pgbouncer centos7.4 install

kient88

　　编辑器原因 ‘-#’符号需要去掉‘-’
　　-# yum install -y deltarpm
-# yum install -y openssl-devel zlib-devel readlinie-devel gcc-c++ libevent-devel
-# ./configure --prefix=/opt/pgbouncer/1.8.1
-# make
-# make install
　　-# cd /opt/pgbouncer/1.8.1/
-# mkdir log etc run tmp
-# ls
bin  etc  log  run  share  tmp
-#
-# cp share/doc/pgbouncer/pgbouncer.ini etc/
-# cp share/doc/pgbouncer/userlist.txt etc/
-#
　　-# vi /opt/pgbouncer/1.8.1/etc/pgbouncer.ini
-#### modify ####
[databases]
-#### total_pool_size = pool_size + reserve_pool_size ####
testdb = port=5432 dbname=testdb pool_size=2 user=testuser password=testuser
　　[pgbouncer]
logfile = /opt/pgbouncer/1.8.1/log/pgbouncer.log
pidfile = /opt/pgbouncer/1.8.1/run/pgbouncer.pid
listen_addr = 0.0.0.0
unix_socket_dir = /opt/pgbouncer/1.8.1/tmp
auth_type = md5
auth_file = /opt/pgbouncer/1.8.1/etc/userlist.txt
admin_users = pgbadmin
pool_mode = transaction
server_reset_query = RESET ALL
server_reset_query_always = 1
ignore_startup_parameters = extra_float_digits
max_client_conn = 1000
default_pool_size = 2
min_pool_size = 1
reserve_pool_size = 1
pkt_buf = 8192
listen_backlog = 65535
　　-# vi /opt/pgbouncer/1.8.1/etc/userlist.txt
　　"pgbadmin" "pgbouncer"
"user01" "user01"
　　日志配置
　　-# vi pgbouncer
/opt/pgbouncer/1.8.1/log/pgbouncer.log
{
missingok
nocompress
notifempty
sharedscripts
create 0640 postgres postgres
daily
rotate 10
postrotate
/bin/kill -HUP cat /opt/pgbouncer/1.8.1/run/pgbouncer.pid  2>/dev/null 2> /dev/null || true
endscript
}
-#
　　启动脚本
　　-# vi /usr/lib/systemd/system/pgbouncer.service
-##### file content start ####
-# It's not recommended to modify this file in-place, because it will be
-# overwritten during package upgrades.  If you want to customize, the
-# best way is to create a file "/etc/systemd/system/pgbouncer.service",
-# containing
-#       .include /lib/systemd/system/pgbouncer.service
-#       ...make your changes here...
-# For more info about custom unit files, see
-# http://fedoraproject.org/wiki/Systemd#How_do_I_customize_a_unit_file.2F_add_a_custom_unit_file.3F
　　[Unit]
Description=A lightweight connection pooler for PostgreSQL
After=syslog.target
After=network.target
　　[Service]
Type=forking
　　User=postgres
Group=postgres
　　-# Path to the init file
Environment=BOUNCERCONF=/opt/pgbouncer/1.8.1/etc/pgbouncer.ini
　　PIDFile=/opt/pgbouncer/1.8.1/run/pgbouncer.pid
　　-# Where to send early-startup messages from the server
-# This is normally controlled by the global default set by systemd
-# StandardOutput=syslog
　　ExecStart=/opt/pgbouncer/1.8.1/bin/pgbouncer -d -q ${BOUNCERCONF}
ExecReload=/usr/bin/kill -HUP $MAINPID
KillSignal=SIGINT
　　-# Give a reasonable amount of time for the server to start up/shut down
TimeoutSec=300
　　[Install]
WantedBy=multi-user.target
-##### content end ####
　　-# chmod +x /usr/lib/systemd/system/pgbouncer.service