设为首页 收藏本站
查看: 1023|回复: 0

[经验分享] Cisco 2821 VOIP 不支持30 channels in g729r8

[复制链接]

尚未签到

发表于 2018-7-20 13:21:16 | 显示全部楼层 |阅读模式
  问题描述:
  PBX 与voice gateway (Cisco 2821)通过E1连接,提供30路tie line,  开始使用正常,后来使用者增加了以后陆续出现拨号无任何反应等问题。
  环境:
  VG>show version
  Cisco IOS Software, 2800 Software (C2800NM-SPSERVICESK9-M), Version  12.3(11)
  RELEASE SOFTWARE (fc3)
  Technical Support: http://www.cisco.com/techsupport
  Copyright (c) 1986-2005 by Cisco Systems, Inc.
  Compiled Wed 05-Oct-05 23:39 by kehsiao

  ROM: System Bootstrap, Version 12.4(13r)T5,>  Sumida-CLab-VG uptime is 11 weeks, 5 days, 21 hours, 32 minutes
  System returned to ROM by power-on
  System image file is "flash:c2800nm-spservicesk9-mz.123-11.T8.bin"
  This product contains cryptographic features and is subject to United
  States and local country laws governing import, export, transfer and
  use. Delivery of Cisco cryptographic products does not imply
  third-party authority to import, export, distribute or use encryption.
  Importers, exporters, distributors and users are responsible for
  compliance with U.S. and local country laws. By using this product you
  agree to comply with applicable laws and regulations. If you are unable
  to comply with U.S. and local laws, return this product immediately.
  A summary of U.S. laws governing Cisco cryptographic products may be  found a
  http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
  If you require further assistance please contact us by sending email to
  export@cisco.com.
  Cisco 2821 (revision 53.50) with 249856K/12288K bytes of memory.

  Processor board>  2 Gigabit Ethernet interfaces
  1 Channelized E1/PRI port
  DRAM configuration is 64 bits wide with parity enabled.
  239K bytes of non-volatile configuration memory.
  62720K bytes of ATA CompactFlash (Read/Write)
  Configuration register is 0x2102
  VG>
  PBX Model:NEC IPX 2400
  VOIP 编码方式 codec g729r8 bytes 80
  原因:
  VG#show diag
  Slot 0:
  C2821 Motherboard with 2GE and integrated *** Port adapter, 2  ports
  Port adapter is analyzed
  Port adapter insertion time unknown
  EEPROM contents at hardware discovery:
  PCB Serial Number          : FOC11145XEQ
  Hardware Revision          : 1.0
  Top Assy. Part Number      : 800-26921-03
  Board Revision             : B0
  Deviation Number           : 0
  Fab Version                : 03
  RMA Test History           : 00
  RMA Number                 : 0-0-0-0
  RMA History                : 00
  Processor type             : 87
  Hardware date code         : 20070424
  Chassis Serial Number      : FHK1119F1ZR
  Chassis MAC Address        : 001b.d476.9958

  MAC Address block>  CLEI Code                  : COM7M00ARA
  Product (FRU) Number       : CISCO2821
  Part Number                : 73-8853-05

  Version>  EEPROM format version 4
  EEPROM contents (hex):
  0x00: 04 FF C1 8B 46 4F 43 31 31 31 34 35 58 45 51 40
  0x10: 03 E8 41 01 00 C0 46 03 20 00 69 29 03 42 42 30
  0x20: 88 00 00 00 00 02 03 03 00 81 00 00 00 00 04 00
  0x30: 09 87 83 01 32 40 18 C2 8B 46 48 4B 31 31 31 39
  0x40: 46 31 5A 52 C3 06 00 1B D4 76 99 58 43 00 20 C6
  0x50: 8A 43 4F 4D 37 4D 30 30 41 52 41 CB 8F 43 49 53
  0x60: 43 4F 32 38 32 31 20 20 20 20 20 20 82 49 22 95
  0x70: 05 89 56 30 34 00 D9 02 40 C1 FF FF FF FF FF FF
  PVDM Slot 0:
  32-channel (G.711) Voice/Fax PVDMII DSP SIMM PVDM daughter  card
  Hardware Revision          : 4.0
  Part Number                : 73-8539-05
  Board Revision             : A0
  Deviation Number           : 0
  Fab Version                : 04
  PCB Serial Number          : FOC10414WD8
  RMA Test History           : 00
  RMA Number                 : 0-0-0-0
  RMA History                : 00
  Processor type             : 00
  Product (FRU) Number       : PVDM2-32

