line:
Router(config-line)#
Router:
Router(config-router)#
IPX router :
Router(config-ipx-router)#
}
Command
{
1)privilege
enable //从用户模式进入特权模式
configure terminal //进入配置模式
hostname R1 //配置路由器的主机名为R1
login //用户要进入路由器,需要先进行登录
enable password yourpassword //配置进入特权模式的密码,密码不加密
enable secret yourpassword //配置进入特权模式的密码,密码加密
exit //退回到上一级模式
end //直接回到特权模式
sh run | append\begin\exclude\include\redirect\section\tee...
2)interface
show interface f0/0 //显示f0/0接口信息
interface f0/0 //进入f0/0接口
ip address 192.168.10.1 255.255.255.0 //配置接口的IP 地址
no shutdown //打开接口
3)router
no ip domain-lookup //路由器不使用DNS服务器解析主机的 IP 地址
logging synchonous //对路由器上的提示信息进行同步,防止信息干扰我们输入命令
no ip routing //关闭路由器的路由功能
ip default-gateway 10.1.14.254 //配置路由器访问其他网段时所需的网关
---Example:
R1>enable
R1#configure terminal
R1(config)#hostname AtoB
AtoB(config)#interface f0/0
AtoB(config-if)#ip address 192.168.10.1 255.255.255.0
AtoB(config-if)#no shutdown
AtoB(config-if)#end
R2>enable
R2#configure terminal
R2(config)#hostname BtoA
BtoA(config)#interface f0/0
BtoA(config-if)#ip address 192.168.10.2 255.255.255.0
BtoA(config-if)#no shutdown
BtoA(config-if)#end
---
PING
Sending 5, 100-byte ICMP Echos to 192.168.10.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 4/17/36 ms
4)IOS
show version //IOS版本信息
config-regiser 0x2101 //修改配置寄存器
show flash
copy run start
erase start
} |
|
|