VMware 克隆CentOS后无法启动网卡的解决

jyhrte

#首先要保证udev-post 启动
chkconfig --list|grep udev
udev-post 0:off 1:on 2:on 3:on 4:on 5:on 6:off
service udev-post start

#将原有的eth0那一行注释，然后将生成的eth1改为eth0
vim /etc/udev/rules.d/70-persistent-net.rules

# PCI device 0x8086:0x100f (e1000)
#SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0a:31:75:62:3c", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"

# PCI device 0x8086:0x100f (e1000)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0a:31:75:62:3c", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"

#最后修改网卡的配置文件
cat /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0
TYPE=Ethernet
UUID=cs802cs7-087a-af50-812b-f3d20053aa4a
ONBOOT=yes
NM_CONTROLLED=yes
BOOTPROTO=none
HWADDR=00:0a:31:75:62:3c        #修改MAC地址跟上面配置文件里面一样
IPADDR=192.168.1.100
PREFIX=24
GATEWAY=192.168.1.254
DNS1=202.103.24.68
DEFROUTE=yes
IPV4_FAILURE_FATAL=yes
IPV6INIT=no
NAME="System eth0"

#最后reboot系统