[root@lamp113 ~]# tar jxf eaccelerator-0.9.6.tar.bz2
[root@lamp113 ~]# cd eaccelerator-0.9.6
[root@lamp113 eaccelerator-0.9.6]# /usr/local/php/bin/phpize -v
Configuring for:
PHP Api Version: 20090626
Zend Module Api No: 20090626
Zend Extension Api No: 220090626
[root@lamp113 eaccelerator-0.9.6]# ./configure --enable-eaccelerator=shared --with-php-config=/usr/local/php/bin/php-config
过程省略.........
creating libtool
appending configuration tag "CXX" to libtool
configure: creating ./config.status
config.status: creating config.h
config.status: config.h is unchanged
[root@lamp113 eaccelerator-0.9.6]# make && make install
Installing shared extensions: /usr/local/php/lib/php/extensions/no-debug-zts-20090626/
[root@lamp113 eaccelerator-0.9.6]# ll /usr/local/php/lib/php/extensions/no-debug-zts-20090626/
total 388
-rwxr-xr-x. 1 root root 395853 Dec 28 11:35 eaccelerator.so 出现此模块表示安装成功
[root@lamp113 eaccelerator-0.9.6]#
~~~~~~~~~~~~~~配置php加载eaccelerator~~~~~~~~~~~~~~~~
[root@lamp113 ~]# vim /usr/local/php/lib/php.ini +891
#把找到extension_dir = 字段 把后面的路径修改成 你安装的缓存模块的绝对路径
#extension_dir = extension_dir = "/usr/local/php/lib/php/extensions/no-debug-zts-20090626"
#在最底部追加
;;;;;;;;;;;;;;;eaccelerator;;;;;;;;;;;;;;
[eaccelerator]
extension=eaccelerator.so
eaccelerator.shm_size=64
eaccelerator.cache_dir=/tmp/eaccelerator
eaccelerator.enable=1
eaccelerator.optimizer=1
eaccelerator.check_mtime=1
eaccelerator.debug=0
eaccelerator.filter=
eaccelerator.shm_max=0
eaccekerator.shm_ttl=3600
eaccelerator.shm_prune_period=3600
eaccelerator.shm_only=0
eaccelerator.compress=1
eaccelerator.compress_level=9
[root@lamp113 ~]# mkdir -p /tmp/eaccelerator;chown apache:apache /tmp/eaccelerator #创建缓存目录并把它的属主和用户组改为apache使用的用户和组
[root@lamp113 ~]# /usr/local/php/bin/php -v
PHP 5.3.13 (cli) (built: Nov 18 2012 13:42:57)
Copyright (c) 1997-2012 The PHP Group
Zend Engine v2.3.0, Copyright (c) 1998-2012 Zend Technologies
with eAccelerator v0.9.6, Copyright (c) 2004-2010 eAccelerator, by eAccelerator
#出现上面的with eAccelerator 字段 就表示安装加载成功
#成功后缓存目录/tem/eaccelerator里面会出现0.1.2....a.b.c等目录
[root@lamp113 ~]# ll /tmp/eaccelerator/
total 64
drwxrwxrwx. 18 root root 4096 Dec 28 11:47 0
drwxrwxrwx. 18 root root 4096 Dec 28 11:47 1
drwxrwxrwx. 18 root root 4096 Dec 28 11:47 2
drwxrwxrwx. 18 root root 4096 Dec 28 11:47 3
drwxrwxrwx. 18 root root 4096 Dec 28 11:47 4
drwxrwxrwx. 18 root root 4096 Dec 28 11:47 5
drwxrwxrwx. 18 root root 4096 Dec 28 11:47 6
drwxrwxrwx. 18 root root 4096 Dec 28 11:47 7
drwxrwxrwx. 18 root root 4096 Dec 28 11:47 8
drwxrwxrwx. 18 root root 4096 Dec 28 11:47 9
drwxrwxrwx. 18 root root 4096 Dec 28 11:47 a
drwxrwxrwx. 18 root root 4096 Dec 28 11:47 b
drwxrwxrwx. 18 root root 4096 Dec 28 11:47 c
drwxrwxrwx. 18 root root 4096 Dec 28 11:47 d
drwxrwxrwx. 18 root root 4096 Dec 28 11:47 e
drwxrwxrwx. 18 root root 4096 Dec 28 11:47 f
#自己在web目录下添加一个index.php，里面是phpinfo()函数,访问一下，发现打不开了！
#查看日志文件发现如下错误提示：
[root@lamp113 ~]# cat /usr/local/apache/logs/error_log
~~~~~~~~~~~省略大部分日志
[Sun Nov 18 18:09:10 2012] [error] [client 192.168.137.1] PHP Warning: phpinfo(): It is not safe to rely on the system's timezone settings.
