Cisco Detector与Guard交互配置

xxggmmxx

　　1、在Guard 和Detector 上开启通讯服务
　　service wbm
　　service internode-comm
　　permit wbm *
　　permit ssh *
　　permit internode-comm *
　　2、在Detector上配置Guard 远程地址和生成key并将公钥发布到Guard上，配置与Linux下SSH远程对方不需要密码一样。
　　remote-guard ssh 10.10.10.146
　　admin@DETECTOR-conf#key generate     //自动生成Key
　　/root/.ssh/id_rsa already exists.
　　Overwrite (y/n)? y
　　Keys were successfuly generated. Please use "key publish" to update remote-guards
　　admin@DETECTOR-conf#key publish
　　*                   :  remote Guards to activate
　　<remote-guard-address>:  IP address in dotted-decimal notation (A.B.C.D)
　　admin@DETECTOR-conf#key publish *    //发布Key
　　The authenticity of host '10.10.10.146 (10.10.10.146)' can't be established.
　　RSA key fingerprint is b1:82:1a:da:18:5a:4f:3b:d3:bd:e2:bf:12:b1:31:69.
　　Are you sure you want to continue connecting (yes/no)? yes
　　riverhead@10.10.10.146's password:
　　Welcome to the blueway AGM
　　Unauthorized access is prohibited.
　　Contact yuanboling@hotmail.com for access.
　　Welcome to the blueway AGM
　　Unauthorized access is prohibited.
　　Contact yuanboling@hotmail.com for access.
　　Welcome to the blueway AGM
　　Unauthorized access is prohibited.
　　Contact yuanboling@hotmail.com for access.
　　admin@DETECTOR-conf#
　　3、测试验证
　　admin@DETECTOR#sync zone www.888jk.net local remote-guards
　　admin@DETECTOR#
　　或者使用web管理同意一下学习政策