华为——路由故障排错

5290589

修改如下：　　[R1]int gi 0/0/2.1进入端口
　　[R1-GigabitEthernet0/0/2.1]undo ip address 删除原来ip地址配置
　　Jan 24 2018 15:40:06-08:00 R1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
　　on the interface GigabitEthernet0/0/2.1 has entered the DOWN state.
　　[R1-GigabitEthernet0/0/2.1]int gi 0/0/2.20进入子端口
　　[R1-GigabitEthernet0/0/2.20]undo ip address 删除原来ip地址配置
　　Jan 24 2018 15:41:20-08:00 R1 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
　　on the interface GigabitEthernet0/0/2.20 has entered the DOWN state.
　　[R1-GigabitEthernet0/0/2.20]undo dot1q termination vid 10删除封装协议操作
　　[R1-GigabitEthernet0/0/2.20]dot1q termination vid 20封装协议vlan20
　　[R1-GigabitEthernet0/0/2.20]ip address 192.168.20.254 255.255.255.0配置网关地址
　　Jan 24 2018 15:42:22-08:00 R1 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP
　　on the interface GigabitEthernet0/0/2.20 has entered the UP state.
　　[R1-GigabitEthernet0/0/2.20]arp broadcast enable 开启广播功能
　　[R1-GigabitEthernet0/0/2.20]int gi 0/0/0.10进入子端口
　　[R1-GigabitEthernet0/0/2.10]dot1q termination vid 10封装协议vlan10
　　[R1-GigabitEthernet0/0/2.10]ip address 192.168.10.254 255.255.255.0配置网关地址
　　Jan 24 2018 15:43:05-08:00 R1 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP
　　on the interface GigabitEthernet0/0/2.10 has entered the UP state.
　　[R1-GigabitEthernet0/0/2.10]arp broadcast enable 开启广播功能
　　[R1-GigabitEthernet0/0/2.10]
　　[R1]int gi 0/0/2.40进入子端口
　　[R1-GigabitEthernet0/0/2.40]dot1q termination vid 40封装协议vlan40
　　[R1-GigabitEthernet0/0/2.40]ip address 192.168.40.253 255.255.255.0配置ip地址
　　Jan 24 2018 15:48:04-08:00 R1 %%01IFNET/4/LINK_STATE(l)[4]:The line protocol IP
　　on the interface GigabitEthernet0/0/2.40 has entered the UP state.
　　[R1-GigabitEthernet0/0/2.40]arp broadcast enable 开启广播功能
　　[R1-GigabitEthernet0/0/2.40]q退出
　　[R1]int gi 0/0/0进入端口
　　[R1-GigabitEthernet0/0/0]ospf进入进程
　　[R1-GigabitEthernet0/0/0]ospf network-type broadcast配置ospf宣告方式为广播
　　[R1-GigabitEthernet0/0/0]q退出
　　[R1]ospf 进入进程
　　[R1-ospf-1]area 0进入区域0配置
　　[R1-ospf-1-area-0.0.0.0]network 192.168.10.0 0.0.0.255宣告网络范围
　　[R1-ospf-1-area-0.0.0.0]network 192.168.20.0 0.0.0.255宣告网络范围
　　[R1-ospf-1-area-0.0.0.0]network 192.168.40.0 0.0.0.255宣告网络范围
　　[R1-ospf-1-area-0.0.0.0]