You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you
are still getting this warning, you most likely misspelled the timezone identifier.
#解决方法：
#php.ini中设置的eAccelerator，eaccelerator.shm_size="64"，解释：eaccelerator可使用的共享内存大小(单位为MB)，即64M
#在Linux下，单个进程的最大内存使用量受/proc/sys/kernel/shmmax中设置的数字限制(单位为字节) /proc/sys/kernel/shmmax = 33554432 （32M）
#vim /etc/sysctl.conf
#kernel.shmmax = 250000000 #没有这参数的自己添加，这个值是我乱写的，具体请根据自己的生产环境而定！
#sysctl -p
[root@lamp113 ~]# /usr/local/apache/bin/apachectl graceful
#再访问一次能打开和显示phpinfo了
[root@lamp113 ~]# tree /tmp/eaccelerator/
/tmp/eaccelerator/
#省略大部分...
|-- 5
| |-- 0
| |-- 1
| |-- 2
| |-- 3
| |-- 4
| |-- 5
| |-- 6
| |-- 7
| |-- 8
| |-- 9
| |-- a
| | `-- eaccelerator-86746.053614
| |-- b
| |-- c
| |-- d
| |-- e
| `-- f
#省略大部分... 出现这个表示成功了加载进缓存了
#php5.3.10和5.3.13可用这插件的0.9.6版本，如果使用0.9.5.2版本在make阶段会报错（php5.2可以用）
~~~~~~~~~~~~~~~~~~~~~~~~memcache缓存扩展~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[root@lamp113 ~]# wget http://fastlnmp.googlecode.com/files/memcache-2.2.5.tgz
--2012-12-28 12:18:55-- http://fastlnmp.googlecode.com/files/memcache-2.2.5.tgz
Resolving fastlnmp.googlecode.com... 74.125.128.82, 2404:6800:4005:c00::52
Connecting to fastlnmp.googlecode.com|74.125.128.82|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 35981 (35K) [application/x-gzip]
Saving to: `memcache-2.2.5.tgz'
100%[======================================>] 35,981 114K/s in 0.3s
2012-12-28 12:18:56 (114 KB/s) - `memcache-2.2.5.tgz' saved [35981/35981]
[root@lamp113 ~]# tar zxf memcache-2.2.5.tgz
[root@lamp113 ~]# cd memcache-2.2.5/
[root@lamp113 memcache-2.2.5]# /usr/local/php/bin/phpize
Configuring for:
PHP Api Version: 20090626
Zend Module Api No: 20090626
Zend Extension Api No: 220090626
[root@lamp113 memcache-2.2.5]# ./configure --with-php-config=/usr/local/php/bin/php-config
#省略编译过程
[root@lamp113 memcache-2.2.5]# make && make install
[root@lamp113 ~]# wget http://fastlnmp.googlecode.com/files/PDO_MYSQL-1.0.2.tgz
--2012-12-28 12:36:23-- http://fastlnmp.googlecode.com/files/PDO_MYSQL-1.0.2.tgz
Resolving fastlnmp.googlecode.com... 74.125.128.82, 2404:6800:4005:c00::52
Connecting to fastlnmp.googlecode.com|74.125.128.82|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 14778 (14K) [application/x-gzip]
Saving to: `PDO_MYSQL-1.0.2.tgz'
100%[============================================================================================================================================>] 14,778 --.-K/s in 0.02s
100%[============================================================================================================================================>] 13,859,332 907K/s in 18s
[root@lamp113 ~]# tar zxf ImageMagick.tar.gz
[root@lamp113 ~]# cd ImageMagick
-bash: cd: ImageMagick: No such file or directory
[root@lamp113 ~]# cd ImageMagick
ImageMagick-6.8.1-4/ ImageMagick.tar.gz
[root@lamp113 ~]# cd ImageMagick-6.5.1-2/
[root@lamp113 ImageMagick-6.5.1-2]# ls
AUTHORS.txt Install-unix.txt Magick++ NEWS.txt QuickStart.txt common.shi.in filters magick tests winpath.sh
