CentOS7修改网卡为eth0

娇w兴

　　[size=1.3em]1.[size=1.3em]编辑网卡信息
[root@linux-node2~]# cd /etc/sysconfig/network-scripts/  #进入网卡目录
[root@linux-node2network-scripts]# mv ifcfg-eno16777728 ifcfg-eth0  #重命名网卡名称
[root@linux-node2 network-scripts]# cat ifcfg-eth0  #编辑网卡信息
TYPE=Ethernet
BOOTPROTO=static
DEFROUTE=yes
PEERDNS=yes
PEERROUTES=yes
IPV4_FAILURE_FATAL=no
NAME=eth0  #name修改为eth0
ONBOOT=yes
IPADDR=192.168.56.12
NETMASK=255.255.255.0
GATEWAY=192.168.56.2
DNS1=192.168.56.2
2.修改grub
[root@linux-node2 ~]# cat /etc/sysconfig/grub  #编辑内核信息,添加红色字段的
GRUB_TIMEOUT=5
GRUB_DEFAULT=saved
GRUB_DISABLE_SUBMENU=true
GRUB_TERMINAL_OUTPUT="console"
GRUB_CMDLINE_LINUX="crashkernel=auto rhgb net.ifnames=0 biosdevname=0 quiet"
GRUB_DISABLE_RECOVERY="true"
[root@linux-node2 ~]# grub2-mkconfig -o /boot/grub2/grub.cfg #生成启动菜单
Generating
grub configuration file ...
Found
linux image: /boot/vmlinuz-3.10.0-229.el7.x86_64
Found
initrd image: /boot/initramfs-3.10.0-229.el7.x86_64.img
Found
linux image: /boot/vmlinuz-0-rescue-1100f7e6c97d4afaad2e396403ba7f61
Found
initrd image: /boot/initramfs-0-rescue-1100f7e6c97d4afaad2e396403ba7f61.img
Done
3.验证是否修改成功
[root@linux-node2 ~]# reboot  #必须重启系统生效
[root@linux-node2 ~]# yum install net-tools  #默认centos7不支持ifconfig 需要看装net-tools包
[root@linux-node2 ~]# ifconfig eth0  #在次查看网卡信息
eth0:
flags=4163  mtu 1500
        inet 192.168.56.12  netmask 255.255.255.0  broadcast 192.168.56.255
        inet6 fe80::20c:29ff:fe5c:7bb1  prefixlen 64
scopeid 0x20
        ether 00:0c:29:5c:7b:b1  txqueuelen 1000  (Ethernet)
        RX packets 152  bytes 14503 (14.1 KiB)
        RX errors 0  dropped 0
overruns 0  frame 0
        TX packets 98  bytes 14402 (14.0 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0
collisions 0