GlusterFS无法启动原因及处理方案

Mrfei

　　启动结果：
　　Redirecting to /bin/systemctl status  glusterd.service
glusterd.service - GlusterFS, a clustered file-system server
   Loaded: loaded (/usr/lib/systemd/system/glusterd.service; enabled)
   Active: failed (Result: exit-code) since Fri 2014-09-26 01:47:54 EDT; 5min ago
  Process: 25116 ExecStart=/usr/sbin/glusterd -p /run/glusterd.pid (code=exited, status=1/FAILURE)
　　Sep 26 01:47:54 datasvr1 systemd[1]: glusterd.service: control process exited, code=exited status=1
Sep 26 01:47:54 datasvr1 systemd[1]: Failed to start GlusterFS, a clustered file-system server.
Sep 26 01:47:54 datasvr1 systemd[1]: Unit glusterd.service entered failed state.
　　

　　原因：
　　glusterfs配置文件(/etc/glusterfs/glusterd.vol)出现问题
　　出现问题时的配置信息为：
　　volume management
        type mgmt/glusterd
　　#working-directory的位置为/var/lib/glusterfsd
        option working-directory /var/lib/glusterfsd
　　option transport-type socket,rdma
　　option transport.socket.keepalive-time 10
         option transport.socket.keepalive-interval 2
         option transport.socket.read-fail-log off
    end-volume
　　处理方法：
　　将working-directory的位置修改为配置文件所在位置（即为/etc/glusterfs)
　　修改后的配置信息为：
　　volume management
    type mgmt/glusterd
    option working-directory /etc/glusterfs
    option transport-type socket,rdma
    option transport.socket.keepalive-time 10
    option transport.socket.keepalive-interval 2
    option transport.socket.read-fail-log off
#   option base-port 49152
end-volume