ChangeLog Install-vms.txt Magickshr.opt NOTICE README.txt config images magick.sh.in utilities www
ImageMagick.spec.in Install-windows.txt Makefile.am PerlMagick aclocal.m4 configure index.html scenes version.sh
Install-mac.txt LICENSE Makefile.in Platforms.txt coders configure.ac m4 scripts wand
[root@lamp113 ImageMagick-6.5.1-2]# ./configure
#过程省略
[root@lamp113 ImageMagick-6.5.1-2]# make
#我第一次编译的时候碰到了一次错误，
#错误的大概内容是关于perl 和perl5 的 那次我解决的办法是yum install perl-devel -y
#希望对新手有帮助
[root@lamp113 ImageMagick-6.5.1-2]# make install
#这个装完就不用管了 我装ImageMagick6.8版本的 后面的imagick-2.3.0就完全编译不过去，试了好久都没解决
#google和baidu 都翻到10几页 ，没一个正确的 没办法只好装ImageMagick-6.5版本的
[root@lamp113 ~]# wget http://unmp.googlecode.com/files/imagick-2.3.0.tgz
--2012-12-28 13:24:21-- http://unmp.googlecode.com/files/imagick-2.3.0.tgz
Resolving unmp.googlecode.com... 74.125.128.82, 2404:6800:4008:c00::52
Connecting to unmp.googlecode.com|74.125.128.82|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 86976 (85K) [application/x-gzip]
Saving to: `imagick-2.3.0.tgz'
100%[============================================================================================================================================>] 86,976 166K/s in 0.5s
[root@lamp113 ~]# tar zxf imagick-2.3.0.tgz
[root@lamp113 ~]# cd imagick-2.3.0
[root@lamp113 imagick-2.3.0]# /usr/local/php/bin/phpize
Configuring for:
PHP Api Version: 20090626
Zend Module Api No: 20090626
Zend Extension Api No: 220090626
[root@lamp113 imagick-2.3.0]# ./configure --with-php-config=/usr/local/php/bin/php-config
[root@lamp112 imagick-2.3.0]# make && make install
#编译过程省略
Installing shared extensions: /usr/local/php/lib/php/extensions/no-debug-zts-20090626/
[root@lamp112 imagick-2.3.0]# ll /usr/local/php/lib/php/extensions/no-debug-zts-20090626/
total 2288
-rwxr-xr-x. 1 root root 395853 Dec 11 17:27 eaccelerator.so
-rwxr-xr-x. 1 root root 1122253 Dec 29 21:56 imagick.so #出现这个模块表示安装成功
-rwxr-xr-x. 1 root root 237602 Dec 11 17:41 memcache.so
-rwxr-xr-x. 1 root root 153692 Dec 11 17:57 pdo_mysql.so
-rwxr-xr-x. 1 root root 423635 Dec 11 20:29 xcache.so
[root@lamp112 imagick-2.3.0]#
#在php.ini配置文件的eaccelerator配置段上面添加一行
#extension = imagick.so
~~~~~~~~~~~~~~~~~~安装Xcache缓存加速~~~~~~~~~~~~~~~~~~~~
[root@lamp113 ~]# wget http://xcache.lighttpd.net/pub/Releases/1.3.2/xcache-1.3.2.tar.gz
--2012-12-28 16:42:07-- http://xcache.lighttpd.net/pub/Releases/1.3.2/xcache-1.3.2.tar.gz
Resolving xcache.lighttpd.net... 188.40.103.19, 2a01:4f8:100:8082::2
Connecting to xcache.lighttpd.net|188.40.103.19|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 113715 (111K) [application/octet-stream]
Saving to: `xcache-1.3.2.tar.gz'
100%[===================================================================================================================================================>] 113,715 72.3K/s in 1.5s
QQ群⑧：
窥视卡
雷达卡
发表于 2018-12-24 08:25:32
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
千斤顶
显身卡