  Version>  EEPROM format version 4
  EEPROM contents (hex):
  0x00: 04 FF 40 03 EE 41 04 00 82 49 21 5B 05 42 41 30
  0x10: 88 00 00 00 00 02 04 C1 8B 46 4F 43 31 30 34 31
  0x20: 34 57 44 38 03 00 81 00 00 00 00 04 00 09 00 CB
  0x30: 88 50 56 44 4D 32 2D 33 32 89 56 30 31 20 D9 02
  0x40: 40 C1 FF FF FF FF FF FF FF FF FF FF FF FF FF FF
  0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
  0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
  0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
  WIC Slot 0:
  E1 (1 port) Multi-Flex Trunk WAN daughter card
  Hardware revision 1.0             Board revision D0
  Serial number       31366350        Part number       800-04475-03
  Test history        0x0             RMA number       00-00-00
  Connector type      PCI
  EEPROM format version 1
  EEPROM contents (hex):
  0x20: 01 21 01 00 01 DE 9C CE 50 11 7B 03 00 00 00 00
  0x30: 68 00 00 00 03 12 26 00 FF FF FF FF FF FF FF FF
  VG#
  可以看出此vG 提供了一块 PVDM2-32 子卡。
  PVDMPacket Voice DSP Module (Cisco router feature)
  查询data sheet
  PVDM2-32 32-Channel Packet Fax/Voice DSP Module 2 DSPs (TI 2510)

  用户使用G.729时,pvdm2-32支持最大channel数为12 。
  解决方法:
  增加PVDM子卡,或者跟换支持更多channel的PVDM子卡。

运维网声明 1、欢迎大家加入本站运维交流群:群②:261659950 群⑤:202807635 群⑦870801961 群⑧679858003
2、本站所有主题由该帖子作者发表,该帖子作者与运维网享有帖子相关版权
3、所有作品的著作权均归原作者享有,请您和我们一样尊重他人的著作权等合法权益。如果您对作品感到满意,请购买正版
4、禁止制作、复制、发布和传播具有反动、淫秽、色情、暴力、凶杀等内容的信息,一经发现立即删除。若您因此触犯法律,一切后果自负,我们对此不承担任何责任
5、所有资源均系网友上传或者通过网络收集,我们仅提供一个展示、介绍、观摩学习的平台,我们不对其内容的准确性、可靠性、正当性、安全性、合法性等负责,亦不承担任何法律责任
6、所有作品仅供您个人学习、研究或欣赏,不得用于商业或者其他用途,否则,一切后果均由您自己承担,我们对此不承担任何法律责任
7、如涉及侵犯版权等问题,请您及时通知我们,我们将立即采取措施予以解决
8、联系人Email:admin@iyunv.com 网址:www.yunweiku.com

所有资源均系网友上传或者通过网络收集,我们仅提供一个展示、介绍、观摩学习的平台,我们不对其承担任何法律责任,如涉及侵犯版权等问题,请您及时通知我们,我们将立即处理,联系人Email:kefu@iyunv.com,QQ:1061981298 本贴地址:https://www.yunweiku.com/thread-539243-1-1.html 上篇帖子: cisco路由器NAT配置后相关PING操作问题求解? 下篇帖子: Cisco 配置微软CA服务器+SCEP
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

扫码加入运维网微信交流群X

扫码加入运维网微信交流群

扫描二维码加入运维网微信交流群,最新一手资源尽在官方微信交流群!快快加入我们吧...

扫描微信二维码查看详情

客服E-mail:kefu@iyunv.com 客服QQ:1061981298


QQ群⑦:运维网交流群⑦ QQ群⑧:运维网交流群⑧ k8s群:运维网kubernetes交流群


提醒:禁止发布任何违反国家法律、法规的言论与图片等内容;本站内容均来自个人观点与网络等信息,非本站认同之观点.


本站大部分资源是网友从网上搜集分享而来,其版权均归原作者及其网站所有,我们尊重他人的合法权益,如有内容侵犯您的合法权益,请及时与我们联系进行核实删除!



合作伙伴: 青云cloud

快速回复 返回顶部 返回列表