设为首页 收藏本站
查看: 1817|回复: 0

[经验分享] MYSQL-skip-networking

[复制链接]

尚未签到

发表于 2018-9-28 10:01:49 | 显示全部楼层 |阅读模式
  1、跳过tcp/ip协议通信:
  [mysqld]
  # The TCP/IP Port the MySQL Server will listen on
  port=3306
  #log_output=TABLE
  skip-networking  #添加这一行
  然后重启服务
  2、测试连接:
  C:\Documents and Settings\Administrator>mysql -u root -p
  Enter password:
  ERROR 2003 (HY000): Can't connect to MySQL server on 'localhost' (10061)
  可以看出连接mysql失败,那么我们没有了tcp/ip协议我们在本地如何连接呢?
  3、通过参数--protocol=pipe:
  C:\Documents and Settings\Administrator>mysql --protocol=pipe -u root -
  Enter password:
  ERROR 2017 (HY000): Can't open named pipe to host: .  pipe: MySQL (2)
  可以看出连接失败了!
  那么我们试试添加:enable-named-pipe
  如:
  [mysqld]
  # The TCP/IP Port the MySQL Server will listen on
  port=3306
  #log_output=TABLE
  skip-networking
  enable-named-pipe
  4、然后登陆:
  C:\Documents and Settings\Administrator>mysql --protocol=pipe -u root -p
  Enter password:
  Welcome to the MySQL monitor.  Commands end with ; or \g.

  Your MySQL connection>  Server version: 5.5.25-log MySQL Community Server (GPL)
  Copyright (c) 2000, 2011, Oracle and/or its affiliates. All rights reserved.
  Oracle is a registered trademark of Oracle Corporation and/or its
  affiliates. Other names may be trademarks of their respective
  owners.
  Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
  可以看出可以登陆了!
  4、
  my.ini配置:
  [mysqld]
  # The TCP/IP Port the MySQL Server will listen on
  port=3306
  #log_output=TABLE
  skip-networking
  shared_memory=ON
  #enable-named-pipe
  测试:
  TCP/IP连接:
  C:\Documents and Settings\Administrator>mysql -uroot -pw123123
  Welcome to the MySQL monitor.  Commands end with ; or \g.

  Your MySQL connection>  Server version: 5.5.25-log MySQL Community Server (GPL)
  Copyright (c) 2000, 2011, Oracle and/or its affiliates. All rights reserved.
  Oracle is a registered trademark of Oracle Corporation and/or its
  affiliates. Other names may be trademarks of their respective
  owners.
  Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
  内存方式连接:
  C:\Documents and Settings\Administrator>mysql -uroot -pw123123 --protocol=memory
  Welcome to the MySQL monitor.  Commands end with ; or \g.

  Your MySQL connection>  Server version: 5.5.25-log MySQL Community Server (GPL)
  Copyright (c) 2000, 2011, Oracle and/or its affiliates. All rights reserved.
  Oracle is a registered trademark of Oracle Corporation and/or its
  affiliates. Other names may be trademarks of their respective
  owners.
  Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
mysql 端口监听问题
  mysql 启动了,用 localhost 可以连接,但是用 127.0.0.1 不能连接。可能的原因是
  ① mysql为了增强安全性而跳过了端口监听,查看方法:
  用mysql> SHOW VARIABLES;或者 mysql> SHOW VARIABLES LIKE 'skip_networking';
  查看skip_networking,如果skip_networking=ON ,则到my.ini 中将 skip_networking 注释掉;
  ② 如果显示的是 OFF 则可能是绑定了监听 IP ,在设置文件中查找 bind_address ,如果有的话将其改为 bind_address= 0.0.0.0
  ③ 可能是权限问题,这个就上网找吧。。。


运维网声明 1、欢迎大家加入本站运维交流群:群②:261659950 群⑤:202807635 群⑦870801961 群⑧679858003
2、本站所有主题由该帖子作者发表,该帖子作者与运维网享有帖子相关版权
3、所有作品的著作权均归原作者享有,请您和我们一样尊重他人的著作权等合法权益。如果您对作品感到满意,请购买正版
4、禁止制作、复制、发布和传播具有反动、淫秽、色情、暴力、凶杀等内容的信息,一经发现立即删除。若您因此触犯法律,一切后果自负,我们对此不承担任何责任
5、所有资源均系网友上传或者通过网络收集,我们仅提供一个展示、介绍、观摩学习的平台,我们不对其内容的准确性、可靠性、正当性、安全性、合法性等负责,亦不承担任何法律责任
6、所有作品仅供您个人学习、研究或欣赏,不得用于商业或者其他用途,否则,一切后果均由您自己承担,我们对此不承担任何法律责任
7、如涉及侵犯版权等问题,请您及时通知我们,我们将立即采取措施予以解决
8、联系人Email:admin@iyunv.com 网址:www.yunweiku.com

所有资源均系网友上传或者通过网络收集,我们仅提供一个展示、介绍、观摩学习的平台,我们不对其承担任何法律责任,如涉及侵犯版权等问题,请您及时通知我们,我们将立即处理,联系人Email:kefu@iyunv.com,QQ:1061981298 本贴地址:https://www.yunweiku.com/thread-603118-1-1.html 上篇帖子: MySQL 5.7新支持--------Json类型实战 下篇帖子: MySQL简介与安装
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

扫码加入运维网微信交流群X

扫码加入运维网微信交流群

扫描二维码加入运维网微信交流群,最新一手资源尽在官方微信交流群!快快加入我们吧...

扫描微信二维码查看详情

客服E-mail:kefu@iyunv.com 客服QQ:1061981298


QQ群⑦:运维网交流群⑦ QQ群⑧:运维网交流群⑧ k8s群:运维网kubernetes交流群


提醒:禁止发布任何违反国家法律、法规的言论与图片等内容;本站内容均来自个人观点与网络等信息,非本站认同之观点.


本站大部分资源是网友从网上搜集分享而来,其版权均归原作者及其网站所有,我们尊重他人的合法权益,如有内容侵犯您的合法权益,请及时与我们联系进行核实删除!



合作伙伴: 青云cloud

快速回复 返回顶部 返回列表