keepalived的log日志设置

cheng029

　　修改：/etc/sysconfig/keepalived，然后用service来启动。

• [root@LVS02 ~]# cat /etc/sysconfig/keepalived  
  
• # Options for keepalived. See `keepalived --help' output and keepalived(8) and
  
• # keepalived.conf(5) man pages for a list of all options. Here are the most
  
• # common ones :
  
• #
  
• # --vrrp               -P    Only run with VRRP subsystem.
  
• # --check              -C    Only run with Health-checker subsystem.
  
• # --dont-release-vrrp  -V    Dont remove VRRP VIPs & VROUTEs on daemon stop.
  
• # --dont-release-ipvs  -I    Dont remove IPVS topology on daemon stop.
  
• # --dump-conf          -d    Dump the configuration data.
  
• # --log-detail         -D    Detailed log messages.
  
• # --log-facility       -S    0-7 Set local syslog facility (default=LOG_DAEMON)
  
• #
  
• 
  
• KEEPALIVED_OPTIONS="-D -d -S 0"
  
• 
  
• [root@LVS02 ~]# service keepalived start
  

　　最后设置syslog，修改/etc/syslog.conf.

• root@LVS02 ~]# cat /etc/syslog.conf
  
• # Log all kernel messages to the console.
  
• # Logging much else clutters up the screen.
  
• #kern.*                         /dev/console
  
• 
  
• # Log anything (except mail) of level info or higher.
  
• # Don't log private authentication messages!
  
• *.info;mail.none;authpriv.none;cron.none        /var/log/messages
  
• 
  
• # The authpriv file has restricted access.
  
• authpriv.*                      /var/log/secure
  
• 
  
• # Log all the mail messages in one place.
  
• mail.*                          -/var/log/maillog
  
• 
  
• 
  
• # Log cron stuff
  
• cron.*                          /var/log/cron
  
• 
  
• # Everybody gets emergency messages
  
• *.emerg                         *
  
• 
  
• # Save news errors of level crit and higher in a special file.
  
• uucp,news.crit                      /var/log/spooler
  
• 
  
• # Save boot messages also to boot.log
  
• local7.*                        /var/log/boot.log
  
• 
  
• # keepalived -S 0
  
• local0.*                                                /var/log/keepalived.log
  

　　重启syslog，设置完成。
　　# /etc/init.d/syslog restart