php使用redis在windows下配置方法

cxin

　　Windows版的Redis可到此处下载，非官方版
　　http://code.google.com/p/servicestack/wiki/RedisWindowsDownload
　　redis.conf
　　复制以下===与====之内的内容
　　=================================
　　# Redis configuration file example
　　# By default Redis does not run as a daemon. Use 'yes' if you need it.
　　# Note that Redis will write a pid file in /var/run/redis.pid when daemonized.
　　daemonize no
　　# When run as a daemon, Redis write a pid file in /var/run/redis.pid by default.
　　# You can specify a custom pid file location here.
　　pidfile /var/run/redis.pid
　　# Accept connections on the specified port, default is 6379
　　port 6379
　　# If you want you can bind a single interface, if the bind option is not
　　# specified all the interfaces will listen for connections.
　　#
　　# bind 127.0.0.1

　　# Close the connection after a client is>　　timeout 300
　　# Set server verbosity to 'debug'
　　# it can be one of:
　　# debug (a lot of information, useful for development/testing)
　　# notice (moderately verbose, what you want in production probably)
　　# warning (only very important / critical messages are logged)
　　loglevel debug
　　# Specify the log file name. Also 'stdout' can be used to force
　　# the demon to log on the standard output. Note that if you use standard
　　# output for logging but daemonize, logs will be sent to /dev/null
　　logfile stdout
　　# Set the number of databases. The default database is DB 0, you can select
　　# a different one on a per-connection basis using SELECT  where
　　# dbid is a number between 0 and 'databases'-1
　　databases 16
　　################################ SNAPSHOTTING  #################################
　　#
　　# Save the DB on disk:
　　#
　　#   save  
　　#
　　#   Will save the DB if both the given number of seconds and the given
　　#   number of write operations against the DB occurred.
　　#
　　#   In the example below the behaviour will be to save:
　　#   after 900 sec (15 min) if at least 1 key changed
　　#   after 300 sec (5 min) if at least 10 keys changed
　　#   after 60 sec if at least 10000 keys changed
　　save 900 1
　　save 300 10
　　save 60 10000
　　# Compress string objects using LZF when dump .rdb databases?
　　# For default that's set to 'yes' as it's almost always a win.
　　# If you want to save some CPU in the saving child set it to 'no' but
　　# the dataset will likely be bigger if you have compressible values or keys.
　　rdbcompression yes
　　# The filename where to dump the DB
　　dbfilename dump.rdb
　　# For default save/load DB in/from the working directory
　　# Note that you must specify a directory not a file name.
　　dir ./
　　################################# REPLICATION #################################
　　# Master-Slave replication. Use slaveof to make a Redis instance a copy of
　　# another Redis server. Note that the configuration is local to the slave
　　# so for example it is possible to configure the slave to save the DB with a
　　# different interval, or to listen to another port, and so on.
　　#
　　# slaveof  
　　# If the master is password protected (using the "requirepass" configuration
　　# directive below) it is possible to tell the slave to authenticate before
　　# starting the replication synchronization process, otherwise the master will
　　# refuse the slave request.
　　#
　　# masterauth
　　################################## SECURITY ###################################
　　# Require clients to issue AUTH  before processing any other
　　# commands.  This might be useful in environments in which you do not trust
　　# others with access to the host running redis-server.
　　#
　　# This should stay commented out for backward compatibility and because most
　　# people do not need auth (e.g. they run their own servers).
　　#
　　# requirepass foobared
　　################################### LIMITS ####################################
　　# Set the max number of connected clients at the same time. By default there
　　# is no limit, and it's up to the number of file descriptors the Redis process
　　# is able to open. The special value '0' means no limts.
　　# Once the limit is reached Redis will close all the new connections sending
　　# an error 'max number of clients reached'.
　　#
　　# maxclients 128
　　# Don't use more memory than the specified amount of bytes.
　　# When the memory limit is reached Redis will try to remove keys with an
　　# EXPIRE set. It will try to start freeing keys that are going to expire
　　# in little time and preserve keys with a longer time to live.
　　# Redis will also try to remove objects from free lists if possible.
　　#
　　# If all this fails, Redis will start to reply with errors to commands
　　# that will use more memory, like SET, LPUSH, and so on, and will continue
　　# to reply to most read-only commands like GET.
　　#

　　# WARNING: maxmemory can be a good>　　# 'state' server or cache, not as a real DB. When Redis is used as a real
　　# database the memory usage will grow over the weeks, it will be obvious if
　　# it is going to use too much memory in the long run, and you'll have the time
　　# to upgrade. With maxmemory after the limit is reached you'll start to get
　　# errors for write operations, and this may even lead to DB inconsistency.
　　#
　　# maxmemory
　　############################## APPEND ONLY MODE ###############################
　　# By default Redis asynchronously dumps the dataset on disk. If you can live

　　# with the>　　# happens this is the preferred way to run Redis. If instead you care a lot
　　# about your data and don't want to that a single record can get lost you should
　　# enable the append only mode: when this mode is enabled Redis will append
　　# every write operation received in the file appendonly.log. This file will
　　# be read on startup in order to rebuild the full dataset in memory.
　　#
　　# Note that you can have both the async dumps and the append only file if you
　　# like (you have to comment the "save" statements above to disable the dumps).
　　# Still if append only mode is enabled Redis will load the data from the
　　# log file at startup ignoring the dump.rdb file.
　　#
　　# The name of the append only file is "appendonly.log"
　　#
　　# IMPORTANT: Check the BGREWRITEAOF to check how to rewrite the append
　　# log file in background when it gets too big.
　　appendonly no
　　# The fsync() call tells the Operating System to actually write data on disk
　　# instead to wait for more data in the output buffer. Some OS will really flush
　　# data on disk, some other OS will just try to do it ASAP.
　　#
　　# Redis supports three different modes:
　　#
　　# no: don't fsync, just let the OS flush the data when it wants. Faster.
　　# always: fsync after every write to the append only log . Slow, Safest.
　　# everysec: fsync only if one second passed since the last fsync. Compromise.
　　#
　　# The default is "always" that's the safer of the options. It's up to you to

　　# understand if you can>　　# or to "no" that will let the operating system flush the output buffer when

　　# it want, for better performances (but if you can live with the>　　# some data loss consider the default persistence mode that's snapshotting).
　　appendfsync always
　　# appendfsync everysec
　　# appendfsync no
　　############################### ADVANCED CONFIG ###############################
　　# Glue small output buffers together in order to send small replies in a
　　# single TCP packet. Uses a bit more CPU but most of the times it is a win
　　# in terms of number of queries per second. Use 'yes' if unsure.
　　glueoutputbuf yes
　　# Use object sharing. Can save a lot of memory if you have many common
　　# string in your dataset, but performs lookups against the shared objects
　　# pool so it uses more CPU and can be a bit slower. Usually it's a good

　　#>　　#
　　# When object sharing is enabled (shareobjects yes) you can use

　　# shareobjectspoolsize to control the>
　　# object sharing. A bigger pool>　　# In general you want this value to be at least the double of the number of
　　# very common strings you have in your dataset.
　　#
　　# WARNING: object sharing is experimental, don't enable this feature
　　# in production before of Redis 1.0-stable. Still please try this feature in
　　# your development environment so that we can test it better.
　　# shareobjects no
　　# shareobjectspoolsize 1024
　　================================================
　　将以上内容存储为redis.conf
　　解压下载的redis包。我的windows下的解压地址是D:\redis-2.0.2
　　将redis.conf 拷贝到D:\redis-2.0.2\下
　　指定redis的配置文件，如没有指定，则使用默认设置
　　D:\redis-2.0.2>redis-server.exe redis.conf
　　如下图则开启正常

file:///C:%5CUsers%5CZHENG~1.YON%5CAppData%5CLocal%5CTemp%5Cmsohtmlclip1%5C01%5Cclip_image001.jpg

　　新开一个cmd命令窗口
　　redis-cli.exe：命令行客户端，测试用
　　D:\redis-2.0.2>redis-cli.exe -h 192.168.10.59 -p 6379
　　192.168.10.59 是我本地的地址
　　如下图则

file:///C:%5CUsers%5CZHENG~1.YON%5CAppData%5CLocal%5CTemp%5Cmsohtmlclip1%5C01%5Cclip_image002.jpg

　　玩redis吧~~

file:///C:%5CUsers%5CZHENG~1.YON%5CAppData%5CLocal%5CTemp%5Cmsohtmlclip1%5C01%5Cclip_image003.jpg

在windows下安装php的redis扩展非常简单,下载一个.dll扩展包放到php的ext目录下,在php.ini里边添加一行配置就可以了.

http://ishare.iask.sina.com.cn/f/23044929.html?from=like

下载 php_redis.dll 文件解压并放到php的ext目录下,打开php.ini,

增加一行：extension=php_redis.dll

然后,重启apache或者nginx或者IIS就可以了.

检测是否安装成功,可以打开phpinfo看下redis配置，

下面是php测试redis方法，更多使用请搜51cto文档